On Tue, Dec 28, 2010 at 06:42:12PM -0800, Mike Larkin wrote:
quoted text
> On Mon, Dec 27, 2010 at 12:18:56PM -0800, patrick keshishian wrote:
> > Hi,
> > 
> > I am having a few issues with this laptop including not being able to
> > make it sleep/suspend and/or wake up. Who are the right (interested)
> > people I should/can send acpidump to? Anything else I should include?
> > 
> > zzz will seemingly attempt to suspend the box. But it doesn't fully
> > finish (I assume) leaving the display screen on, but at this point the
> > box is hung. Can't ssh to it or ping it. I think caps-lock will toggle
> > on/off the caps-lock light, but nothing else responds. Only choice is
> > to hold down the power button for 4 seconds for a hard restart.
> 
> Edit sys/dev/acpi.c, search for pci_dopm. Change the assignment from
> 1 to 0 and rebuild your kernel.
> 

er. That was supposed to read /sys/dev/acpi/acpi.c

quoted text
> -ml
> 
> > 
> > Also, the built-in weefee card will hang the box on `ifconfig athn0 scan`.
> > 
> > Thanks,
> > --patrick
> > 
> > 
> > 
> > OpenBSD 4.8-current (GENERIC) #379: Tue Dec 21 19:17:45 MST 2010
> >     deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
> > real mem = 1876754432 (1789MB)
> > avail mem = 1812852736 (1728MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf10d0 (17 entries)
> > bios0: vendor Phoenix Technologies LTD version "v1.3201" date 06/18/2009
> > bios0: Gateway LT31
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP APIC MCFG HPET BOOT SLIC
> > acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI(S3) HDAU(S3)
> > acpitimer0 at acpi0: 3579545 Hz, 32 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: AMD Athlon(tm) Processor L110, 1197.21 MHz
> > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> > 64b/line 16-way L2 cache
> > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > cpu0: apic clock running at 199MHz
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
> > acpihpet0 at acpi0: 14318180 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (PB3_)
> > acpiprt2 at acpi0: bus -1 (PB4_)
> > acpiprt3 at acpi0: bus 3 (PB5_)
> > acpiprt4 at acpi0: bus 4 (PB6_)
> > acpiprt5 at acpi0: bus -1 (PB7_)
> > acpiprt6 at acpi0: bus 9 (P2P_)
> > acpiprt7 at acpi0: bus 1 (AGP_)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: C3, C2
> > acpitz0 at acpi0: critical temperature 100 degC
> > acpiac0 at acpi0: AC unit offline
> > acpibat0 at acpi0: BAT1 model "UM09B44" serial 210 type LION oem "SONY"
> > acpibtn0 at acpi0: LID_
> > acpibtn1 at acpi0: SLPB
> > acpibtn2 at acpi0: PWRB
> > acpivideo0 at acpi0: VGA_
> > acpivout0 at acpivideo0: LCD_
> > acpivout1 at acpivideo0: CRT1
> > acpivout2 at acpivideo0: TV__
> > acpivout3 at acpivideo0: DFP1
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00
> > ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 5 function 0 "ATI Radeon X1250 IGP" rev 0x00
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00
> > pci2 at ppb1 bus 3
> > re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
> > (0x2480), apic 1 int 17 (irq 5), address 00:23:8b:ef:3a:a7
> > rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
> > ppb2 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00
> > pci3 at ppb2 bus 4
> > athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 1 int
> > 18 (irq 11), address 00:26:5e:0f:bc:3a
> > athn0: AR9285 rev 2 (1T1R), ROM rev 13
> > ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int
> > 22 (irq 11), AHCI 1.1
> > scsibus0 at ahci0: 32 targets
> > sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK2555GS, FG00> SCSI3 0/direct fixed
> > sd0: 238475MB, 512 bytes/sec, 488397168 sec total
> > ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int
> > 16 (irq 10), version 1.0, legacy support
> > ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int
> > 17 (irq 5), version 1.0, legacy support
> > ohci2 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int
> > 17 (irq 5), version 1.0, legacy support
> > ohci3 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int
> > 18 (irq 11), version 1.0, legacy support
> > ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int
> > 19 (irq 11)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI
> > iic0 at piixpm0
> > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> > pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA,
> > channel 0 configured to compatibility, channel 1 configured to
> > compatibility
> > azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic
> > 1 int 16 (irq 10)
> > azalia0: codecs: Realtek ALC272
> > audio0 at azalia0
> > pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
> > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
> > pci4 at ppb3 bus 9
> > pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
> > pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
> > pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
> > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00:
> > core rev DH-G2
> > usb1 at ohci0: USB revision 1.0
> > uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at ohci1: USB revision 1.0
> > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at ohci2: USB revision 1.0
> > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at ohci3: USB revision 1.0
> > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > mtrr: Pentium Pro MTRR support
> > uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony
> > Electronics Co., Ltd. CNF9011" rev 2.00/13.57 addr 2
> > video0 at uvideo0
> > vscsi0 at root
> > scsibus1 at vscsi0: 256 targets
> > softraid0 at root
> > root on sd0a swap on sd0b dump on sd0b