Hello,
This is an example setup using an entire disk volume.
# modprobe -v reiser4
insmod
/lib/modules/2.6.36.2-56-vanilla/kernel/lib/zlib_deflate/zlib_deflate.ko
insmod /lib/modules/2.6.36.2-56-vanilla/kernel/lib/lzo/lzo_compress.ko
insmod /lib/modules/2.6.36.2-56-vanilla/kernel/fs/reiser4/reiser4.ko
After adding in disk via usb
[ 51.488771] usb 1-1.2: new high speed USB device using ehci_hcd and
address 5
[ 51.584116] usb 1-1.2: New USB device found, idVendor=04fc,
idProduct=0c25
[ 51.584123] usb 1-1.2: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 51.584129] usb 1-1.2: Product: USB to Serial-ATA bridge
[ 51.584135] usb 1-1.2: Manufacturer: Sunplus Technology Inc.
[ 51.584139] usb 1-1.2: SerialNumber: ST31000333 5TE04R8W
[ 51.618433] Initializing USB Mass Storage driver...
[ 51.619594] scsi8 : usb-storage 1-1.2:1.0
[ 51.619859] usbcore: registered new interface driver usb-storage
[ 51.619862] USB Mass Storage support registered.
[ 52.628635] scsi 8:0:0:0: Direct-Access ST310003 33AS
PQ: 0 ANSI: 2
[ 52.629100] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 52.631208] sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 52.640218] sd 8:0:0:0: [sdb] Write Protect is off
[ 52.640225] sd 8:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 52.640228] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 52.644589] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 52.669352] sdb: sdb1
[ 52.673154] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 52.673162] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 145.972234] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
# mkfs.reiser4 -o create=ccreg40,compress=lzo1 /dev/sdb -fy
# fsck.reiser4 --fix /dev/sdb -y
*******************************************************************
This is an EXPERIMENTAL version of fsck.reiser4. Read README ...
