Re: Slow disk IO HP DL120 G5 with LSI1068E

view
thread

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

From: Evgeniy Sudyr

Subject: Re: Slow disk IO HP DL120 G5 with LSI1068E

Date: Tuesday, August 31, 2010 - 11:35 am

Did it, but looks something wrong:

1. scsi -f /dev/rsd0c -m 8 -P 3 -e
2. Opened vi where I edited WCE: 0 to 1 and and saved file
3. Message appears:

/var/tmp/scrvzvir1o: 2 lines, 16 characters.
SCIOCCOMMAND ioctl: Command accepted.
return status 3 (Sense Returned) host adapter status 2
Command out (6 of 6):
15 01 00 00 18 00

Data out (0 of 24):

Error code is "current errors"
Segment number is 00
Sense key is "Illegal request"
The Information field is not valid but contains 00000000 (0).
The Command Specific Information field is 00000000 (0).
Additional sense code: 24
Additional sense code qualifier: 00
sense (32 of 48):
70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00



On Tue, Aug 31, 2010 at 9:24 PM, Marco Peereboom <slash@peereboom.us> wrote:
quoted text> Something like:
>
> # scsi -f /dev/rsd0c -m 8
>
> change WCE: 0 to WCE: 1
>
> On Tue, Aug 31, 2010 at 08:20:18PM +0300, Evgeniy Sudyr wrote:
>> Marco,
>>
>> thank you for your super fast answer!
>>
>> As I understood you told that I need to delete raid logical disk, and
>> use two separate disks.
>>
>> I did it and I'm installing OpenBSD on first disk right now.
>>
>> I have question for you - how should I "enable write cache on them
>> using scsi" ?
>>
>> --
>> Thanks!
>>
>>
>>
>> On Tue, Aug 31, 2010 at 7:00 PM, Marco Peereboom <slash@peereboom.us>
wrote:
quoted text>> > Your disks have write cache disabled. B I started on a diff but hit a
>> > roadblock and didn't get back to figuring this out. B Currently the only
>> > way to "fix" this is to undo the raid volume and let the actual physical
>> > disks show up. B Then enable write cache on them using scsi. B Not
really
quoted text>> > something for the faint hearted. B At some point I'll go spend some time
>> > to figure this out but not anytime soon :-(
>> >
>> > On Tue, Aug 31, 2010 at 06:52:44PM +0300, Evgeniy Sudyr wrote:
>> >> I have troubles with on OpenBSD 4.7 with HP DL 120 G5
>> >>
>> >> Actually I'm trying to unpack src.tar.gz and see that it's very slow.
>> >>
>> >> There is my systat during unpacking and dmesg for the server
>> >>
>> >> B systat
>> >>
>> >> B B B 2 users B B B Load 2.77 2.48 2.17 B B B B B B B B B B B B B B B
B B B B B B Tue
quoted text>> Aug 31 19:46:02 2010
>> >>
>> >> B B B B B B B B B B B B memory totals (in KB) B B B B B B B B B B B
PAGING B B SWAPPING
quoted text>> B B B B Interrupts
>> >> B B B B B B B B B B B real B B virtual B B B B free B B B B B B B B B
B in B out B B in
quoted text>> B out B B B B B 568 total
>> >> Active B B B 13212 B B B B 13212 B 3281736 B B ops B B B B B B B B B B B
B B B B B B
quoted text>> B B B B B B B B B 400 clock
>> >> All B B B B B 410024 B B B 410024 B 7342468 B B pages B B B B B B B B B
B B B B B B
quoted text>> B B B B B B B B B B 79 ipi
>> >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B
quoted text>> B B B B B B B B B B B B B B B B B B B 88 mpi0
>> >> Proc:r B d B s B w B B B Csw B B Trp B B Sys B B Int B B Sof B Flt B B B
B B
quoted text>> forks B B B B B B 1 em0
>> >> B B B B B B B B 2 B 6 B B B B B B 164 B B B B 1 B B 258 B B B 89 B B 100
B B B 9 B B B
quoted text>> B B fkppw B B B B B B B B uhci3
>> >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B
quoted text>> B B B B B B B B fksvm B B B B B B B B ehci1
>> >> B B B 0.0%Int B B 0.1%Sys B B 0.2%Usr B B 0.0%Nic B 99.7%Idle B B B B B
B pwait
quoted text>> >> | B B B | B B B | B B B | B B B | B B B | B B B | B B B | B B B | B B B
| B B B | B
quoted text>> B B B B relck
>> >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B
quoted text>> B B B B B B B B rlkok
>> >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B
quoted text>> B B B B B B B B noram
>> >> Namei B B B B B B B B Sys-cache B B B Proc-cache B B B No-cache B B B
B B B B
quoted text>> ndcpy
>> >> B B B B Calls B B B B hits B B B % B B B hits B B B B % B B B miss B B %
B B B B B B B
quoted text>> fltcp
>> >> B B B B B B 881 B B B B B 742 B B 84 B B B B B B 4 B B B B 0 B B B B 135
B 15 B B B B B
quoted text>> B B zfod
>> >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B
quoted text>> B B B B B B B B cow
>> >> Disks B B sd0 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B
quoted text>> 30764 fmin
>> >> seeks B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B
quoted text>> 41018 ftarg
>> >> xfers B B B 88 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B
quoted text>> B B B B B B itarg
>> >> speed B 761K B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B
quoted text>> B 49 wired
>> >> B B sec B B 1.0 B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B
quoted text>> B B B B B B pdfre
>> >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B
quoted text>> B B B B B B B B pdscn
>> >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B
quoted text>> B B B B B B B B pzidle
>> >> B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B
quoted text>> B B B B B 15 kmapent
>> >>
>> >> B dmesg
>> >>
>> >> OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010
>> >> B B B
B deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
quoted text>> >> real mem = 3889758208 (3709MB)
>> >> avail mem = 3780005888 (3604MB)
>> >> mainbus0 at root
>> >> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdc010 (43 entries)
>> >> bios0: vendor HP version "O22" date 10/09/2009
>> >> bios0: HP ProLiant DL120 G5
>> >> acpi0 at bios0: rev 2
>> >> acpi0: tables DSDT FACP SPMI EINJ HEST BERT SSDT ERST MCFG APIC BOOT
>> >> SPCR SSDT SSDT SSDT
>> >> acpi0: wakeup devices USB4(S3) USB5(S3) USB7(S3) ESB2(S4) EXP1(S4)
>> >> EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EXP6(S4) USB1(S3) USB2(S3)
>> >> USB3(S3) USB6(S3) ESB1(S3) PCIB(S3) PWRB(S3)
>> >> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> >> cpu0 at mainbus0: apid 0 (boot processor)
>> >> cpu0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.65 MHz
>> >> cpu0:
>>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
quoted text>>
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
quoted text>> xTPR,NXE,LONG
>> >> cpu0: 4MB 64b/line 16-way L2 cache
>> >> cpu0: apic clock running at 266MHz
>> >> cpu1 at mainbus0: apid 1 (application processor)
>> >> cpu1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
>> >> cpu1:
>>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
quoted text>>
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
quoted text>> xTPR,NXE,LONG
>> >> cpu1: 4MB 64b/line 16-way L2 cache
>> >> cpu2 at mainbus0: apid 2 (application processor)
>> >> cpu2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
>> >> cpu2:
>>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
quoted text>>
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
quoted text>> xTPR,NXE,LONG
>> >> cpu2: 4MB 64b/line 16-way L2 cache
>> >> cpu3 at mainbus0: apid 3 (application processor)
>> >> cpu3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
>> >> cpu3:
>>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
quoted text>>
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
quoted text>> xTPR,NXE,LONG
>> >> cpu3: 4MB 64b/line 16-way L2 cache
>> >> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
>> >> acpiprt0 at acpi0: bus 0 (PCI0)
>> >> acpiprt1 at acpi0: bus 1 (PEG1)
>> >> acpiprt2 at acpi0: bus -1 (PEG2)
>> >> acpiprt3 at acpi0: bus 5 (EXP1)
>> >> acpiprt4 at acpi0: bus -1 (EXP2)
>> >> acpiprt5 at acpi0: bus -1 (EXP3)
>> >> acpiprt6 at acpi0: bus -1 (EXP4)
>> >> acpiprt7 at acpi0: bus 13 (EXP5)
>> >> acpiprt8 at acpi0: bus 14 (EXP6)
>> >> acpiprt9 at acpi0: bus 17 (PCIB)
>> >> acpicpu0 at acpi0: C3, PSS
>> >> acpicpu1 at acpi0: C3, PSS
>> >> acpicpu2 at acpi0: C3, PSS
>> >> acpicpu3 at acpi0: C3, PSS
>> >> acpibtn0 at acpi0: PWRB
>> >> ipmi at mainbus0 not configured
>> >> cpu0: Enhanced SpeedStep 2133 MHz: speeds: 2133, 1600 MHz
>> >> pci0 at mainbus0 bus 0
>> >> pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x01
>> >> ppb0 at pci0 dev 1 function 0 "Intel 3200/3210 PCIE" rev 0x01: apic 4
>> >> int 16 (irq 5)
>> >> pci1 at ppb0 bus 1
>> >> mpi0 at pci1 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic
>> >> 4 int 16 (irq 5)
>> >> scsibus0 at mpi0: 112 targets
>> >> sd0 at scsibus0 targ 1 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2
>> >> 0/direct fixed
>> >> sd0: 237464MB, 512 bytes/sec, 486326272 sec total
>> >> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4
>> >> int 16 (irq 5)
>> >> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4
>> >> int 17 (irq 10)
>> >> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4
>> >> int 18 (irq 3)
>> >> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4
>> >> int 18 (irq 3)
>> >> usb0 at ehci0: USB revision 2.0
>> >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> >> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4
>> >> int 16 (irq 5)
>> >> pci2 at ppb1 bus 5
>> >> em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06:
>> >> apic 4 int 16 (irq 5), address 00:18:71:ec:02:9d
>> >> ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4
>> >> int 16 (irq 5)
>> >> pci3 at ppb2 bus 13
>> >> vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev
0x02
quoted text>> >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> >> ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4
>> >> int 17 (irq 10)
>> >> pci4 at ppb3 bus 14
>> >> bge0 at pci4 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0
>> >> (0xa200): apic 4 int 17 (irq 10), address 00:23:7d:aa:06:61
>> >> brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
>> >> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4
>> >> int 16 (irq 5)
>> >> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4
>> >> int 17 (irq 10)
>> >> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4
>> >> int 18 (irq 3)
>> >> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4
>> >> int 16 (irq 5)
>> >> usb1 at ehci1: USB revision 2.0
>> >> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> >> ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
>> >> pci5 at ppb4 bus 17
>> >> pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
>> >> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
>> >> channel 0 configured to native-PCI, channel 1 configured to native-PCI
>> >> pciide0: using apic 4 int 17 (irq 10) for native-PCI interrupt
>> >> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic
>> >> 4 int 17 (irq 10)
>> >> iic0 at ichiic0
>> >> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM ECC PC2-6400CL5
>> >> spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM ECC PC2-6400CL5
>> >> spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM ECC PC2-6400CL5
>> >> spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM ECC PC2-6400CL5
>> >> pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
>> >> channel 0 wired to native-PCI, channel 1 wired to native-PCI
>> >> pciide1: using apic 4 int 18 (irq 3) for native-PCI interrupt
>> >> usb2 at uhci0: USB revision 1.0
>> >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> usb3 at uhci1: USB revision 1.0
>> >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> usb4 at uhci2: USB revision 1.0
>> >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> usb5 at uhci3: USB revision 1.0
>> >> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> usb6 at uhci4: USB revision 1.0
>> >> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> usb7 at uhci5: USB revision 1.0
>> >> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> isa0 at pcib0
>> >> isadma0 at isa0
>> >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> >> pckbc0 at isa0 port 0x60/5
>> >> pcppi0 at isa0 port 0x61
>> >> midi0 at pcppi0: <PC speaker>
>> >> spkr0 at pcppi0
>> >> mtrr: Pentium Pro MTRR support
>> >> uhidev0 at uhub5 port 2 configuration 1 interface 0 "ServerEngines SE
>> >> USB Device" rev 1.10/0.01 addr 2
>> >> uhidev0: iclass 3/1
>> >> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
>> >> wskbd0 at ukbd0: console keyboard, using wsdisplay0
>> >> uhidev1 at uhub5 port 2 configuration 1 interface 1 "ServerEngines SE
>> >> USB Device" rev 1.10/0.01 addr 2
>> >> uhidev1: iclass 3/1
>> >> ums0 at uhidev1: 8 buttons, Z dir
>> >> wsmouse0 at ums0 mux 0
>> >> vscsi0 at root
>> >> scsibus1 at vscsi0: 256 targets
>> >> softraid0 at root
>> >> root on sd0a swap on sd0b dump on sd0b
>> >>
>> >>
>> >> # dd if=/dev/zero of=/tmp/tmp bs=1 count=10000000
>> >> 10000000+0 records in
>> >> 10000000+0 records out
>> >> 10000000 bytes transferred in 14.213 secs (703548 bytes/sec)
>> >>
>> >>
>> >> I tried to disable acpi, but that not helped. Results are same.
>> >>
>> >> This is about driver problems or something else ?
>> >>
>> >> --
>> >> With regards,
>> >> Eugene Sudyr
>> >>
>> >
>>
>>
>>
>> --
>> --
>> With regards,
>> Eugene Sudyr
>>
>



--
--
With regards,
Eugene Sudyr

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:

Slow disk IO HP DL120 G5 with LSI1068E, Evgeniy Sudyr, (Tue Aug 31, 8:52 am)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Marco Peereboom, (Tue Aug 31, 9:00 am)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Evgeniy Sudyr, (Tue Aug 31, 10:20 am)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Marco Peereboom, (Tue Aug 31, 11:24 am)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Ivan Nudzik, (Tue Aug 31, 11:30 am)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Evgeniy Sudyr, (Tue Aug 31, 11:35 am)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Marco Peereboom, (Tue Aug 31, 11:42 am)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Evgeniy Sudyr, (Tue Aug 31, 11:42 am)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Kenneth Gober, (Tue Aug 31, 12:15 pm)

Re: Slow disk IO HP DL120 G5 with LSI1068E, Stuart Henderson, (Tue Aug 31, 3:37 pm)

Re: Slow disk IO HP DL120 G5 with LSI1068E, David Gwynne, (Tue Aug 31, 8:31 pm)

Navigation

Popular discussions


linux-kernel:
Fortier,Vincent [Montreal]	2.6.21.5 june 30th to july 1st date hang?
Jeff Dike	[ PATCH 2/6 ] UML - Formatting fixes around os_{read_write}_file callers
Liam Girdwood	[PATCH 07/13] regulator: regulator test harness
Oleg Nesterov	Re: Getting the new RxRPC patches upstream
Stefan Seyfried	Re: 2.6.19-rc5: grub is much slower resuming from suspend-to-disk than in 2.6.18
linux-netdev:
Arnaud Ebalard	Re: [REGRESSION,BISECTED] MIPv6 support broken by f4f914b58019f0
Jan Engelhardt	Re: [PATCH iptables] extension: add xt_cpu match
Jarek Poplawski	Re: [PATCH] pkt_sched: Destroy gen estimators under rtnl_lock().
Sebastian Andrzej Siewior	[PATCH 8/8] net/emergency: remove locking from reycling pool if emergncy pools are...
David Miller	Re: [PATCH] qlcnic: dont assume NET_IP_ALIGN is 2
git:
Jakub Narebski	Re: git on MacOSX and files with decomposed utf-8 file names
Brandon Casey	Re: Thunderbird and patches (was Re: [PATCH v2] Enable setting attach as the def...
Christian Couder	[PATCH 1/3] rev-parse: add test script for "--verify"
Ramkumar Ramachandra	Re: [GSoC update] git-remote-svn: The final one
Junio C Hamano	Re: git-rm isn't the inverse action of git-add
openbsd-misc:
Joachim Schipper	Re: UVC Webcams
Florin Andrei	SOLVED [was: firewall is very slow, something's wrong]
Todd Alan Smith	Re: Microsoft gets the Most Secure Operating Systems award
Neal Hogan	Re: Need Advice: Thinkpad T60 or T61?
Sam Fourman Jr.	Re: Real men don't attack straw men
git-commits-head:
Linux Kernel Mailing List	ACPI: Disable ARB_DISABLE on platforms where it is not needed
Linux Kernel Mailing List	m68knommu: add read_barrier_depends() and irqs_disabled_flags()
Linux Kernel Mailing List	[MTD] Add mtd panic_write function pointer
Linux Kernel Mailing List	[ARM] pxa: remove duplicate select statements from Kconfig
Linux Kernel Mailing List	mlx4_core: Don't read reserved fields in mlx4_QUERY_ADAPTER()

Colocation donated by:

Syndicate