Hello,

I'm using the german provider strato.de and had to jump
through few hoops to install (unsupported by them)
OpenBSD  at the rented Celeron server (actually 2;
dmesg attached just FYI) - I followed the instructions at http://dettus.net

Now after few years I'd like to upgrade to their
"PowerServer L" with Opteron 1212 HE CPU
http://www.strato.de/server/dedicated/power/linux/

Is anybody already using such a server,
does it work with the latest OpenBSD?

(Also I guess I should take amd64 there?)

Thank you
Alex
OpenBSD 4.5-stable (GENERIC) #0: Sat May 30 21:04:23 CEST 2009
    afarber@hXXXXXX.serverkompetenz.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem  = 536375296 (511MB)
avail mem = 510361600 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/03/04, BIOS32 rev. 0 @ 0xfb330, SMBIOS rev. 2.3 @ 0xf0800 (37 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date 02/03/2004
bios0: Supermicro P4SBR/P4SBE
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP
acpi0: wakeup devices HUB0(S5) USB0(S3) USB1(S3) MODM(S4) UAR1(S5) UAR2(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (HUB0)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe3000000, size 0x400000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x05
pci2 at ppb1 bus 2
fxp0 at pci2 dev 6 function 0 "Intel 8255x" rev 0x08, i82559: irq 11, address 00:30:48:53:3c:96
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci2 dev 7 function 0 "Intel 8255x" rev 0x08, i82559: irq 10, address 00:30:48:53:3c:97
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci2 dev 8 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L060AVV207-0>
wd0: 16-sector PIO, LBA48, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x05: irq 9
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB SDRAM non-parity PC133CL3
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f365 netmask ff65 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
arpresolve: unresolved and rt_expire == 0