quoted text > I have troubles with on OpenBSD 4.7 with HP DL 120 G5
>
> Actually I'm trying to unpack src.tar.gz and see that it's very slow.
>
> There is my systat during unpacking and dmesg for the server
>
> systat
>
> 2 users Load 2.77 2.48 2.17 Tue Aug 31 19:46:02 2010
>
> memory totals (in KB) PAGING SWAPPING Interrupts
> real virtual free in out in out 568 total
> Active 13212 13212 3281736 ops 400 clock
> All 410024 410024 7342468 pages 79 ipi
> 88 mpi0
> Proc:r d s w Csw Trp Sys Int Sof Flt forks 1 em0
> 2 6 164 1 258 89 100 9 fkppw uhci3
> fksvm ehci1
> 0.0%Int 0.1%Sys 0.2%Usr 0.0%Nic 99.7%Idle pwait
> | | | | | | | | | | | relck
> rlkok
> noram
> Namei Sys-cache Proc-cache No-cache ndcpy
> Calls hits % hits % miss % fltcp
> 881 742 84 4 0 135 15 zfod
> cow
> Disks sd0 30764 fmin
> seeks 41018 ftarg
> xfers 88 itarg
> speed 761K 49 wired
> sec 1.0 pdfre
> pdscn
> pzidle
> 15 kmapent
>
> dmesg
>
> OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010
> deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 3889758208 (3709MB)
> avail mem = 3780005888 (3604MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdc010 (43 entries)
> bios0: vendor HP version "O22" date 10/09/2009
> bios0: HP ProLiant DL120 G5
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SPMI EINJ HEST BERT SSDT ERST MCFG APIC BOOT
> SPCR SSDT SSDT SSDT
> acpi0: wakeup devices USB4(S3) USB5(S3) USB7(S3) ESB2(S4) EXP1(S4)
> EXP2(S4) EXP3(S4) EXP4(S4) EXP5(S4) EXP6(S4) USB1(S3) USB2(S3)
> USB3(S3) USB6(S3) ESB1(S3) PCIB(S3) PWRB(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.65 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
> cpu0: 4MB 64b/line 16-way L2 cache
> cpu0: apic clock running at 266MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
> cpu1: 4MB 64b/line 16-way L2 cache
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
> cpu2: 4MB 64b/line 16-way L2 cache
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz, 2133.33 MHz
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
> cpu3: 4MB 64b/line 16-way L2 cache
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PEG1)
> acpiprt2 at acpi0: bus -1 (PEG2)
> acpiprt3 at acpi0: bus 5 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus -1 (EXP3)
> acpiprt6 at acpi0: bus -1 (EXP4)
> acpiprt7 at acpi0: bus 13 (EXP5)
> acpiprt8 at acpi0: bus 14 (EXP6)
> acpiprt9 at acpi0: bus 17 (PCIB)
> acpicpu0 at acpi0: C3, PSS
> acpicpu1 at acpi0: C3, PSS
> acpicpu2 at acpi0: C3, PSS
> acpicpu3 at acpi0: C3, PSS
> acpibtn0 at acpi0: PWRB
> ipmi at mainbus0 not configured
> cpu0: Enhanced SpeedStep 2133 MHz: speeds: 2133, 1600 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x01
> ppb0 at pci0 dev 1 function 0 "Intel 3200/3210 PCIE" rev 0x01: apic 4
> int 16 (irq 5)
> pci1 at ppb0 bus 1
> mpi0 at pci1 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic
> 4 int 16 (irq 5)
> scsibus0 at mpi0: 112 targets
> sd0 at scsibus0 targ 1 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2
> 0/direct fixed
> sd0: 237464MB, 512 bytes/sec, 486326272 sec total
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4
> int 16 (irq 5)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4
> int 17 (irq 10)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4
> int 18 (irq 3)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4
> int 18 (irq 3)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4
> int 16 (irq 5)
> pci2 at ppb1 bus 5
> em0 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06:
> apic 4 int 16 (irq 5), address 00:18:71:ec:02:9d
> ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4
> int 16 (irq 5)
> pci3 at ppb2 bus 13
> vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 4
> int 17 (irq 10)
> pci4 at ppb3 bus 14
> bge0 at pci4 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0
> (0xa200): apic 4 int 17 (irq 10), address 00:23:7d:aa:06:61
> brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4
> int 16 (irq 5)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4
> int 17 (irq 10)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4
> int 18 (irq 3)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4
> int 16 (irq 5)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> pci5 at ppb4 bus 17
> pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 4 int 17 (irq 10) for native-PCI interrupt
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic
> 4 int 17 (irq 10)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM ECC PC2-6400CL5
> spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM ECC PC2-6400CL5
> spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM ECC PC2-6400CL5
> spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM ECC PC2-6400CL5
> pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 4 int 18 (irq 3) for native-PCI interrupt
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub5 port 2 configuration 1 interface 0 "ServerEngines SE
> USB Device" rev 1.10/0.01 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub5 port 2 configuration 1 interface 1 "ServerEngines SE
> USB Device" rev 1.10/0.01 addr 2
> uhidev1: iclass 3/1
> ums0 at uhidev1: 8 buttons, Z dir
> wsmouse0 at ums0 mux 0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
>
>
> # dd if=/dev/zero of=/tmp/tmp bs=1 count=10000000
> 10000000+0 records in
> 10000000+0 records out
> 10000000 bytes transferred in 14.213 secs (703548 bytes/sec)
>
>
> I tried to disable acpi, but that not helped. Results are same.
>
> This is about driver problems or something else ?
>
> --
> With regards,
> Eugene Sudyr
