Hello, 
I can't make openocd work with my neo.

I checked carefully cables, use several usb port and have

mainly test with a self-powered hub.

When I plug the usb cable in the debug board or launch openocd, the

screen of the neo flashes white. Sometimes, it just stay white when

plugging the board on the pc.

Is-it a good behaviour ?
I try to use openocd with this configuration, and tried with changing

speed to 0,4,8 : 
telnet_port 4444

gdb_port 3333

interface ft2232

jtag_speed 0

ft2232_vid_pid 0x1457 0x5118

ft2232_layout "jtagkey"

reset_config trst_and_srst

jtag_device 4 0x1 0xf 0xe

daemon_startup attach

target arm920t little reset_run 0 arm920t

working_area 0 0x200000 0x4000 backup

run_and_halt_time 0 5000
You can found the output of openocd here :

http://pastebin.com/m2e2b52b9
The version of openocd I tried was the ubuntu one, and the static one

made by bitbake with the fso-makefile configuration.
--

Frederic Leroy
_______________________________________________

Openmoko community mailing list

community@lists.openmoko.org

http://lists.openmoko.org/mailman/listinfo/community