Howdy,
I know that the website states dmesgs for systems running bsd.mp would be
appreciated. This is my dmesg from a dell t105, the onboard network card is
turned off, I'm getting kernel panics with it on, so I'm currently working
that issue. Here's my dmesg:
-bash-3.2$ dmesg
OpenBSD 4.2 (GENERIC.MP) #1378: Tue Aug 28 10:48:58 MDT 2007
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 535351296 (510MB)
avail mem = 508305408 (484MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0cd0 (47 entries)
bios0: vendor Dell Inc. version "1.0.1" date 09/17/2007
bios0: Dell Inc. PowerEdge T105
acpi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 1210, 1808.54 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 1210, 1808.34 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa4 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xf1
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 11
(irq 11), version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa4: apic 2 int 10
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide0: using apic 2 int 10 (irq 10) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD800AAJS-18TDA1>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using apic 2 int 11 (irq 11) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDRH20N, 0D04> SCSI0
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xf2
pci1 at ppb0 bus 1
xl0 at pci1 dev 7 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: apic 2 int
12 (irq 12), address 00:50:da:1a:af:c8
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 4
vga1 at pci1 dev 8 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhidev0 at uhub1 port 7 configuration 1 interface 0
uhidev0: Cherry Mikroschalter Das Keyboard, rev 2.00/0.26, addr 2, iclass
3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
-Jonathan Lindsey
Network Engineer
3D Research Corporation
[demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
| Dmitry Torokhov | 2.6.27-rc8+ - first impressions |
| Linus Torvalds | Linux 2.6.27-rc8 |
| Nick Piggin | [patch 3/6] mm: fix fault vs invalidate race for linear mappings |
| Alan Cox | [PATCH 00/76] Queued TTY Patches |
git: | |
| Petr Baudis | [FYI][PATCH] Customizing the WinGit installer |
| Pierre Habouzit | Re: git push (mis ?)behavior |
| Mark Levedahl | Allowing override of the default "origin" nickname |
| Junio C Hamano | [PATCH] Detached HEAD (experimental) |
| Richard Stallman | Real men don't attack straw men |
| Luca Dell'Oca | Authenticate squid in Active Directory |
| Leon Dippenaar | New tcp stack attack |
| Nuno Magalhães | Can't scp, ssh is slow to authenticate. |
| David Miller | Re: [PATCH] pkt_sched: Destroy gen estimators under rtnl_lock(). |
| KOSAKI Motohiro | [bug?] tg3: Failed to load firmware "tigon/tg3_tso.bin" |
| Andi Kleen | Re: [PATCH] Disable TSO for non standard qdiscs |
| Alexey Dobriyan | [PATCH 01/33] nf_conntrack_sip: de-static helper pointers |
