Paul M wrote:
quoted text
> According  to the man page (if my memory is correct), the name 
> "component1" is a placeholder used by raidctl when it is unable to 
> access the drive - in other words this component is bad. Remove the 
> drive completely and it will still list it as "component1". So 
> "component1" is not the name.
> 
> You need to use (again, if my memory is correct):
> # raidctl -v -R /dev/wd1d raid0

Paul,

Thanks for the reply. I still seem to be having trouble. Here's the 
latest status of the array:

# raidctl -v -s raid0
raid0 Components:
            /dev/wd0d: optimal
           component1: failed
No spares.
Component label for /dev/wd0d:
    Row: 0, Column: 0, Num Rows: 1, Num Columns: 2
    Version: 2, Serial Number: 100, Mod Counter: 1237272102
    Clean: No, Status: 0
    sectPerSU: 128, SUsPerPU: 1, SUsPerRU: 1
    Queue size: 100, blocksize: 512, numBlocks: 238613376
    RAID Level: 1
    Autoconfig: Yes
    Root partition: Yes
    Last configured as: raid0
component1 status is: failed.  Skipping label.
Parity status: clean
Reconstruction is 100% complete.
Parity Re-write is 100% complete.
Copyback is 100% complete.


Now, I try to reconstruct /dev/wd1d (the failed drive):

# raidctl -v -R /dev/wd1d raid0
raidctl: /dev/wd1d is not a component of this device

Still no luck. Any more ideas???

Thanks,
Jeff
--
Jeffrey C. Smith                                   Phone: 512.692.7607
RevolutionONE                                      Cell : 512.965.3898
Jeff@RevolutionONE.com