Perhaps the other side has changed their configuration in such a way

that it throws pppd off.  You'd probably get no support from them

regarding this, because it's not Windows :/
On Thu, Jul 2, 2009 at 3:47 AM, Didier Wiroth wrote:

quoted text
> Thank you for your reply.

> The strange thing is that the config files worked for a few month.

> I have no clue what's wrong ...

>

> Didier

>

> 2009/6/30 Aaron Mason :

>> Well I'm no expert in pppd, but from what I can see, it looks like

>> your system is requesting configuration information from the other

>> side, getting it, then rejecting it.  The other side acknowledges the

>> rejection, then your system sends another request, before either side

>> hangs up.

>>

>> In summary, it seems like the other side is sending config data that

>> pppd isn't configured to like.

>>

>> On Wed, Jul 1, 2009 at 2:28 AM, Didier Wiroth wrote:

>>> Here is an output of pppd debugging

>>> (if someone can help ... because this is chinese to me ;-((

>>>

>>> Jun 30 18:26:55 406334g pppd[31216]: Serial connection established.

>>> Jun 30 18:26:56 406334g pppd[31216]: Using interface ppp0

>>> Jun 30 18:26:56 406334g pppd[31216]: Connect: ppp0 <--> /dev/cuaU0

>>> Jun 30 18:26:56 406334g pppd[31216]: sent [LCP ConfReq id=0x2 >> 0x426a5360> ]

>>> Jun 30 18:26:56 406334g pppd[31216]: rcvd [LCP ConfReq id=0x2

>>>    ]

>>> Jun 30 18:26:56 406334g pppd[31216]: sent [LCP ConfRej id=0x2

>>> ]

>>> Jun 30 18:26:56 406334g pppd[31216]: rcvd [LCP ConfAck id=0x2 >> 0x426a5360> ]

>>> Jun 30 18:26:59 406334g pppd[31216]: sent [LCP ConfReq id=0x2 >> 0x426a5360> ]

>>> Jun 30 18:26:59 406334g pppd[31216]: Modem hangup

>>> Jun 30 18:26:59 406334g pppd[31216]: Connection terminated.

>>>

>>>

>>> Didier Wiroth wrote:

>>>>

>>>> STeve Andre' wrote:

>>>>>

>>>>>   I just found out that my ppp link via my T-Mobile

>>>>> phone doesn't work.  Of course I found this out while

>>>>> being outside without any other net connection.

>>>>>

>>>>>   I haven't changed anything other than compiling

>>>>> stuff.  This is a -current system on a Thinkpad W500

>>>>> compiled on June 26th.  This has worked for years.

>>>>>

>>>>>   What happens is that upon firing ppp up manually

>>>>> I get the message "Working in interactive mode" which

>>>>> I have never gotten before.  So far I haven't been able

>>>>> to do anything with it other than a ^C.  I tried an

>>>>> identical phone with my SIM; same results.

>>>>>

>>>>>   Any ideas?

>>>>>

>>>>> Thanks, STeve Andre'

>>>>>

>>>>> Dmesg, copy of ppp.conf and usbdevs output below.

>>>>>

>>>>

>>>> Hello,

>>>> Same here, I'm using a W500 too, I can't connect anymore:

>>>>

>>>> /var/log/daemon output:

>>>> Jun 30 17:15:24 406334g pppd[8832]: pppd 2.3.5 started by dda, uid 1000

>>>> Jun 30 17:15:28 406334g pppd[8832]: Serial connection established.

>>>> Jun 30 17:15:29 406334g pppd[8832]: Using interface ppp0

>>>> Jun 30 17:15:29 406334g pppd[8832]: Connect: ppp0 <--> /dev/cuaU0

>>>> Jun 30 17:15:32 406334g pppd[8832]: Modem hangup

>>>> Jun 30 17:15:32 406334g pppd[8832]: Connection terminated.

>>>>

>>>> /var/log/chat output:

>>>> Jun 30 17:15:25 406334g chat[4387]: timeout set to 120 seconds

>>>> Jun 30 17:15:25 406334g chat[4387]: abort on (BUSY)

>>>> Jun 30 17:15:25 406334g chat[4387]: abort on (ERROR)

>>>> Jun 30 17:15:25 406334g chat[4387]: abort on (NO CARRIER)

>>>> Jun 30 17:15:25 406334g chat[4387]: abort on (VOICE)

>>>> Jun 30 17:15:25 406334g chat[4387]: abort on (NO DIALTONE)

>>>> Jun 30 17:15:25 406334g chat[4387]: send (ATE1^M)

>>>> Jun 30 17:15:26 406334g chat[4387]: expect (OK)

>>>> Jun 30 17:15:26 406334g chat[4387]: ATE1^M^M

>>>> Jun 30 17:15:26 406334g chat[4387]: OK

>>>> Jun 30 17:15:26 406334g chat[4387]:  -- got it

>>>> Jun 30 17:15:26 406334g chat[4387]: send

(AT+CGDCONT=1,"IP","web.pt.lu"^M)

quoted text
>>>> Jun 30 17:15:26 406334g chat[4387]: expect (OK)

>>>> Jun 30 17:15:26 406334g chat[4387]: ^M

>>>> Jun 30 17:15:26 406334g chat[4387]: AT+CGDCONT=1,"IP","web.pt.lu"^M^M

>>>> Jun 30 17:15:26 406334g chat[4387]: OK

>>>> Jun 30 17:15:26 406334g chat[4387]:  -- got it

>>>> Jun 30 17:15:26 406334g chat[4387]: send (ATD*99***1#^M)

>>>> Jun 30 17:15:27 406334g chat[4387]: expect (CONNECT)

>>>> Jun 30 17:15:27 406334g chat[4387]: ^M

>>>> Jun 30 17:15:28 406334g chat[4387]: ATD*99***1#^M~^?}#@!}!}!}

>>>> }8}#}$@#}(}"}'}"}"}&} } } } }%}&^ZD)R^W~^M

>>>> Jun 30 17:15:28 406334g chat[4387]: CONNECT

>>>> Jun 30 17:15:28 406334g chat[4387]:  -- got it

>>>> Jun 30 17:15:28 406334g chat[4387]: send ()

>>>>

>>>> I'm using pppd with another provider LUXGSM, but I can't connect anymore

>>>> but it used to work perfectly.

>>>>

>>>> I would really appreciate some help too.

>>>>

>>>> Thanks a lot!

>>>> Didier

>>>>

>>>> Here is my dmesg, scripts and usbdevs output:

>>>>

>>>> OpenBSD 4.5-current (GENERIC.MP) #15: Thu Jun 18 09:58:42 MDT 2009

>>>>   todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP

>>>> real mem = 3174764544 (3027MB)

>>>> avail mem = 3066490880 (2924MB)

>>>> mainbus0 at root

>>>> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries)

>>>> bios0: vendor LENOVO version "6FET70WW (3.00 )" date 04/17/2009

>>>> bios0: LENOVO 406334G

>>>> acpi0 at bios0: rev 2

>>>> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT

TCPA

quoted text
>>>> SSDT SSDT SSDT

>>>> acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4)

>>>> EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3)

>>>> EHC0(S3) EHC1(S3) HDEF(S4)

>>>> acpitimer0 at acpi0: 3579545 Hz, 24 bits

>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat

>>>> cpu0 at mainbus0: apid 0 (boot processor)

>>>> cpu0: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz, 2793.36 MHz

>>>> cpu0:

>>>>

FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS

H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C

X16,xTPR,NXE,LONG

quoted text
>>>> cpu0: 6MB 64b/line 16-way L2 cache

>>>> cpu0: apic clock running at 266MHz

>>>> cpu1 at mainbus0: apid 1 (application processor)

>>>> cpu1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz, 2793.00 MHz

>>>> cpu1:

>>>>

FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS

H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C

X16,xTPR,NXE,LONG

quoted text
>>>> cpu1: 6MB 64b/line 16-way L2 cache

>>>> ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins

>>>> ioapic0: misconfigured as apic 2, remapped to apid 1

>>>> acpihpet0 at acpi0: 14318179 Hz

>>>> acpiprt0 at acpi0: bus 0 (PCI0)

>>>> acpiprt1 at acpi0: bus -1 (AGP_)

>>>> acpiprt2 at acpi0: bus 2 (EXP0)

>>>> acpiprt3 at acpi0: bus 3 (EXP1)

>>>> acpiprt4 at acpi0: bus 4 (EXP2)

>>>> acpiprt5 at acpi0: bus 5 (EXP3)

>>>> acpiprt6 at acpi0: bus 13 (EXP4)

>>>> acpiprt7 at acpi0: bus 21 (PCI1)

>>>> acpiec0 at acpi0

>>>> acpicpu0 at acpi0: C3, C2, C1, PSS

>>>> acpicpu1 at acpi0: C3, C2, C1, PSS

>>>> acpipwrres0 at acpi0: PUBS

>>>> acpitz0 at acpi0: critical temperature 127 degC

>>>> acpitz1 at acpi0: critical temperature 100 degC

>>>> acpibtn0 at acpi0: LID_

>>>> acpibtn1 at acpi0: SLPB

>>>> acpibat0 at acpi0: BAT0 model "42T4620" serial  3828 type LION oem

>>>> "Panasonic"

>>>> acpibat1 at acpi0: BAT1 not present

>>>> acpiac0 at acpi0: AC unit online

>>>> acpithinkpad0 at acpi0

>>>> acpidock0 at acpi0: GDCK not docked (0)

>>>> cpu0: Enhanced SpeedStep 2793 MHz: speeds: 2801, 2800, 2133, 1600, 800

MHz

quoted text
>>>> pci0 at mainbus0 bus 0

>>>> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07

>>>> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07

>>>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

>>>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

>>>> intagp0 at vga1

>>>> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000

>>>> inteldrm0 at vga1: apic 1 int 16 (irq 11)

>>>> drm0 at inteldrm0

>>>> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured

>>>> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured

>>>> pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA

>>>> (unsupported), channel 0 wired to native-PCI, channel 1 wired to

native-PCI

quoted text
>>>> pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt

>>>> pciide0: channel 0 ignored (not responding; disabled or no drives?)

>>>> pciide0: channel 1 ignored (not responding; disabled or no drives?)

>>>> "Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured

>>>> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1

int

quoted text
>>>> 20 (irq 11), address 00:21:86:ff:1f:5c

>>>> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int

20

quoted text
>>>> (irq 11)

>>>> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int

21

quoted text
>>>> (irq 11)

>>>> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int

22

quoted text
>>>> (irq 11)

>>>> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int

23

quoted text
>>>> (irq 11)

>>>> usb0 at ehci0: USB revision 2.0

>>>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1

>>>> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic

1

quoted text
>>>> int 17 (irq 11)

>>>> azalia0: RIRB time out

>>>> azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant

CX20561

quoted text
>>>> audio0 at azalia0

>>>> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int

20

quoted text
>>>> (irq 11)

>>>> pci1 at ppb0 bus 2

>>>> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int

21

quoted text
>>>> (irq 11)

>>>> pci2 at ppb1 bus 3

>>>> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1

int

quoted text
>>>> 17 (irq 11), MIMO 3T3R, MoW, address 00:21:6a:0d:2f:0a

>>>> ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int

22

quoted text
>>>> (irq 11)

>>>> pci3 at ppb2 bus 4

>>>> "Intel Turbo Memory" rev 0x11 at pci3 dev 0 function 0 not configured

>>>> ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int

23

quoted text
>>>> (irq 11)

>>>> pci4 at ppb3 bus 5

>>>> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int

20

quoted text
>>>> (irq 11)

>>>> pci5 at ppb4 bus 13

>>>> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int

16

quoted text
>>>> (irq 11)

>>>> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int

17

quoted text
>>>> (irq 11)

>>>> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int

18

quoted text
>>>> (irq 11)

>>>> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int

19

quoted text
>>>> (irq 11)

>>>> usb1 at ehci1: USB revision 2.0

>>>> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1

>>>> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93

>>>> pci6 at ppb5 bus 21

>>>> cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int

>>>> 16 (irq 11)

>>>> "Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured

>>>> sdhc0 at pci6 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int

>>>> 18 (irq 11)

>>>> sdmmc0 at sdhc0

>>>> "Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured

>>>> "Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not

>>>> configured

>>>> "Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured

>>>> cardslot0 at cbb0 slot 0 flags 0

>>>> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0

>>>> pcmcia0 at cardslot0

>>>> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03

>>>> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int

>>>> 16 (irq 11), AHCI 1.2

>>>> scsibus0 at ahci0: 32 targets

>>>> sd0 at scsibus0 targ 0 lun 0:  SCSI3

0/direct

quoted text
>>>> fixed

>>>> sd0: 244198MB, 512 bytes/sec, 500118192 sec total

>>>> cd0 at scsibus0 targ 1 lun 0:  ATAPI

>>>> 5/cdrom removable

>>>> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1

>>>> int 23 (irq 11)

>>>> iic0 at ichiic0

>>>> usb2 at uhci0: USB revision 1.0

>>>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>>>> usb3 at uhci1: USB revision 1.0

>>>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>>>> usb4 at uhci2: USB revision 1.0

>>>> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>>>> usb5 at uhci3: USB revision 1.0

>>>> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>>>> usb6 at uhci4: USB revision 1.0

>>>> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>>>> usb7 at uhci5: USB revision 1.0

>>>> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>>>> isa0 at pcib0

>>>> isadma0 at isa0

>>>> pckbc0 at isa0 port 0x60/5

>>>> pckbd0 at pckbc0 (kbd slot)

>>>> pckbc0: using irq 1 for kbd slot

>>>> wskbd0 at pckbd0: console keyboard, using wsdisplay0

>>>> pms0 at pckbc0 (aux slot)

>>>> pckbc0: using irq 12 for aux slot

>>>> wsmouse0 at pms0 mux 0

>>>> pcppi0 at isa0 port 0x61

>>>> midi0 at pcppi0:

>>>> spkr0 at pcppi0

>>>> aps0 at isa0 port 0x1600/31

>>>> mtrr: Pentium Pro MTRR support

>>>> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics

>>>> Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2

>>>> video0 at uvideo0

>>>> ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr

2

quoted text
>>>> ugen1 at uhub2 port 2 "Gemplus GemPC Express" rev 2.00/1.00 addr 2

>>>> softraid0 at root

>>>> root on sd0a swap on sd0b dump on sd0b

>>>>

>>>>

>>>> $ cat /etc/ppp/peers/ept

>>>> #debug

>>>> cuaU0

>>>> 460800

>>>> 0.0.0.0:10.64.64.64

>>>> netmask 255.255.255.255

>>>> ipcp-accept-local

>>>> ipcp-accept-remote

>>>> crtscts

>>>> persist

>>>> #disable stuff

>>>> deflate 0

>>>> refuse-pap

>>>> refuse-chap

>>>> noauth

>>>> noipdefault

>>>> nopcomp

>>>> novj

>>>> novjccomp

>>>> defaultroute

>>>> connect '/usr/sbin/chat -v -f /etc/ppp/peers/chat/ept.chat'

>>>>

>>>>

>>>> $ cat /etc/ppp/peers/chat/ept.chat

>>>> TIMEOUT 120

>>>> ABORT "BUSY"

>>>> ABORT "ERROR"

>>>> ABORT "NO CARRIER"

>>>> ABORT "VOICE"

>>>> ABORT "NO DIALTONE"

>>>> #enable echo

>>>> "" "ATE1"

>>>> #switch modem on

>>>> "" AT+CFUN=1

>>>> # APN

>>>> OK AT+CGDCONT=1,"IP","web.pt.lu"

>>>> # dial

>>>> OK "ATD*99***1#"

>>>> CONNECT \c

>>>>

>>>> $ usbdevs -v

>>>> Controller /dev/usb0:

>>>> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),

>>>> Intel(0x8086), rev 1.00

>>>> port 1 powered

>>>> port 2 powered

>>>> port 3 powered

>>>> port 4 powered

>>>> port 5 powered

>>>> port 6 addr 2: high speed, power 100 mA, config 1, product

0x4807(0x4807),

quoted text
>>>> Chicony Electronics Co., Ltd.(0x17ef), rev 31.34

>>>> Controller /dev/usb1:

>>>> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),

>>>> Intel(0x8086), rev 1.00

>>>> port 1 powered

>>>> port 2 powered

>>>> port 3 powered

>>>> port 4 addr 2: high speed, power 20 mA, config 1, Ericsson F3507g Mobile

>>>> Broadband Minicard Composite Device(0x1900), Ericsson(0x0bdb), rev 0.00,

>>>> iSerialNumber 3541430212806980

>>>> port 5 powered

>>>> port 6 powered

>>>> Controller /dev/usb2:

>>>> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),

>>>> Intel(0x8086), rev 1.00

>>>> port 1 powered

>>>> port 2 addr 2: full speed, power 100 mA, config 1, GemPC

Express(0x34ec),

quoted text
>>>> Gemplus(0x08e6), rev 1.00

>>>> Controller /dev/usb3:

>>>> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),

>>>> Intel(0x8086), rev 1.00

>>>> port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint

>>>> Sensor(0x2810), AuthenTec(0x08ff), rev 17.03

>>>> port 2 powered

>>>> Controller /dev/usb4:

>>>> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),

>>>> Intel(0x8086), rev 1.00

>>>> port 1 powered

>>>> port 2 powered

>>>> Controller /dev/usb5:

>>>> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),

>>>> Intel(0x8086), rev 1.00

>>>> port 1 powered

>>>> port 2 powered

>>>

>>>

>>

>>

>>

>> --

>> Aaron Mason - Programmer, open source addict

>> - Oh, why does everything I whip leave me?

>>

>

>

>

> --

> - -

> Didier Wiroth

>

--

Aaron Mason - Programmer, open source addict

- Oh, why does everything I whip leave me?