Marco,
thank you for your super fast answer!
As I understood you told that I need to delete raid logical disk, and
use two separate disks.
1. I deleted array and selected disk 1 to be boot disk in LSI configuration.
2. During installation I was able to see 2 disks (as expected), so I
installed OBSD on 1st drive.
3. After installation I tried to do the same unpack and figured that it's
"Then enable write cache on them using scsi" - how can I do this ?
Let me know if I can help with this issues testing on my hardware :) -
I would like to help you in this!
--
Thank you!
Evgeniy Sudyr
On Tue, Aug 31, 2010 at 7:00 PM, Marco Peereboom <slash@peereboom.us> wrote:
quoted text > Your disks have write cache disabled. B I started on a diff but hit a
> roadblock and didn't get back to figuring this out. B Currently the only
> way to "fix" this is to undo the raid volume and let the actual physical
> disks show up. B Then enable write cache on them using scsi. B Not really
> something for the faint hearted. B At some point I'll go spend some time
> to figure this out but not anytime soon :-(
>
> On Tue, Aug 31, 2010 at 06:52:44PM +0300, Evgeniy Sudyr wrote:
>> I have troubles with on OpenBSD 4.7 with HP DL 120 G5
>>
>> Actually I'm trying to unpack src.tar.gz and see that it's very slow.
>>
>> There is my systat during unpacking and dmesg for the server
>>
>> B systat
>>
>> B B 2 users B B Load 2.77 2.48 2.17 B B B B B B B B B B B Tue
Aug 31 19:46:02 2010
quoted text >>
>> B B B B B B memory totals (in KB) B B B B B B PAGING B SWAPPING
B B Interrupts
quoted text >> B B B B B B real B virtual B B free B B B B B in B out B in
B out B B B 568 total
quoted text >> Active B B 13212 B B 13212 B 3281736 B ops B B B B B B B B B
B B B B B 400 clock
quoted text >> All B B B 410024 B B 410024 B 7342468 B pages B B B B B B B B
B B B B B 79 ipi
quoted text >> B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B 88 mpi0
quoted text >> Proc:r B d B s B w B B Csw B Trp B Sys B Int B Sof B Flt B B B
forks B B B 1 em0
quoted text >> B B B B 2 B 6 B B B 164 B B 1 B 258 B B 89 B 100 B B 9 B B
B fkppw B B B B uhci3
quoted text >> B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B fksvm B B B B ehci1
quoted text >> B B 0.0%Int B 0.1%Sys B 0.2%Usr B 0.0%Nic B 99.7%Idle B B B pwait
>> | B B | B B | B B | B B | B B | B B | B B | B B | B B | B B | B
B B relck
quoted text >> B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B rlkok
quoted text >> B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B noram
quoted text >> Namei B B B B Sys-cache B B Proc-cache B B No-cache B B B B
ndcpy
quoted text >> B B Calls B B hits B B % B B hits B B % B B miss B % B B B B
fltcp
quoted text >> B B B 881 B B B 742 B 84 B B B 4 B B 0 B B 135 B 15 B B B
B zfod
quoted text >> B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B cow
quoted text >> Disks B sd0 B B B B B B B B B B B B B B B B B B B B
30764 fmin
quoted text >> seeks B B B B B B B B B B B B B B B B B B B B B B B
41018 ftarg
quoted text >> xfers B B 88 B B B B B B B B B B B B B B B B B B B B
B B B itarg
quoted text >> speed B 761K B B B B B B B B B B B B B B B B B B B B B
B 49 wired
quoted text >> B sec B 1.0 B B B B B B B B B B B B B B B B B B B B
B B B pdfre
quoted text >> B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B pdscn
quoted text >> B B B B B B B B B B B B B B B B B B B B B B B B B
B B B B pzidle
quoted text >> B B B B B B B B B B B B B B B B B B B B B B B B B
B B B 15 kmapent
quoted text >>
>> B dmesg
>>
>> OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010
>> B B deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 3889758208 (3709MB)
>> avail mem = 3780005888 (3604MB)
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdc010 (43 entries)
>> bios0: vendor HP version "O22" date 10/09/2009
>> bios0: HP ProLiant DL120 G5
>> acpi0 at bios0: rev 2
>> acpi0: tables DSDT FACP SPMI EINJ HEST BERT SSDT ERST MCFG APIC BOOT
>> SPCR SSDT SSDT SSDT
>> acpi0: wakeup devices USB4(S3) USB5(S3) USB7(S3) ESB2(S4) EXP1(S4)
>> EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EXP6(S4) USB1(S3) USB2(S3)
>> USB3(S3) USB6(S3) ESB1(S3) PCIB(S3) PWRB(S3)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.65 MHz
>> cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
quoted text >> cpu0: 4MB 64b/line 16-way L2 cache
>> cpu0: apic clock running at 266MHz
>> cpu1 at mainbus0: apid 1 (application processor)
>> cpu1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
>> cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
quoted text >> cpu1: 4MB 64b/line 16-way L2 cache
>> cpu2 at mainbus0: apid 2 (application processor)
>> cpu2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
>> cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
quoted text >> cpu2: 4MB 64b/line 16-way L2 cache
>> cpu3 at mainbus0: apid 3 (application processor)
>> cpu3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
>> cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
quoted text >> cpu3: 4MB 64b/line 16-way L2 cache
>> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 1 (PEG1)
>> acpiprt2 at acpi0: bus -1 (PEG2)
>> acpiprt3 at acpi0: bus 5 (EXP1)
>> acpiprt4 at acpi0: bus -1 (EXP2)
>> acpiprt5 at acpi0: bus -1 (EXP3)
>> acpiprt6 at acpi0: bus -1 (EXP4)
>> acpiprt7 at acpi0: bus 13 (EXP5)
>> acpiprt8 at acpi0: bus 14 (EXP6)
>> acpiprt9 at acpi0: bus 17 (PCIB)
>> acpicpu0 at acpi0: C3, PSS
>> acpicpu1 at acpi0: C3, PSS
>> acpicpu2 at acpi0: C3, PSS
>> acpicpu3 at acpi0: C3, PSS
>> acpibtn0 at acpi0: PWRB
>> ipmi at mainbus0 not configured
>> cpu0: Enhanced SpeedStep 2133 MHz: speeds: 2133, 1600 MHz
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x01
>> ppb0 at pci0 dev 1 function 0 "Intel 3200/3210 PCIE" rev 0x01: apic 4
>> int 16 (irq 5)
>> pci1 at ppb0 bus 1
>> mpi0 at pci1 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic
>> 4 int 16 (irq 5)
>> scsibus0 at mpi0: 112 targets
>> sd0 at scsibus0 targ 1 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2
>> 0/direct fixed
>> sd0: 237464MB, 512 bytes/sec, 486326272 sec total
>> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4
>> int 16 (irq 5)
>> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4
>> int 17 (irq 10)
>> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4
>> int 18 (irq 3)
>> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4
>> int 18 (irq 3)
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4
>> int 16 (irq 5)
>> pci2 at ppb1 bus 5
>> em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06:
>> apic 4 int 16 (irq 5), address 00:18:71:ec:02:9d
>> ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4
>> int 16 (irq 5)
>> pci3 at ppb2 bus 13
>> vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4
>> int 17 (irq 10)
>> pci4 at ppb3 bus 14
>> bge0 at pci4 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0
>> (0xa200): apic 4 int 17 (irq 10), address 00:23:7d:aa:06:61
>> brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
>> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4
>> int 16 (irq 5)
>> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4
>> int 17 (irq 10)
>> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4
>> int 18 (irq 3)
>> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4
>> int 16 (irq 5)
>> usb1 at ehci1: USB revision 2.0
>> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
>> pci5 at ppb4 bus 17
>> pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
>> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
>> channel 0 configured to native-PCI, channel 1 configured to native-PCI
>> pciide0: using apic 4 int 17 (irq 10) for native-PCI interrupt
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic
>> 4 int 17 (irq 10)
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM ECC PC2-6400CL5
>> spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM ECC PC2-6400CL5
>> spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM ECC PC2-6400CL5
>> spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM ECC PC2-6400CL5
>> pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
>> channel 0 wired to native-PCI, channel 1 wired to native-PCI
>> pciide1: using apic 4 int 18 (irq 3) for native-PCI interrupt
>> usb2 at uhci0: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at uhci1: USB revision 1.0
>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb4 at uhci2: USB revision 1.0
>> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb5 at uhci3: USB revision 1.0
>> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb6 at uhci4: USB revision 1.0
>> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb7 at uhci5: USB revision 1.0
>> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at pcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> spkr0 at pcppi0
>> mtrr: Pentium Pro MTRR support
>> uhidev0 at uhub5 port 2 configuration 1 interface 0 "ServerEngines SE
>> USB Device" rev 1.10/0.01 addr 2
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
>> wskbd0 at ukbd0: console keyboard, using wsdisplay0
>> uhidev1 at uhub5 port 2 configuration 1 interface 1 "ServerEngines SE
>> USB Device" rev 1.10/0.01 addr 2
>> uhidev1: iclass 3/1
>> ums0 at uhidev1: 8 buttons, Z dir
>> wsmouse0 at ums0 mux 0
>> vscsi0 at root
>> scsibus1 at vscsi0: 256 targets
>> softraid0 at root
>> root on sd0a swap on sd0b dump on sd0b
>>
>>
>> # dd if=/dev/zero of=/tmp/tmp bs=1 count=10000000
>> 10000000+0 records in
>> 10000000+0 records out
>> 10000000 bytes transferred in 14.213 secs (703548 bytes/sec)
>>
>>
>> I tried to disable acpi, but that not helped. Results are same.
>>
>> This is about driver problems or something else ?
>>
>> --
>> With regards,
>> Eugene Sudyr
>>
>
--
--
With regards,
Eugene Sudyr
