some of the Atom boards seem to need APIC; if you want to stick with

4.5 then try the GENERIC.MP kernel (bsd.mp); otherwise try a -current

snapshot (where APIC is used in GENERIC as well as GENERIC.MP).
On 2009/07/04 17:00, Hendrickson, Kenneth wrote:

quoted text
> Cannot Boot with Intel D201GLY Motherboard

>

> Disk is 120GB PATA IDE

>

> dmesg, fdisk output, and disklabel output are all attached

> OpenBSD.PDR is also attached

>

> I have Googled for problems/answers, and still run into a dead end.

>

> There must be a requirement which is not stated in the documentation,

> which I am not following.  Please help.

>

> (I am an experienced OpenBSD user, having used OpenBSD continuously

> since 1998, and having built my own kernels/userland, and also have

> built OpenBSD for embedded systems.)

>

> The instructions for booting from NTLDR (Windows 2000) do not work.

> As soon as the messages get to the CPU, the system reboots.  Booting

> never works, either from the OpenBSD partition, or from NTLDR from

> Windows 2000.  I have included my OpenBSD.PDR file for examination.

>

> Originally, my OpenBSD partition was #4 in fdisk.  I added the #1

> partition, and had both #1 and #4 set to "a6" for OpenBSD.  That

> didn't work.  I then chose only #1 partition to be "a6" for OpenBSD,

> and #4 partition was set to "da" for "No Filesystem".  That also

> didn't work.  Please note that my entire OpenBSD / filesystem is

> within the 1024 cylinder boundary.  The /boot file is totally

> contained within the 1024 cylinder boundary.  It still won't boot.

> It won't boot on its own, nor will it boot from the Windows 2000

> NTLDR bootloader.

>

> Also note that while my fdisk and disklabel indicates Linux

> partitions, none of them have yet been installed.  I installed

> Windows 2000 first, then OpenBSD.  Since I could never get OpenBSD

> to boot, I have not yet installed Linux.

>

> Please help if you can.

>

> Thank you,

> Kenneth J. Hendrickson

>

> [demime 1.01d removed an attachment of type application/octet-stream which had a name of dmesg]

>

> [demime 1.01d removed an attachment of type application/octet-stream which had a name of fdisk]

>

> [demime 1.01d removed an attachment of type application/octet-stream which had a name of disklabel]

>

> [demime 1.01d removed an attachment of type application/octet-stream which had a name of OpenBSD.PDR]