| Michael | high temp Acer Aspire 3000 and current
I've been trying to run OpenBSD on my laptop, but keep having high
temp problems. Perhaps related to the acpitz problem?
All I have done is login at console. Nothing else is running. sysctl
hw.sensors shows (fan is blowing high speed):
hw.sensors.acpitz0.temp0=56.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.kate0.temp2=67.00 degC
I installed FreeBSD 8.0 for comparison and to see how it works with my
broadcom 4318.
Output of sysctl -a |grep temperature ...
| Aug 2, 3:48 pm 2010 |
| analucia-abigail | Como ganhar uma eleição através do uso estratégico da in ...
DivulgaC'C#o para candidatos - EleiC'C5es 2010
Para vocC* que nC#o quer ser somente mais um candidato, mas sim um
candidato eleito, faC'a a diferenC'a! Chegou a sua oportunidade de
atingir milhares de eleitores com suas propostas. Custo baixo, ret orno
garantido!
Sem dC:vidas, todos nC3s vivenciamos e sabemos da evoluC'C#o crescente da
internet no processo polCtico. Isto C) fato consumado, a internet passou
de ferramenta quase exclusiva da elite nos anos 1990, ao segundo meio ...
| Aug 2, 3:28 pm 2010 |
| nixlists | Usb printer problem after upgrade
Hi.
I upgraded from a few months old -current snapshot to the August 1
i386 snapshot, and now any attempt to write to /dev/ulpt0 (my usb
printer) results in "Device busy." Booting with the old kernel - no
problem, I can print. Is this a bug in the new snapshot? Is anyone
else having issues with their USB printers with this snapshot?
Thanks.
ulpt0 at uhub0 port 2 configuration 1 interface 0 "Hewlett-Packard hp
LaserJet 2420" rev 2.00/1.00 addr 2
ulpt0: using bi-directional mode
| Aug 2, 3:12 pm 2010 |
| Mildreth Lara | El Nuevo Papel del Gerente Administrativo en las Empresa ...
El Nuevo Papel del Gerente Administrativo en las Empresas Modernas
Este magnmfico seminario le ofrece las herramientas, estrategias y
practicas administrativas que le ayudaran a identificar y solucionar
areas de oportunidad dentro de su compaqma de manera inmediata.
Actualmente las organizaciones viven en un entorno demasiado dinamico,
por lo que es necesario contar con informacisn oportuna y confiable para
tomar decisiones clave para el futuro de la empresa.
Algunos de los aspectos ...
| Aug 2, 2:48 pm 2010 |
| Lic. Álvaro Moreno | Como Resolver las Quejas de los Clientes
CC3mo Resolver las Quejas de los Clientes
SC3lo en MC)xico, D.F. 12 de agosto
Nada puede evitar el hecho que sus colaboradores se enfrenten a clientes
difCciles o enojados que provoquen situaciones conflictivas por no
recibir un trato o soluciC3n adecuada a sus demandas y un mal manejo
puede ser destructivo para su organizaciC3n...B!No lo permita!... Este
curso proporcionarC! a su personal un arsenal de tC)cnicas probadas para
manejar a sus clientes con estilo y tacto, ofreciendo en el ...
| Aug 2, 1:34 pm 2010 |
| Ðаниела ÐÐ¾Ñ ... | Уважаемые коллеги,
Sb`f`el{e jnkkech,
Qoexs qnnayhr| b`l, wrn opnd`~ oepb{i }r`f qbnecn dbsu }r`fmncn
dnl` m` As~j`m`u, b 50 lerp`u nr vemrp`k|mncn bund` b Demdp`phi (Anr`mhweqjhi
Q`d), b nrkhwmnl, sdnamnl bn bqeu nrmnxemhu on leqrnp`qonknfemh~ leqre.
Novhh: 116 l2, ebpnpelnmr, 2 b{und`, 4 jnlm`r{, jsum, 2 q`msgk`
(q reok{lh onk`lh), j`ohr`k|m{i ondb`k, 1 qnrj` gelkh, `brnmnlmne nrnokemhe.
Qrem{ b onkrnp` jnrek|v` ok~q bngdsxm` opnqknij` 3 ql, ok~q qerj`-rhmj b ...
| Aug 2, 7:32 am 2010 |
| Tranh La Viet |
| Aug 2, 5:35 am 2010 |
| rhsv6 | bgpd - How to append (not replace) communities ?
Hi,
At the moment, in my bgpd.conf, I've got the following amongst my
import filters :
# Set communities (AS64515)
match from group "AS64515" community 64516:* set community delete
64516:*
match from group "AS64515" set {community 64516:2,community
64516:64515}
Basically the goal is to :
(1) Remove any communities that would match those I use internally
(i.e. 64516:*)
(2) Append my communities to existing communities being received.
Number two is where I'm having problems. For ...
| Aug 2, 5:36 am 2010 |
| stolendata.net | Re: 24->16 bit audio
Where did you get this number from? A 16-bit source signal has, on a
0.3V analog output, a resolution finer than 0.000005 volts per step,
which is a voltage so tiny that it gets lost several times over in the
SNR already at the DAC stage of a fine "HiFi soundcard" - before the
signal has even had a chance to disappear in the natural noise of
audio cabling and the amplifier stage.
| Aug 2, 10:28 am 2010 |
| Remco | 24->16 bit audio
I was looking at the Alesis iO|2 USB audio interface. It seems like a nice
device, especially since it appears to comply to both the USB-audio as well
as the USB-MIDI standard, see:
http://www.linuxquestions.org/
questions/linux-hardware-18/2-soundcards-alesis-io|2-and-nvidia-ck804-512025/
However, it appears to limit audio to 24-bits @ 44.1/48kHz.
To my understanding, applications accessing this device through libsndio will
use its native resolution. For applications requiring 16-bit ...
| Aug 2, 5:10 am 2010 |
| Jacob Meuser | Re: 24->16 bit audio
I believe mplayer should work at 24 bits with a 24-bit uaudio.
I don't recall if I tried that or not.
yes, not many applications support 24-bit audio, so you'll need
aucat for "general use". works fine for me. note: if you have
an azalia you might be able to make it use 24-bit in the hardware
to get an idea.
there may be some applications/libraries that could support 24-bit
but don't. perhaps there are some ports that could support 24-bit
formats but don't. gstreamer comes to mind. ...
| Aug 2, 6:21 am 2010 |
| Alexandre Ratchov | Re: 24->16 bit audio
The trunctation of least significant bits is equivalent to
around -96dB noise. This is not far from what mixers,
preams, cables, etc generate.
The aucat resampler generates a slightly audible noise, so
it shouldn't be used when recoring if quality is important.
I'd recommend, completely avoiding resampling by using a
common sample rate for all recordings and/or resampling
off-line at the end.
so, yes, aucat is equivalent to a 16-bit device as long as
The fact that the device ...
| Aug 2, 6:11 am 2010 |
| Gregory Edigarov | xxkb in 4.8-BETA
Hello,
There is a trouble switching keyboard maps in 4.8-BETA:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp_led:scroll,grp:ctrl_shift_toggle"
EndSection
strange, but this only adds only "us" layout, so I've put
setxkbmap -layout us,ru
into my .xsession file, and after that everithing works fine.
--
With best regards,
Gregory ...
| Aug 2, 4:08 am 2010 |
| Theo de Raadt | Re: Question about suspend+resume & X11-application buggy-ness
Suspend and resumes are completely invisible, except that time makes
an uncomfortable jump forward. Processes are not made aware in any
way. There is no API to sense the transition (at this time).
BTW, sending any signal would be violate the rules. We cannot
This sounds like a bug in either X or the graphics card driver; X
thinks the graphics card memory is still intact, but it isn't, and is
reusing it. I don't know the actual architecture but drivers which
suspect their memory will ...
| Aug 1, 8:47 pm 2010 |
| Peter Merritt | Re: OBSD 4.7 and Via C7 motherboards problem
Thanks for the help, does look correct to me.
Peter
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:30:18:ad:ed:96
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX
full-duplex,rxpause,txpause)
status: active
inet6 fe80::230:18ff:fead:ed96%re0 prefixlen 64 scopeid 0x1
inet XX.171.201.186 netmask 0xfffff800 broadcast XX.171.207.255
re1: ...
| Aug 1, 6:43 pm 2010 |
| Andrew Klettke |
| Aug 2, 3:26 pm 2010 |
| Owain Ainsworth | Re: Question about suspend+resume & X11-application buggy-ness
This would be an X/kernel bug. I have a couple of theories and am
looking into it. Depending on work commitments expect something in a day
or three.
Ta,
-0-
--
Nearly all men can stand adversity, but
if you want to test a man's character, give him power.
-- Abraham Lincoln
| Aug 2, 7:45 am 2010 |
| patrick keshishian | Re: macppc: firefox 3.6.8 crashing (same as 3.6.7)
Hi,
I actually had that in there "just in case". I took a small break from
this (hence the late reply -- just too frustrating).
So it looks like the so-libs aren't stripped but fireforx-bin is. I
found it's unstripped copy in dist/bin under
pobj/mozilla-firefox-3.6.8/mozilla-1.9.2/. Running that version
produces a core with not too useful of a backtrace [1].
This is looking too strange. So I wrote a tinsy program that loads a
.so file just to see if the problem is a more system-wide one ...
| Aug 1, 10:24 pm 2010 |
| Matthieu Herrb |
| Aug 1, 11:12 pm 2010 |
| patrick keshishian |
| Aug 1, 11:53 pm 2010 |
| SJP Lists | Re: OpenBSD Training
You can still use the vSphere Client and point it to the ESXi server,
instead of a vSphere server.
In fact, from the free ESXi web interface you can download the vSphere
client to use in that fashion.
Shane
| Aug 2, 6:06 am 2010 |
| Jiri B. |
| Aug 2, 4:13 pm 2010 |
