Hi

I've recently installed OpenBSD 4.7 Release on my laptop, an Acer Aspire 
One with SSD. Enjoying the improved performance I decided I wanted to 
follow current. I was hoping for webcam and ath0 support. (Apparently 
I'm SOL when it comes to the ath0, its one of 'those' chipsets that 
doesn't work)
The major problem I have is that on current (snapshot or compiled latest 
source) X stops working.
In release everything works fine, run gnome, got nice visual effects, 
everything seems fine.
In current (snapshot June 7th) when X tries to start the LCD panel turns 
off completely (not just goes dark) actually goes black like it does 
when the computer powers down.
I'm happy to substitute the ath0 with my ural or rum but I can't live 
without X working.
Attached is -release and -current dmesg along with pcidump -v

Regards
Dusty
Domain /dev/pci0:
 0:0:0: Intel 82945GME Host
	0x0000: Vendor ID: 8086 Product ID: 27ac
	0x0004: Command: 0006 Status ID: 2090
	0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 03
	0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
	0x0010: BAR empty (00000000)
	0x0014: BAR empty (00000000)
	0x0018: BAR empty (00000000)
	0x001c: BAR empty (00000000)
	0x0020: BAR empty (00000000)
	0x0024: BAR empty (00000000)
	0x0028: Cardbus CIS: 00000000
	0x002c: Subsystem Vendor ID: 1025 Product ID: 015b
	0x0030: Expansion ROM Base Address: 00000000
	0x0038: 00000000
	0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
	0x00e0: Capability 0x09: Vendor Specific
 0:2:0: Intel 82945GME Video
	0x0000: Vendor ID: 8086 Product ID: 27ae
	0x0004: Command: 0007 Status ID: 0090
	0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 03
	0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
	0x0010: BAR mem 32bit addr: 0x58480000
	0x0014: BAR io addr: 0x000060c0
	0x0018: BAR mem prefetchable 32bit addr: 0x40000000
	0x001c: BAR mem 32bit addr: 0x58500000
	0x0020: BAR empty (00000000)
	0x0024: BAR empty ...
[ message continues ]

Hi

I also crash X server. My graphics controller is an Intel GMA 3150 tested
with OpenBSD 4.7.


[ message continues ]

On Thu, 10 Jun 2010 23:32:56 +0200

Don't hijack threads.
Search the mailinglist first.

[ message continues ]

Sorry


-- 
@plus

[ message continues ]

I haven't crashed the X server per say. Its working brilliantly on 
-release. On -current X appears to load but the LCD panel powers off. I 
can CTL+ALT+F1 and blindly log in and reboot, so the system is still 
responsive.
I've tried this with both -release and -current bsd.mp as well as 
-release and -current bsd with the same result.


[ message continues ]

Can you provide Xorg.log from both?

also can you confirm that the X snap was also the latest?

So far there isn't much informatino to go on.

can you ssh to the machine after the screen goes black and get
logs/dmesg from the machine then?

-0-
-- 
While it may be true that a watched pot never boils, the one you don't
keep an eye on can make an awful mess of your stove.
		-- Edward Stevenson

[ message continues ]