Hi all,

I'm a newcomer to this list

I just received a new sd card

a SanDisk SDSDQ-8192-E11M, shown as supported in 
http://wiki.openmoko.org/wiki/Supported_microSD_cards


following these instructions : 
http://wiki.openmoko.org/wiki/Booting_from_SD#Partioning_the_SD_card
I managed to fdisk it
create both partitions
format both partitions
and mount them
I then rebooted the FR and it crashed in kernel panic

I rebooted on the flash

but now :
root@om-gta02:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0

dmesg shows :


[  171.295000] glamo-mci glamo-mci.0: Error after cmd: 0x8121
[  171.295000] mmcblk0: error -110 sending read/write command
[  171.300000] end_request: I/O error, dev mmcblk0, sector 0
[  171.300000] Buffer I/O error on device mmcblk0, logical block 0
[  171.305000] glamo-mci glamo-mci.0: Error after cmd: 0x21
[  171.305000] glamo-mci glamo-mci.0: Error after cmd: 0x121
[  171.315000] mmcblk0: error -110 sending read/write command
[  171.320000] end_request: I/O error, dev mmcblk0, sector 8
[  171.320000] Buffer I/O error on device mmcblk0, logical block 1
[  171.330000] glamo-mci glamo-mci.0: Error after cmd: 0x8021
[  171.330000] glamo-mci glamo-mci.0: Error after cmd: 0x8123
[  171.335000] mmcblk0: error -84 sending read/write command
[  171.340000] end_request: I/O error, dev mmcblk0, sector 16
[  171.340000] Buffer I/O error on device mmcblk0, logical block 2
[  171.355000] glamo-mci glamo-mci.0: Error after cmd: 0x21
[  171.355000] mmcblk0: error -110 sending read/write command
[  171.360000] end_request: I/O error, dev mmcblk0, sector 24
[  171.360000] Buffer I/O error on device mmcblk0, logical block 3
[  171.375000] glamo-mci glamo-mci.0: Error after cmd: 0x8021
[  171.375000] mmcblk0: error -110 sending read/write command
[  171.380000] end_request: I/O error, dev mmcblk0, sector 0
[  171.380000] Buffer I/O error on device mmcblk0, logical block 0

any help to put my hand back on the card is greatly appreciated
I don't mind to loose every data on it

thanks
Nicolas