I assume you mean Qtopia 4.3.3...

However I've had the same problem. With the "Speaker Playback Volume" at
100 (that's default, and 79% of maximum) the volume is incredibly low,
low as in the person you're speaking to is indiscernible unless you're
in a perfectly quiet room and listening very carefully.

After setting the "Speaker Playback Volume" to 127 (100% of maximum) the
volume is acceptable for a quiet room but would be insufficient for even
a moderately noisy environment. The legendary buzz also increases to a
level just as loud as the voice itself. 2 questions:

1) Why is the default volume so god-awful low on Qtopia? And why, even
on maximum (although I realise the theoretical maximum might hinge on a
number of settings), is it still so low?

2) Is there *any* way to get rid of the GSM buzz permanently? I have
seen the whole 'PIN 4' explanation on the wiki, however basically what
that's saying is that it's a hardware fault which is unlikely to have a
viable resolution. I am at the point now where I would seriously
consider removing the audio jack completely if I knew it would get rid
of the buzz. Would this work?

Aaron

On Fri, 2008-09-05 at 00:16 -0700, yochaigal wrote:
quoted text
> sorry, it seems a fix was here all along:
> 
> http://n2.nabble.com/qtopia-update-tp832851p835065.html
> --------------------------------------------------------------
> 
> I was able to fix this by tweaking the 'Speaker Playback Volume' in
> /usr/share/openmoko/scenarios/gsmhandset.state. Updated this value to 127
> (was set to 100) and the volume is back to normal for me.
> 
>     control.4 {
>         comment.access 'read write'
>         comment.type INTEGER
>         comment.count 2
>         comment.range '0 - 127'
>         iface MIXER
>         name 'Speaker Playback Volume'
>         value.0 127
>         value.1 127
>     }
> 
> 
> --Andrew 
> 
> -------------
> thanks!
> 
> 
> 
> 
> yochaigal wrote:
> > 
> > Just flashed the newest qtopia to a 1gb sd card... any ideas as to why the
> > volume is super low, no matter what I set it to in the control panel?
> > 
> > thanks
> > 
> 

_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community