hi, dear friend both cables ( cable 1 and 2 )  are crossover and is
conectic like this,
and no internet in client, help please

quoted text
>> ADSL (router ext)
>>
>> 192.168.1.1     ( cable 1 )
>>    |
>>    |
>>  xl0
>>  192.168.1.101 ( cable 1)
>> gatewayopenbsd4.8-
>> xl1
>>  192.168.0.1    ( cable 2)
>>   |
>>   |
>> Client
>>  192.168.0.10   ( cable 2)

*****************************************************************************************
2010/12/2, Jan Johansson <janj+openbsd@wenf.org>:
quoted text
> david carrasco <dacarr25@gmail.com> wrote:
>> answer your question,
>> i believe the problern is static routing setting on all
>> cable is okey
>> please help, with set up static client,gateway, and router (dsl ext)
>>
>> On gateway start "tcpdump -i xl1
>> ************************************************************************
>> gateway.my.domain (192.168.0.1) at 00:60:97:be:ca:2a on xl1 static
>> ? (192.168.1.1) at 00:1d:0f:fc:95:de on xl0
>> *************************************************************************
>>
>>
>>  then on client start "ping
>> > 192.168.0.1". Do you see the packets?
>> /////////////////////////////////////////////////////////////////////////////////////////////////////////////
>> --- 192.168.0.1 ping statistics ---
>> 3 packets transmitted, 0 packets received, 100.0% packet loss
>> ///////////////////////////////////////////////////////////////////////////////////////////////////////////////
>>
>>
>>  After you stop the ping run "arp -a" on both client and gateway.
>> > Do you see an entry for the other host?
>> in gateway
>> ****************************************************
>> gateway.my.domain (192.168.0.1) at 00:60:97:be:ca:2a on xl1 static
>> ? (192.168.1.1) at 00:1d:0f:fc:95:de on xl0
>> ****************************************************
>>
>>
>> in client
>> ///////////////////////////////////////////////////////////////////////////////
>> nothing out screen
>> ///////////////////////////////////////////////////////////////////////////////
>
> I am having a hard time following what you are saying.
>
> On the gateway run "ping 192.168.0.10" when you stop that run
> "arp -a" in the output you should see one of thease lines:
>
> This one means your layer 2 such as cable is broken.
> ? (192.168.0.10) at (incomplete) on xl1
>
> This one means your layer 3 such as packet filter is broken.
>  ? (192.168.0.10) at 00:0c:76:bb:00:5a on xl1
>
> But as another subscriber noted:
>
> vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>     media: Ethernet autoselect (none)
>     status: no carrier
>
> and
>
> xl1: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
>         media: Ethernet autoselect (none)
>         status: no carrier
>
> which means neither your gateway or your client has a working
> cable.
>
> Are you using a switch or are these machines connected to each
> other with a direct cable? If you are using a direct cable you
> will need a crossover cable as 100baseTX does not support auto
> MDI/MDI-X.