That looks like a hardware driver issue.

oga any insight?

On Tue, Nov 02, 2010 at 06:22:43PM +0200, Gregory Edigarov wrote:
quoted text
> 
> well, it seems like it was xorg.conf.
> 
> after running X -configure and reinstalling the config - problem seems
> to have wanished.
> 
> will observe the behaviour, though...
> 
> On Tue, 2 Nov 2010 17:36:08 +0200
> Gregory Edigarov <greg@bestnet.kharkov.ua> wrote:
> 
> > Hello, 
> > 
> > not sure about fvwm yet, but it seems like scrotwm can't work
> > correctly:
> > 
> > inteldrm0: gpu hung!
> > no reset function for chipset.
> > error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle
> > hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed to
> > idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl] *ERROR*
> > Reenabling wedged hardware, good luck inteldrm0: gpu hung!
> > no reset function for chipset.
> > 
> > 
> > under fvwm system seems to workOpenBSD 4.8 (GENERIC) #136: Mon Aug 16
> > 09:06:23 MDT 2010
> > deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0:
> > Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> > real mem  = 527986688 (503MB) avail mem = 509390848 (485MB) mainbus0
> > at root bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0
> > @ 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) bios0: vendor
> > American Megatrends Inc. version "P2.60" date 12/17/2003 acpi at
> > bios0 function 0x0 not configured mpbios0 at bios0: Intel MP
> > Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 99MHz
> > mpbios0: bus 0 is type PCI   
> > mpbios0: bus 1 is type PCI   
> > mpbios0: bus 2 is type PCI   
> > mpbios0: bus 3 is type PCI   
> > mpbios0: bus 4 is type ISA   
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev
> > 0x00) pcibios0: PCI bus #3 is the last bus
> > bios0: ROM list: 0xc0000/0xb400
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> > vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > intagp0 at vga1
> > agp0 at intagp0: aperture at 0xd0000000, size 0x8000000
> > inteldrm0 at vga1: apic 2 int 16 (irq 11)
> > drm0 at inteldrm0
> > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2
> > int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB"
> > rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2
> > "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12) ehci0 at pci0
> > dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq
> > 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root
> > hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel
> > 82801BA Hub-to-PCI" rev 0x82 pci1 at ppb0 bus 3
> > rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19
> > (irq 5), address 00:30:4f:23:15:f0 rlphy0 at rl0 phy 0: RTL internal
> > PHY rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int
> > 17 (irq 3), address 00:0b:6a:f8:3e:e3 rlphy1 at rl1 phy 0: RTL
> > internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC"
> > rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1
> > "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to
> > compatibility, channel 1 configured to compatibility wd0 at pciide0
> > channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48,
> > 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4,
> > Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at
> > atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW
> > AD-7170A, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO
> > mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 31 function 5 "Intel
> > 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97 ac97: codec
> > id 0x434d4961 (C-Media Electronics CMI9739) audio0 at auich0
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
> > lm1 at wbsio0 port 0x290/8: W83627HF
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > mtrr: Pentium Pro MTRR support
> > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech
> > USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2 uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
> > WARNING: / was not properly unmounted
> > inteldrm0: gpu hung!
> > no reset function for chipset.
> > error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle
> > hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed
> > to idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl]
> > *ERROR* Reenabling wedged hardware, good luck inteldrm0: gpu hung!
> > no reset function for chipset.
> > OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
> >     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> > real mem  = 527986688 (503MB) avail mem = 509390848 (485MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @
> > 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) bios0: vendor
> > American Megatrends Inc. version "P2.60" date 12/17/2003 acpi at
> > bios0 function 0x0 not configured mpbios0 at bios0: Intel MP
> > Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 99MHz
> > mpbios0: bus 0 is type PCI   
> > mpbios0: bus 1 is type PCI   
> > mpbios0: bus 2 is type PCI   
> > mpbios0: bus 3 is type PCI   
> > mpbios0: bus 4 is type ISA   
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev
> > 0x00) pcibios0: PCI bus #3 is the last bus
> > bios0: ROM list: 0xc0000/0xb400
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> > vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > intagp0 at vga1
> > agp0 at intagp0: aperture at 0xd0000000, size 0x8000000
> > inteldrm0 at vga1: apic 2 int 16 (irq 11)
> > drm0 at inteldrm0
> > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2
> > int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB"
> > rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2
> > "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12) ehci0 at pci0
> > dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq
> > 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root
> > hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel
> > 82801BA Hub-to-PCI" rev 0x82 pci1 at ppb0 bus 3
> > rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19
> > (irq 5), address 00:30:4f:23:15:f0 rlphy0 at rl0 phy 0: RTL internal
> > PHY rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int
> > 17 (irq 3), address 00:0b:6a:f8:3e:e3 rlphy1 at rl1 phy 0: RTL
> > internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC"
> > rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1
> > "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to
> > compatibility, channel 1 configured to compatibility wd0 at pciide0
> > channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48,
> > 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4,
> > Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at
> > atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW
> > AD-7170A, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO
> > mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 31 function 5 "Intel
> > 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97 ac97: codec
> > id 0x434d4961 (C-Media Electronics CMI9739) audio0 at auich0
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
> > lm1 at wbsio0 port 0x290/8: W83627HF
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > mtrr: Pentium Pro MTRR support
> > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech
> > USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2 uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
> > WARNING: / was not properly unmounted
> >  fine, so I suspect something is broken
> > in the way scrotwm works.
> > 
> > full dmesg follows:
> > 
> > 
> 
> 
> -- 
> With best regards,
> 	Gregory Edigarov