> I have not tried over IPoIB, but opensm is running
>
> /home/zulfi > sminfo
> sminfo: sm lid 1 sm guid 0x11750000ffdaf4, activity count 16220
> priority 0 state 3 SMINFO_MASTER
>
> I also tried a few iband utilities and they all work fine. Not able to
> run any socket apps over SDP.
>
> Thanks
> Zulfi
>
> On 9/27/07, *Jim Mott* <jimmott@austin.rr.com
> <mailto:jimmott@austin.rr.com>> wrote:
>
> Were you able to connect IPoIB between the nodes? Are you sure
> opensm was running? I am ashamed to admit that occasionally I
> forget to start opensm and wonder why SDP does not connect.
>
>
>
> *From:*
general-bounces@lists.openfabrics.org
> <mailto:general-bounces@lists.openfabrics.org> [mailto:
>
general-bounces@lists.openfabrics.org
> <mailto:general-bounces@lists.openfabrics.org>] *On Behalf Of
> *Zulfi Imani
> *Sent:* Thursday, September 27, 2007 3:22 PM
> *To:*
general@lists.openfabrics.org
> <mailto:general@lists.openfabrics.org>
> *Subject:* [ofa-general] Problem running SDP apps using OFED 1.2
>
>
>
> Hi,
>
> I installed the OFED1.2 stack and am trying to run a simple socket
> server and client over the SDP stack. The Infiniband hardware is
> QLogic.
>
> First I set the ENV vars
> export LD_PRELOAD=/root/zulfi/iband/INSTALL/lib64/libsdp.so
>
> export LIBSDP_CONFIG_FILE=/home/zulfi/libsdp.conf
>
>
> The SDP config file has:
> *use sdp server * *:*
> use sdp client * *:*
> *
> Then started the socket server and did a 'sdpnetstat -San' and
> found that it listed the SDP port on which the server was listening.
>
> On the client machine too I did the same; exported the variables,
> setup the SDP config file and on running the client './client
> port# server_machine' it gave me a "network not reachable" error.
>
> I tried to get some information about the error on the net but
> could not find any.
>
> I then checked the /proc/<pid>/maps file and found that libsdp.so
> was being loaded.
> also:
> /root > lsmod | grep sdp
> ib_sdp 120224 3
>
> Does QLogic support SDP applications ? Or am I missing something
> in the SDP config file or do I need to make changes to my code ?
>
> Any information on this will be a big help.
>
> Thanks,
> Zulfi
>
>
>
>
>
>
> --
> Regs,
> Zulfi
> ------------------------------------------------------------------------
>
> _______________________________________________
> general mailing list
>
general@lists.openfabrics.org
>
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>
> To unsubscribe, please visit
http://openib.org/mailman/listinfo/openib-general
