Bad AML. Looks like it is trying to do an AML Load of a memory block, and that
is failing.
Usually that's because the checksum is incorrect.  Look at dsdt.c:aml_load()
and put printf's at both goto fails', to see what is failing.

Not much I can do about it now as I am in Palau. :)

-jordan

quoted text
> Date: Wed, 22 Dec 2010 18:04:06 -0600
> From: slash@peereboom.us
> To: kwesterback@rogers.com
> CC: tech@openbsd.org; jordan@openbsd.org; mlarkin@openbsd.org;
marco@openbsd.org; kettenis@openbsd.org
quoted text
> Subject: Re: New acpi challenges! New Dell XPS blows up in acpivideo!
>
> don't forget to send the amldump
>
> On Wed, Dec 22, 2010 at 04:08:54PM -0500, Kenneth R Westerback wrote:
> > Got a new Dell XPS 401 laptop today and booted amd64 -current bsd.mp
> > off of a usb stick. It immediately blew up in acpi. bsd.rd did not
> > blow up.
> >
> > There seems to be a minor (i.e. non ddb> causing) issue prior to
> > acpivideo:
> >
> > acpiec0 at acpi0
> > acpicpu0 at acpi0acpi0: unable to load \_PR_.CSDT
> > : PSS
> > acpicpu1 at acpi0: PSS
> >
> >
> > Hand transcribed:
> >
> > <usual dmesg -- see below>
> > acpivideo at acpi0: GFX0
> > 	0xffff8000001d6788 cnt:01 stk: 00 objref: 0xffff8000001c3c08
> > 	index: 0 opcode: Cond Ref
> > [\HDOS] 0xffff8000001c3c08 cnt: 04 stk: 00 method: 08
> > Could not convert 101 to 1
> > 6a58 Called: \_SB_.PCI0.GFX0._DOS
> > 	arg0: 0xffff8000001d1a08 cnt: 01 stk: 00 integer: 4
> > 6a5c Called: \_SB_.PCI0.GFX0._DOS
> > 	arg0: 0xffff8000001d1a08 cnt: 01 stk: 00 integer: 4
> > panic: aml_die aml_xconvert:2052
> >
> > ddb{0}> trace
> > _aml_die
> > aml_xconvert
> > aml_xstore
> > aml_xparse
> > aml_xeval
> > aml_evalnode
> > acpivideo_set_policy
> > acpivideo_attach
> > config_attach
> > acpi_foundvideo
> > aml_found_node
> > aml_found_node
> > aml_found_node
> > aml_found_node
> > aml_found_node
> > acpi_attach
> > config_attach
> > bios_attach
> > config_attach
> > mainbus_attach
> > config_attach
> > cpu_configure
> > main
> >
> > Disabling acpivideo via ukc makes bsd.mp boot.
> >
> > tar of acpidump files attached.
> >
> > Note that the NVidia 425M is only recognized because I added that
> > to pcidevs.
> >
> > .... Ken
> >
> > OpenBSD 4.8-current (GENERIC.MP) #3: Wed Dec 22 12:37:54 EST 2010
> >     root@tbay.westerback.ca:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 3151962112 (3005MB)
> > avail mem = 3054088192 (2912MB)
> > User Kernel Config
> > UKC> disable acpivido\^H \^Hep\^H \^Ho
> > 351 acpivideo* disabled
> > UKC> quit
> > Continuing...
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb6d0 (56 entries)
> > bios0: vendor Dell Inc. version "A04" date 10/15/2010
> > bios0: Dell Inc. XPS L401X
> > acpi0 at bios0: rev 3
> > acpi0: sleep states S0 S1 S3 S4 S5
> > acpi0: tables DSDT FACP APIC SSDT MCFG SLIC HPET OSFR SSDT
> > acpi0: wakeup devices P0P1(S3) P0P2(S3) P0P3(S3) P0P4(S3) P0P5(S3)
BR20(S3) EUSB(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USBE(S4) USB4(S3)
USB5(S3) USB6(S3) PEX0(S3) PEX1(S3) PEX2(S3) PEX3(S3) PEX4(S3) PEX5(S3)
PEX6(S3) PEX7(S3) SLPB(S0) LID0(S3)
quoted text
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM) i7 CPU Q 840 @ 1.87GHz, 1862.26 MHz
> > cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S
SSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
quoted text
> > cpu0: 256KB 64b/line 8-way L2 cache
> > cpu0: apic clock running at 132MHz
> > cpu1 at mainbus0: apid 2 (application processor)
> > cpu1: Intel(R) Core(TM) i7 CPU Q 840 @ 1.87GHz, 1861.99 MHz
> > cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S
SSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
quoted text
> > cpu1: 256KB 64b/line 8-way L2 cache
> > cpu2 at mainbus0: apid 4 (application processor)
> > cpu2: Intel(R) Core(TM) i7 CPU Q 840 @ 1.87GHz, 1861.99 MHz
> > cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S
SSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
quoted text
> > cpu2: 256KB 64b/line 8-way L2 cache
> > cpu3 at mainbus0: apid 6 (application processor)
> > cpu3: Intel(R) Core(TM) i7 CPU Q 840 @ 1.87GHz, 1861.99 MHz
> > cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S
SSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
quoted text
> > cpu3: 256KB 64b/line 8-way L2 cache
> > cpu4 at mainbus0: apid 1 (application processor)
> > cpu4: Intel(R) Core(TM) i7 CPU Q 840 @ 1.87GHz, 1861.99 MHz
> > cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S
SSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
quoted text
> > cpu4: 256KB 64b/line 8-way L2 cache
> > cpu5 at mainbus0: apid 3 (application processor)
> > cpu5: Intel(R) Core(TM) i7 CPU Q 840 @ 1.87GHz, 1861.99 MHz
> > cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S
SSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
quoted text
> > cpu5: 256KB 64b/line 8-way L2 cache
> > cpu6 at mainbus0: apid 5 (application processor)
> > cpu6: Intel(R) Core(TM) i7 CPU Q 840 @ 1.87GHz, 1861.99 MHz
> > cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S
SSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
quoted text
> > cpu6: 256KB 64b/line 8-way L2 cache
> > cpu7 at mainbus0: apid 7 (application processor)
> > cpu7: Intel(R) Core(TM) i7 CPU Q 840 @ 1.87GHz, 1861.99 MHz
> > cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S
SSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
quoted text
> > cpu7: 256KB 64b/line 8-way L2 cache
> > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (P0P1)
> > acpiprt2 at acpi0: bus 2 (P0P2)
> > acpiprt3 at acpi0: bus 32 (BR20)
> > acpiprt4 at acpi0: bus 17 (PEX0)
> > acpiprt5 at acpi0: bus 18 (PEX1)
> > acpiprt6 at acpi0: bus -1 (PEX2)
> > acpiprt7 at acpi0: bus 20 (PEX3)
> > acpiprt8 at acpi0: bus -1 (PEX4)
> > acpiprt9 at acpi0: bus 22 (PEX5)
> > acpiprt10 at acpi0: bus -1 (PEX6)
> > acpiprt11 at acpi0: bus -1 (PEX7)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0acpi0: unable to load \_PR_.CSDT
> > : PSS
> > acpicpu1 at acpi0: PSS
> > acpicpu2 at acpi0: PSS
> > acpicpu3 at acpi0: PSS
> > acpicpu4 at acpi0: PSS
> > acpicpu5 at acpi0: PSS
> > acpicpu6 at acpi0: PSS
> > acpicpu7 at acpi0: PSS
> > acpibtn0 at acpi0: SLPB
> > acpibtn1 at acpi0: PWRB
> > acpiac0 at acpi0: AC unit online
> > acpibat0 at acpi0: BAT1 model "Dell" serial 906 type LION oem "SANYO"
> > acpibtn2 at acpi0: LID0
> > acpivideo at acpi0 not configured
> > cpu0: Enhanced SpeedStep 1861 MHz: speeds: 1863, 1862, 1729, 1596, 1463,
1330, 1197 MHz
quoted text
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0xd132 rev
0x11
quoted text
> > ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11
> > pci1 at ppb0 bus 2
> > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 425M" rev 0xa1
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product 0x0bea
rev 0xa1: apic 0 int 17 (irq 10)
quoted text
> > azalia0: no supported codecs
> > azalia0: initialization failure, detaching
> > "Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
> > "Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
> > "Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
> > "Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
> > "Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
> > "Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not
configured
quoted text
> > "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
> > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 0 int 16
(irq 11)
quoted text
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia1 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic 0
int 22 (irq 5)
quoted text
> > azalia1: codecs: Realtek/0x0665
> > audio0 at azalia1
> > ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 0 int 17
(irq 10)
quoted text
> > pci2 at ppb1 bus 17
> > ppb2 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x06: apic 0 int 16
(irq 11)
quoted text
> > pci3 at ppb2 bus 18
> > iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: apic 0 int
17 (irq 10), MIMO 1T2R, BGS, address 00:26:c7:dd:de:c6
quoted text
> > ppb3 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: apic 0 int 19
(irq 3)
quoted text
> > pci4 at ppb3 bus 20
> > vendor "JMicron", unknown product 0x2392 (class system subclass
miscellaneous, rev 0x30) at pci4 dev 0 function 0 not configured
quoted text
> > sdhc0 at pci4 dev 0 function 2 vendor "JMicron", unknown product 0x2391
rev 0x30: apic 0 int 19 (irq 3)
quoted text
> > sdmmc0 at sdhc0
> > vendor "JMicron", unknown product 0x2393 (class system subclass
miscellaneous, rev 0x30) at pci4 dev 0 function 3 not configured
quoted text
> > vendor "JMicron", unknown product 0x2394 (class system subclass
miscellaneous, rev 0x30) at pci4 dev 0 function 4 not configured
quoted text
> > ppb4 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 0 int 16
(irq 11)
quoted text
> > pci5 at ppb4 bus 22
> > re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), apic 0 int 17 (irq 10), address b8:ac:6f:c5:47:dc
quoted text
> > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
> > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 0 int 23
(irq 7)
quoted text
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
> > pci6 at ppb5 bus 32
> > pcib0 at pci0 dev 31 function 0 "Intel HM57 LPC" rev 0x06
> > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: apic 0 int 19
(irq 3), AHCI 1.3
quoted text
> > scsibus0 at ahci0: 32 targets
> > sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000BEKT-7, 01.0> SCSI3 0/direct
fixed
quoted text
> > sd0: 476940MB, 512 bytes/sec, 976773168 sec total
> > cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, DVD+-RW TS-U633J, D200> ATAPI
5/cdrom removable
quoted text
> > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 0 int
18 (irq 4)
quoted text
> > iic0 at ichiic0
> > lisa0 at iic0 addr 0x1d: lis331dl
> > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > mtrr: Pentium Pro MTRR support
> > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> > uvideo0 at uhub2 port 4 configuration 1 interface 0
"CN0NX8GR786640C10264A00 Laptop_Integrated_Webcam_2HDM" rev 2.00/9.01 addr 3
quoted text
> > video0 at uvideo0
> > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> > umass0 at uhub3 port 3 configuration 1 interface 0 "Sony Storage Media"
rev 2.00/1.00 addr 3
quoted text
> > umass0: using SCSI over Bulk-Only
> > scsibus1 at umass0: 2 targets, initiator 0
> > sd1 at scsibus1 targ 1 lun 0: <Sony, Storage Media, 0100> SCSI0 0/direct
removable
quoted text
> > sd1: 3824MB, 512 bytes/sec, 7831552 sec total
> > uplcom0 at uhub3 port 4 "Prolific Technology Inc. USB-Serial Controller"
rev 1.10/3.00 addr 4
quoted text
> > ucom0 at uplcom0
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > root on sd1a swap on sd1b dump on sd1b
> >
> > [demime 1.01d removed an attachment of type application/x-tar-gz]