I confirm -- disabling softraid did not fix it.
Actually, I went for option of installing OpenBSD after reading Freds'
webpage on the topic ;-).
/wbr
Ariel Burbaickij
On Sun, Jul 11, 2010 at 12:16 AM, Fred Crowson <fred.crowson@gmail.com>
wrote:
quoted text > On 10 July 2010 06:58, Joel Sing <jsing@openbsd.org> wrote:
>> Hi Ariel/Fred,
>>
>> Could one of you please try a current kernel with softraid disabled (boot
>> with 'bsd -c' and type 'disable softraid' and then 'quit' at the UKC
> prompt)
>> and let me know if this resolves the issue?
>>
>> Thanks,
>>
>> Joel
>
> Hi Joel,
>
> Booting with softraid disabled does not solve the issue.
>
> Hopefully, I'll find time over the next few weeks to do more investigations
>
> thanks
>
> Fred
>
> Output of boot process follows:
>
> Connected
>>> OpenBSD/i386 BOOT 3.02
> boot> bsd -c
> booting hd0a:bsd:
>
/-\|/8127708-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
quoted text >
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
quoted text >
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
quoted text >
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
quoted text >
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
quoted text >
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
quoted text > |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+1088136\
> [61+365104|/-\|/-\|/-\|/-\|/-\|/+350630-\|/-\|/-\|/-\|/-\|/-]=0x978d18
> entry point at 0x200120
>
> [ using 716212 bytes of bsd ELF symbol table ]
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2010 OpenBSD. All rights reserved.
http://www.OpenBSD.org
quoted text >
> OpenBSD 4.7-current (GENERIC) #111: Sat Jul 10 00:33:14 MDT 2010
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 121 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem = 16478208 (15MB)
> avail mem = 6356992 (6MB)
> User Kernel Config
> UKC> disable softraid
> 9 softraid0 disabled
> UKC> quit
> Continuing...
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 11/11/97
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high, charging
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xe4000/0xc000
> cpu0 at mainbus0: (uniprocessor)
> cpu0: F00F bug workaround installed
> isa0 at mainbus0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
> wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> wdc0 at isa0 port 0x1f0/8 irq 14
> wd0 at wdc0 channel 0 drive 0: <BI-MDDAL2-6102>
> wd0: 16-sector PIO, LBA, 1551MB, 3177216 sectors
> wd0(wdc0:0:0): using BIOS timings
> sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
> midi0 at sb0: <SB MIDI UART>
> audio0 at sb0
> opl0 at sb0: model OPL3
> midi1 at opl0: <SB Yamaha OPL3>
> wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
> audio1 at wss0
> pcppi0 at isa0 port 0x61
> midi2 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
> pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
> pcmcia0 at pcic0 controller 0 socket 0
> xe0 at pcmcia0 function 0 "Xircom, CreditCard 10Base-T, PS-CE2-10"
> port 0x340/16, irq 9: address 00:80:c7:42:37:d9
> pcmcia1 at pcic0 controller 0 socket 1
> pcic0: irq 11, polling enabled
> biomask e145 netmask e345 ttymask fbdf
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> root device softraid not configured
> kernel: integer divide fault trap, code=0
> Stopped at cpu_switchto+0x76: popl %ebx
> ddb> ps
> PID PPID PGRP UID S FLAGS WAIT COMMAND
> 8 0 0 0 2 0x100200 pfpurge
> 7 0 0 0 2 0x100200 pcic0,0,1
> 6 0 0 0 2 0x100200 pcic0,0,0
> 5 0 0 0 2 0x100200 apm0
> 4 0 0 0 2 0x100200 syswq
> 3 0 0 0 2 0x100200 idle0
> 2 0 0 0 2 0x100200 kmthread
> * 1 0 0 0 7 0 swapper
> 0 -1 0 0 3 0x80200 wdccmd swapper
> ddb> trace
> cpu_switchto(d0202fe5,0,d0b7af08,d03ecf17,d09a1458) at cpu_switchto+0x76
> end(0,0,0,efffeecc,efffeecc) at 0xd0b7aed8
> (null)(d0d1c004,d0997aa0,0,73637376,3069) at 0
> ddb> boot poweroff
>
> Attempting to power down...
> ~
> [EOT]
