> > I can ping 192.168.10.12 from the Beagle, and 192.168.10.10 from the PC, but
quoted text
> I cannot ping 192.168.1.101 (the PC's wifi connection from the Beagle,
> "network is unreachable").
> > The first time I set this up (a few days ago), I could ping the outside
> world from the Beagle running Angstrom. I loaded Ubuntu onto the Beagle tried
> the setup again, and could not reach the outside internet. Now I've gone back
> to Angstrom and cannot get the connection to come back up. I am not sure why
> it worked before and not now but it seems like my OpenBSD bridge0 is not
> working. When it was working, typing ifconfig (as below) I seem to remember
> the output for bridge0 was longer than it is now, but am not sure. Probably it
> is some simple forgotten command but I do not know what it could be.
> >

quoted text
> > root@beagleboard:~# ping 192.168.1.101
> > connect: Network is unreachable
> > root@beagleboard:~# route
> > Kernel IP routing table
> > Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> > default         192.168.10.12   255.255.255.0   UG    0      0        0
> usb0
> > 192.168.10.0    *               255.255.255.0   U     0      0        0
> usb0
> >
> >
> -----------------------------------------------------------------------------
> -----
> >
> >
> 
> If a DHCP server is on the 192.168.1.0/24 block, you could configure
> your beagleboard to get an address through DHCP, since you set up the
> bridge.
> 
> If you're using a bridge, you don't need to set
> "net.inet.ip.forwarding" to 1, as you aren't actually routing packets,
> you're bridging them.
> (see http://www.openbsd.org/faq/faq6.html#Bridge)
> 
> --AlanCF
> 

But since the 192.168.1.0 network is unreachable I don't think the dhcp
request would get through anyway....