>
jsg@goblin.cx (Jonathan Gray), 2010.11.29 (Mon) 23:20 (CET):
> > On Mon, Nov 29, 2010 at 05:25:38PM +0100, MERIGHI Marcus wrote:
> > > disclaimer: David Coppa told me to post this to tech@ so this is not a
> > > case of cross posting.
> > >
> > > bought a ZTE MF112 today for my girlfriends ms win notebook. Took the
> > > chance to test it on OpenBSD.
> > > Without the patches below the thingy attaches as umsm for a second,
> > > detaches and re-attaches as umass.
> > > After patching it attaches as umsm0, umsm1, umsm2, umsm3 and ucom0,
> > > ucom1, ucom2.
> > does it come back as the same id? the other ZTE devices apparently
> > come back differently.
>
> since I'm not sure what your question is aiming at I did the attach
> and patch dance once more and saved "usbdevs -v":
>
> on a snapshot of today, ergo before patching:
> first:
> umsm0 attach
> port 2 addr 2: full speed, power 500 mA, config 1,
> ZTE WCDMA Technologies MSM(0x2000), ZTE,Incorporated(0x19d2),
> rev 0.00, iSerialNumber P671A2ZTED010000
> umsm0 detach
> umass0 attach:
> port 2 addr 2: full speed, power 500 mA, config 1,
> ZTE WCDMA Technologies MSM(0x0117), ZTE,Incorporated(0x19d2),
> rev 0.00, iSerialNumber P671A2ZTED010000
>
> after updating src to -current today and patching:
> umsm0 attach
> port 2 addr 2: full speed, power 500 mA, config 1,
> ZTE WCDMA Technologies MSM(0x2000), ZTE,Incorporated(0x19d2),
> rev 0.00, iSerialNumber P671A2ZTED010000
> umsm0 detach
> umsm0 attach
> port 2 addr 2: full speed, power 500 mA, config 1,
> ZTE WCDMA Technologies MSM(0x0117), ZTE,Incorporated(0x19d2), rev 0.00,
> iSerialNumber P671A2ZTED010000
> ucom0 attach
> umsm1 attach
> ucom1 attach
> umsm2 attach
> ucom2 attach
> umsm3 attach