Hi there,
It looks like my problem with SIM registration [1] may be easily
solvable simply by trying a different SIM or reseating the current one.
But because I'm fetishistic about following battery charging
instructions I don't want to try this (which requires removing the
battery) until the unit is fully charged.
The wiki [2] says:
The battery can be charged using the provided charger (at 1000mA)
or from a powered USB port capable of providing 500mA worth of
current. Most computers will be able to charge the FreeRunner without
any problems.
Charging at 100mA takes 6-12 hours and at 500mA takes 1-2 hour
I understood the provided charger was a dumb one and that - because
the Freerunner is unable to communicate with it - an unpowered USB
connection would be assumed, the Freerunner would act conservatively,
only drawing 100mA.
Which is correct, please?
I decided to try forcing the Freerunner to fast-charge, and a little
Googling found me the CheckFastCharge-script on the Wiki [3].
Reading checkFastCharge.py I find that it checks '/sys/devices/
platform/s3c2410-i2c/i2c-adapter/i2c-0/0-0008/chgmode' and that fast
charging is indicated by "fast_cccv" there.
Presumably this script was written for the Neo1973, however, or a
different kernel, as on my Freerunner the location is '/sys/devices/
platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/chgmode' and it
currently says "fast", not "fast_cccv" (or, for that matter, slow or
anything like that).
So is "fast" the correct syntax for the Freerunner's chgmode?
Has it somehow detected that the charger is capable of 500+ mA?
Or should I echo "fast_cccv" to that location?
What are the correct '/sys/devices/platform/s3c2440-i2c/i2c-adapter/
i2c-0/0-0073/chgmode' values for "slow" and no-charge for the
Freerunner, please? (using the default factory image)
Or is chgmode simply broken on the Freerunner's default factory image?
TIA for any suggestions,
Stroller.
[1] http://lists.openmoko.org/pipermail/community/2008-July/021677.html
[2] http://wiki.openmoko.org/wiki/
Getting_Started_with_your_Neo_FreeRunner#Charging_the_Neo_Freerunner
[3] http://wiki.openmoko.org/wiki/CheckFastCharge-script
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
