> On Wed, Dec 08, 2010 at 09:59:58AM +0100, Benjamin Nadland wrote:
> > I just got my TI MSP430 Launchpad and saw that msp430-gcc and
> > mspdebug got imported into ports.
> > >From the commit message: "One will need an upcoming umodem.c commit by jakemsr@,
> > and an upcoming mspdebug port in order to actually program the devices though."
> > Is this the mentioned umodem.c commit:
> >
http://marc.info/?l=openbsd-cvs&m=129125391912134&w=2 ?
> >
> > Compiling works(?) as expected. But when I try to upload the binary to
> > the chip, I get the following errors:
> >
> > $ mspdebug rf2500
> > MSPDebug version 0.13 - debugging tool for MSP430 MCUs
> > Copyright (C) 2009, 2010 Daniel Beer <daniel@tortek.co.nz>
> > This is free software; see the source for copying conditions. There is NO
> > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> > usbutil: unable to find a device matching 0451:f432
> >
> > $ mspdebug rf2500 -U 0451:f432
> > MSPDebug version 0.13 - debugging tool for MSP430 MCUs
> > Copyright (C) 2009, 2010 Daniel Beer <daniel@tortek.co.nz>
> > This is free software; see the source for copying conditions. There is NO
> > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> > usbutil: unable to find 451:000
> >
> > (might be unrelated, but why did it search for 451:000 ?)
> >
> > $ mspdebug rf2500 --usb-list
> > Devices on bus 000:
> > Devices on bus 000:
> > Devices on bus 000:
> > Devices on bus 000:
> > Devices on bus 000:
> >
> > So it doesn't find it, but it is plugged in and recognized:
> >
> > $ usbdevs -v
> > Controller /dev/usb0:
> > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
> > port 1 powered
> > port 2 powered
> > port 3 powered
> > port 4 powered
> > port 5 powered
> > port 6 powered
> > port 7 addr 3: high speed, power 100 mA, unconfigured, RTL8187B(0x8198), Realtek(0x0bda), rev 2.00, iSerialNumber 00e04c000001
> > port 8 powered
> > Controller /dev/usb1:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> > port 1 powered
> > port 2 powered
> > Controller /dev/usb2:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> > port 1 addr 2: full speed, power 100 mA, config 1, Texas Instruments MSP-FET430UIF(0xf432), Texas Instruments(0x0451), rev 1.00, iSerialNumber A7FF41CE96103E46
> > port 2 powered
> > Controller /dev/usb3:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> > port 1 powered
> > port 2 powered
> > Controller /dev/usb4:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> > port 1 powered
> > port 2 powered
> >
> > In my dmesg it shows that the launchpad attaches as uhidev(4), does this mean
> > that the kernel is to old and does not contain the usb_quirks.c commit from
> > dec 1 to prevent this? (
http://marc.info/?l=openbsd-cvs&m=129127220327339&w=2)
> > (Just finished upgrading to this version a few hours ago,
> > currently downloading another, newer snapshot. Might take some time though.)
> >
> > $ dmesg
> > OpenBSD 4.8-current (GENERIC) #510: Sat Dec 4 12:03:30 MST 2010
> > deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE
> > real mem = 1060163584 (1011MB)
> > avail mem = 1032769536 (984MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 05/09/08, SMBIOS rev. 2.4 @ 0xe8e70 (32 entries)
> > bios0: vendor Acer version "v0.3114" date 05/09/2008
> > bios0: Acer AOA150
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
> > acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 133MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 0, remapped to apid 4
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 4 (P32_)
> > acpiprt2 at acpi0: bus 1 (EXP1)
> > acpiprt3 at acpi0: bus 2 (EXP2)
> > acpiprt4 at acpi0: bus -1 (EXP3)
> > acpiprt5 at acpi0: bus 3 (EXP4)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: C3, C2, C1, PSS
> > acpibtn0 at acpi0: PWRB
> > acpibtn1 at acpi0: LID0
> > acpibtn2 at acpi0: SLPB
> > acpibat0 at acpi0: BAT1 not present
> > acpiac0 at acpi0: AC unit online
> > acpivideo0 at acpi0: OVGA
> > acpivout0 at acpivideo0: CRT1
> > acpivout1 at acpivideo0: DTV1
> > acpivout2 at acpivideo0: DFP1
> > acpivout3 at acpivideo0: LCD_
> > acpivout4 at acpivideo0: DTV2
> > acpivout5 at acpivideo0: DFP2
> > bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000
> > cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
> > vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > intagp0 at vga1
> > agp0 at intagp0: aperture at 0x40000000, size 0x10000000
> > inteldrm0 at vga1: apic 4 int 16 (irq 11)
> > drm0 at inteldrm0
> > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 int 16 (irq 11)
> > azalia0: codecs: Realtek ALC268
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 (irq 255)
> > pci1 at ppb0 bus 1
> > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 (irq 255)
> > pci2 at ppb1 bus 2
> > re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), apic 4 int 17 (irq 11), address 00:1e:68:ab:b0:0b
> > rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
> > ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19 (irq 255)
> > pci3 at ppb2 bus 3
> > "JMicron SD/MMC" rev 0x00 at pci3 dev 0 function 0 not configured
> > sdhc0 at pci3 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 4 int 19 (irq 11)
> > sdmmc0 at sdhc0
> > "JMicron Memory Stick" rev 0x00 at pci3 dev 0 function 3 not configured
> > "JMicron xD" rev 0x00 at pci3 dev 0 function 4 not configured
> > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16 (irq 11)
> > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17 (irq 11)
> > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 (irq 11)
> > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19 (irq 11)
> > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16 (irq 11)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> > pci4 at ppb3 bus 4
> > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
> > pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> > wd0 at pciide0 channel 0 drive 0: <ST9120817AS>
> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17 (irq 11)
> > iic0 at ichiic0
> > spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci3: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > mtrr: Pentium Pro MTRR support
> > uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 2
> > video0 at uvideo0
> > urtw0 at uhub0 port 7 "Realtek RTL8187B" rev 2.00/2.00 addr 3
> > urtw0: RTL8187B rev E, address 00:24:d2:2f:6d:1d
> > vscsi0 at root
> > scsibus0 at vscsi0: 256 targets
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
> > scsibus1 at softraid0: 1 targets
> > sd0 at scsibus1 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct fixed
> > sd0: 86811MB, 512 bytes/sec, 177790828 sec total
> > umodem0 at uhub1 port 1 configuration 1 interface 0 "Texas Instruments Texas Instruments MSP-FET430UIF" rev 1.10/1.00 addr 2
> > umodem0: no pointer to data interface
> > uhidev0 at uhub1 port 1 configuration 1 interface 1 "Texas Instruments Texas Instruments MSP-FET430UIF" rev 1.10/1.00 addr 2
> > uhidev0: iclass 3/0, 211 report ids
> > uhid0 at uhidev0 reportid 1: input=1, output=1, feature=0
> > uhid1 at uhidev0 reportid 2: input=2, output=2, feature=0
> > uhid2 at uhidev0 reportid 3: input=3, output=3, feature=0
> > uhid3 at uhidev0 reportid 4: input=4, output=4, feature=0
> > uhid4 at uhidev0 reportid 5: input=5, output=5, feature=0
> > uhid5 at uhidev0 reportid 6: input=6, output=6, feature=0
> > uhid6 at uhidev0 reportid 7: input=7, output=7, feature=0
> > uhid7 at uhidev0 reportid 8: input=8, output=8, feature=0
> > uhid8 at uhidev0 reportid 9: input=9, output=9, feature=0
> > uhid9 at uhidev0 reportid 10: input=10, output=10, feature=0
> > uhid10 at uhidev0 reportid 11: input=11, output=11, feature=0
> > uhid11 at uhidev0 reportid 12: input=12, output=12, feature=0
> > uhid12 at uhidev0 reportid 13: input=13, output=13, feature=0
> > uhid13 at uhidev0 reportid 14: input=14, output=14, feature=0
> > uhid14 at uhidev0 reportid 15: input=15, output=15, feature=0
> > uhid15 at uhidev0 reportid 16: input=16, output=16, feature=0
> > uhid16 at uhidev0 reportid 17: input=17, output=17, feature=0
> > uhid17 at uhidev0 reportid 18: input=18, output=18, feature=0
> > uhid18 at uhidev0 reportid 32: input=32, output=32, feature=0
> > uhid19 at uhidev0 reportid 63: input=63, output=63, feature=0
> > uhid20 at uhidev0 reportid 200: input=0, output=0, feature=1
> > uhid21 at uhidev0 reportid 201: input=0, output=0, feature=2
> > uhid22 at uhidev0 reportid 202: input=0, output=0, feature=2
> > uhid23 at uhidev0 reportid 203: input=0, output=0, feature=1
> > uhid24 at uhidev0 reportid 204: input=0, output=0, feature=1
> > uhid25 at uhidev0 reportid 205: input=0, output=0, feature=1
> > uhid26 at uhidev0 reportid 210: input=0, output=0, feature=1
> > uhid27 at uhidev0 reportid 211: input=0, output=0, feature=1
> >
> > $ pkg_info | grep msp
> > msp430-binutils-2.20 GNU binutils for msp430
> > msp430-gcc-4.4.4 GNU Compiler Collection for msp430
> > msp430-gdb-7.1 GNU debugger for msp430
> > msp430-libc-20101113 GNU libc for msp430
> > mspdebug-0.13 debugger for use with MSP 430 MCUs
>
> --
>
jakemsr@sdf.lonestar.org
> SDF Public Access UNIX System -
http://sdf.lonestar.org
