On Sun, Dec 19, 2010 at 2:21 AM, Hugo Osvaldo Barrera
<hugo@osvaldobarrera.com.ar> wrote:
quoted text
> I've an Atheros AR5424, which OpenBSD seems to detect correctly, but
> does not really work.
> The ath driver is used, and the man pages don't list this model as being
> supported, but I though I might ask if there was some fix/etc.
>
>
> # ifconfig ath0 chan
> ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
> B  B  B  B lladdr 00:1f:e2:a2:c5:4f
> B  B  B  B priority: 4
> B  B  B  B groups: wlan
> B  B  B  B media: IEEE802.11 autoselect
> B  B  B  B status: no network
> B  B  B  B ieee80211: nwid ""
> B  B  B  B  B  B  B  B chan B freq B  B  B properties
> # ifconfig ath0 scan
> ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
> B  B  B  B lladdr 00:1f:e2:a2:c5:4f
> B  B  B  B priority: 4
> B  B  B  B groups: wlan
> B  B  B  B media: IEEE802.11 autoselect
> B  B  B  B status: no network
> B  B  B  B ieee80211: nwid ""
> <blue>ath0: unable to reset hardware; hal status 4294934528
> #
>
> In reference to the above blue error, the man pages say it should not
> happen. B Again, the card is not listed as supported either.
>
> I don't mind providing more feedback/testing patches/etc.
> Cheers, and thanks.
>
> dmesg:
>
> OpenBSD 4.8-current (GENERIC.MP) #589: Mon Oct 18 16:29:17 MDT 2010
> B  B deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 2134712320 (2035MB)
> avail mem = 2064023552 (1968MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2c30 (25 entries)
> bios0: vendor Hewlett-Packard version "F.33" date 04/29/2008
> bios0: Hewlett-Packard Compaq Presario C700 Notebook PC
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC HPET MCFG ASF! SLIC BOOT SSDT
> acpi0: wakeup devices SLPB(S4) P32_(S4) EXP1(S4) EXP2(S4) EXP3(S4)
> EXP4(S4) EXP5(S4) EXP6(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.28 MHz
> cpu0:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,NXE,LONG
quoted text
> cpu0: 1MB 64b/line 4-way L2 cache
> cpu0: apic clock running at 132MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHzI doesn't
work.

http://marc.info/?l=openbsd-misc&m=126420221716157&w=2
quoted text
> cpu1:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,NXE,LONG
quoted text
> cpu1: 1MB 64b/line 4-way L2 cache
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 4
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (P32_)
> acpiprt2 at acpi0: bus 1 (EXP1)
> acpiprt3 at acpi0: bus -1 (EXP2)
> acpiprt4 at acpi0: bus -1 (EXP3)
> acpiprt5 at acpi0: bus -1 (EXP4)
> acpiprt6 at acpi0: bus -1 (EXP5)
> acpiprt7 at acpi0: bus -1 (EXP6)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature 100 degC
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> acpibtn2 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "Primary" type Lion oem "Hewlett-Packard"
> acpiac0 at acpi0: AC unit online
> acpivideo0 at acpi0: OVGA
> cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0x80000000, size 0x10000000
> inteldrm0 at vga1: apic 4 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic
> 4 int 22 (irq 11)
> azalia0: codecs: Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int
> 18 (irq 11)
> pci1 at ppb0 bus 1
> ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16
> (irq 11)
> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:1f:e2:a2:c5:4f
> uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int
> 21 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int
> 20 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int
> 19 (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int
> 23 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
> pci2 at ppb1 bus 2
> rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: apic 4 int 16 (irq
> 11), address 00:1e:ec:78:5b:13
> rlphy0 at rl0 phy 0: RTL internal PHY
> pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH09> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 disabled (no drives)
> ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 4
> int 17 (irq 10), AHCI 1.1
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1200BEVS-6, 01.0> SCSI3
> 0/direct fixed
> sd0: 114473MB, 512 bytes/sec, 234441648 sec total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4
> int 19 (irq 11)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW"
> rev 2.00/51.95 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
> 0/direct removable
> sd1: drive offline
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Syntek USB2.0 UVC
> PC Camera" rev 2.00/11.08 addr 3
> video0 at uvideo0
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB
> Receiver" rev 2.00/2.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 16 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB
> Receiver" rev 2.00/2.00 addr 2
> uhidev1: iclass 3/0, 17 report ids
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
> uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> softraid0: sd3 was not shutdown properly
> softraid0: sd3 was not shutdown properly
> scsibus4 at softraid0: 1 targets
> sd2 at scsibus4 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct
> fixed
> sd2: 111395MB, 512 bytes/sec, 228138538 sec total
> softraid0: volume sd2 is roaming, it used to be sd3, updating metadata
> ath0: unable to reset hardware; hal status 4294967295
> ath0: unable to reset hardware; hal status 4294934528
> umass1 at uhub0 port 2 configuration 1 interface 0 "Kingston
> DataTraveler 2.0" rev 2.00/1.10 addr 4
> umass1: using SCSI over Bulk-Only
> scsibus5 at umass1: 2 targets, initiator 0
> sd3 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0
> 0/direct removable
> sd3: 3824MB, 512 bytes/sec, 7831552 sec total
> ath0: unable to reset hardware; hal status 4294934528
> umass2 at uhub0 port 3 configuration 1 interface 0 "Sony "PSP" Type A"
> rev 2.00/1.00 addr 5
> umass2: using ATAPI over Bulk-Only
> scsibus6 at umass2: 2 targets, initiator 0
> sd4 at scsibus6 targ 1 lun 0: <SONY, "PSP" MS, 1.00> ATAPI 0/direct
> removable
> sd4: 7632MB, 512 bytes/sec, 15630336 sec total
>
>
> --
> Hugo Osvaldo Barrera
>
>

I doesn't work.

http://marc.info/?l=openbsd-misc&m=126420221716157&w=2