quoted text > Howdy,
>
> I know that the website states dmesgs for systems running bsd.mp would be
> appreciated. This is my dmesg from a dell t105, the onboard network card is
> turned off, I'm getting kernel panics with it on, so I'm currently working
> that issue. Here's my dmesg:
>
> -bash-3.2$ dmesg
>
> OpenBSD 4.2 (GENERIC.MP) #1378: Tue Aug 28 10:48:58 MDT 2007
>
> deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>
> real mem = 535351296 (510MB)
>
> avail mem = 508305408 (484MB)
>
> mainbus0 at root
>
> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0cd0 (47 entries)
>
> bios0: vendor Dell Inc. version "1.0.1" date 09/17/2007
>
> bios0: Dell Inc. PowerEdge T105
>
> acpi at mainbus0 not configured
>
> mainbus0: Intel MP Specification (Version 1.4)
>
> cpu0 at mainbus0: apid 0 (boot processor)
>
> cpu0: Dual-Core AMD Opteron(tm) Processor 1210, 1808.54 MHz
>
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
> SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
>
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
> 16-way L2 cache
>
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
>
> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
>
> cpu0: apic clock running at 200MHz
>
> cpu1 at mainbus0: apid 1 (application processor)
>
> cpu1: Dual-Core AMD Opteron(tm) Processor 1210, 1808.34 MHz
>
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
> SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
>
> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
> 16-way L2 cache
>
> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
>
> cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
>
> mpbios: bus 0 is type PCI
>
> mpbios: bus 1 is type PCI
>
> mpbios: bus 2 is type ISA
>
> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins
>
> pci0 at mainbus0 bus 0: configuration mode 1
>
> "NVIDIA nForce4 DDR" rev 0xa4 at pci0 dev 0 function 0 not configured
>
> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xf1
>
> nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
>
> iic0 at nviic0
>
> iic1 at nviic0
>
> ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 11
> (irq 11), version 1.0, legacy support
>
> ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa4: apic 2 int 10
> (irq 10)
>
> usb0 at ehci0: USB revision 2.0
>
> uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
>
> pciide0 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
>
> pciide0: using apic 2 int 10 (irq 10) for native-PCI interrupt
>
> wd0 at pciide0 channel 0 drive 0: <WDC WD800AAJS-18TDA1>
>
> wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
>
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>
> pciide1 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
>
> pciide1: using apic 2 int 11 (irq 11) for native-PCI interrupt
>
> atapiscsi0 at pciide1 channel 0 drive 0
>
> scsibus0 at atapiscsi0: 2 targets
>
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDRH20N, 0D04> SCSI0
> 5/cdrom removable
>
> cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
>
> ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xf2
>
> pci1 at ppb0 bus 1
>
> xl0 at pci1 dev 7 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: apic 2 int
> 12 (irq 12), address 00:50:da:1a:af:c8
>
> bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 4
>
> vga1 at pci1 dev 8 function 0 "ATI ES1000" rev 0x02
>
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>
> ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
>
> pci2 at ppb1 bus 2
>
> ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
>
> pci3 at ppb2 bus 3
>
> ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
>
> pci4 at ppb3 bus 4
>
> ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
>
> pci5 at ppb4 bus 5
>
> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
>
> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
>
> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
>
> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
>
> isa0 at pcib0
>
> isadma0 at isa0
>
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>
> pckbc0 at isa0 port 0x60/5
>
> pckbd0 at pckbc0 (kbd slot)
>
> pckbc0: using irq 1 for kbd slot
>
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>
> pcppi0 at isa0 port 0x61
>
> midi0 at pcppi0: <PC speaker>
>
> spkr0 at pcppi0
>
> usb1 at ohci0: USB revision 1.0
>
> uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
>
> uhidev0 at uhub1 port 7 configuration 1 interface 0
>
> uhidev0: Cherry Mikroschalter Das Keyboard, rev 2.00/0.26, addr 2, iclass
> 3/1
>
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
>
> wskbd1 at ukbd0 mux 1
>
> wskbd1: connecting to wsdisplay0
>
> dkcsum: wd0 matches BIOS drive 0x80
>
> root on wd0a swap on wd0b dump on wd0b
>
>
>
> -Jonathan Lindsey
>
> Network Engineer
>
> 3D Research Corporation
>
> [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
