Alright, I see this in faq, sorry by my fault

I will include this in next time

Thanks Theo

2010/11/22 Theo de Raadt <deraadt@cvs.openbsd.org>

quoted text
> > OpenBSD 4.8 (GENERIC.MP) #335: Mon Aug 16 09:09:20 MDT 2010
> >     deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 2112618496 (2014MB)
> > avail mem = 2042560512 (1947MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfbf60 (49 entries)
> > bios0: vendor American Megatrends Inc. version "080012" date 03/07/2006
> > bios0: ECS P4M800PRO-M
> > acpi0 at bios0: rev 0
> > acpi0: sleep states S0 S1 S4 S5
> > acpi0: tables DSDT FACP APIC OEMB
> > acpi0: wakeup devices UAR1(S4) MC97(S4) USB1(S1) USB2(S1) USB3(S1)
> USB4(S1)
> > PCI1(S4) PCI2(S4) PCI3(S4) OLAN(S4) ILAN(S4) SLPB(S4) PWRB(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2795.01 MHz
> > cpu0:
> >
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
> > cpu0: 1MB 64b/line 8-way L2 cache
> > cpu0: apic clock running at 199MHz
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Pentium(R) D CPU 2.80GHz, 2794.56 MHz
> > cpu1:
> >
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG
> > cpu1: 1MB 64b/line 8-way L2 cache
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
> > ioapic0: misconfigured as apic 1, remapped to apid 2
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (P0P1)
> > acpicpu0 at acpi0acpi0: unable to load \_PR_.CPU1.SSDT
> >
> > acpicpu1 at acpi0acpi0: unable to load \_PR_.CPU2.SSDT
> >
> > acpitz0 at acpi0: critical temperature 110 degC
> > acpibtn0 at acpi0: SLPB
> > acpibtn1 at acpi0: PWRB
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
> > agp at pchb0 not configured
> > pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
> > pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
> > pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
> > pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
> > pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
> > ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: apic 2 int 16 (irq
> > 10), address 00:1a:3f:51:72:3d
> > rlphy0 at rl0 phy 0: RTL internal PHY
> > rl1 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq
> > 11), address 00:1a:3f:51:46:59
> > rlphy1 at rl1 phy 0: RTL internal PHY
> > rl2 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 18 (irq
> > 5), address 00:1a:3f:52:34:4f
> > rlphy2 at rl2 phy 0: RTL internal PHY
> > pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
> > pciide0: using apic 2 int 20 (irq 5) for native-PCI interrupt
> > wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD082GJ>
> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> > pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
> > channel 0 configured to compatibility, channel 1 configured to
> compatibility
> > pciide1: channel 0 disabled (no drives)
> > pciide1: channel 1 disabled (no drives)
> > uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int
> 21
> > (irq 10)
> > uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int
> 21
> > (irq 10)
> > uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int
> 21
> > (irq 11)
> > uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int
> 21
> > (irq 11)
> > ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21
> > (irq 5)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
> > viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
> > iic0 at viapm0
> > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> > vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: apic 2 int 23
> (irq
> > 10), address 00:16:ec:82:1c:3b
> > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
> > 0x004063, model 0x0032
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci3: USB revision 1.0
> > uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at mainbus0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > it0 at isa0 port 0x2e/2: IT8705F rev 3, EC port 0x290
> > mtrr: Pentium Pro MTRR support
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
> > kernel: protection fault trap, code=0
> > Stopped at pool_do_get+0x133: movq %rax,0x10(%rcx)
> >
> >
> > This occurred 2 times between 2 days
> >
>
> No, that is not what happened.  I bet the next thing it said is:
>
> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
>
> But you decided you are special, and don't want us to help us help you.