Hi All,

Please tell me how do I order Windows XP packet data service 2?

Thanks

I have a Atmel AVRONE!

Hi All,

I am using BCM 5395S ( 5-port giga switch) switch in my project. In that If i enable the 8021q ( to separate one port from other 4 ports) , then I am getting a lot of frame loss in IXIA tests. Can any one one point me some settings that I have to make additionally other than setting the forward and un-tag maps, to avoid these frame losses.

Hi,

hi all,
Is there any structure in windows similiar to struct net_device in Linux

how to create a C coding to implement a task scheduler.. if anybody can help me.... send a mail to priya.jas26@gmail.com

hi all
can anyone tell me the API for giving millisecond delay,similiar to NdisMsleep() API

Looking in the San Diego area. Experience with PCI, PCIe and USB buses and DMA would be great...WDM, DDK, etc...

hi could somebody help me in accessing the extended configuration of
a pci express device.I need the coding for windows.I tried using the GetBusData by passing the IRP ,IRP_MN_CONFIG_READ,but i could only access the 256 bytes.It's very urgent

Hello,
Usb mic on linux-2.6.10 not detected,only usb headphone is detected..The lsusb-v will not list the usb microphone..

Any suggestions for the detection?
Thank u

I came across peculiar situation which I posted and discussed here:

http://www.unix.com/high-level-programming/81568-semaphore-access-speed....

That discussion did not produce any results, so I want to try it here. In short, I am measuring the speed of system's ability to create a process, which simply accesses a semaphore and dies.

Results are:

Hi Ho!

$ pwd
/home/eus/shared/

$ ls
./
../
inside/

$ ls inside
./
../
.a/
.b/
x/
y/

If I want to move the whole content of /home/eus/shared/inside/ into /home/eus/shared/ including the hidden files, what command should I issue?

I cannot do the following ones:
$ mv -i -- inside/. ./ (ERROR: cannot overwrite ./.)

Hi,
I am using D-Link DWL-g122 WiFi card with ralink RT73 drivers. I cant sniff packets which are not destined for my machine. (I am using wireshark). when i read my log file i find

Sep 20 13:23:57 localhost kernel: device eth1 entered promiscuous mode
Sep 20 13:26:37 localhost kernel: device eth1 left promiscuous mode

What populates the BIOS Parameter Block (BPB) in the MBR? Looking at the code in GRUB-0.97 the stage1.S code just fills this block with zeros. However when looking at the MBR the BPB is filled with data.
Does the data get placed there when grub-0.97 is installed as a bootloader?

Thanks.

Hi

I have a problem to detect the USB flash device (USB Flash Drive A-Data 16Gb ) to Fedora9. In WinXP and VISTA this flash card is working properly.

All other USB devices are working properly.

dmesg | tail

usb usb1: SerialNumber: 0000:00:1d.7
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0