On Tue, 9 Jun 2009 01:02:43 +0200
varheit <varheit@gmx.de> wrote:

quoted text
> On Fri, 5 Jun 2009 08:21:47 -0600
> Duncan Patton a Campbell <campbell@neotext.ca> wrote:
> 
> > On Fri, 5 Jun 2009 06:54:05 -0600
> > Duncan Patton a Campbell <campbell@neotext.ca> wrote:
> > 
> > > Howdy Victor?
> > > 
> > > I appear to be having the same problems with the same card.
> > > 
> > > Do you have any news?  
> > > 
> > > Thanks,
> > > 
> > > Dhu
> > > 
> > 
> > I read somewhere to disable the radeondrm driver 
> > in kernel and this has worked so far.
> 
> Well, that might not be the best solution if it is hardware
> acceleration that you are after...
> 
> Anyway, after some more testing, I can finally start the X server
> without disabling radeondrm and without freezing the machine by
> adding
>         Option     "BusType" "PCI"
> to xorg.conf. This setting forces my AGP graphics card to PCI mode.
> 

Hmm.  Might not work 4 me as I'm actually running an actual 9200 
PCI card (HIS?), not an AGP, and there is no video on the mb.

Dhu

quoted text
> But 3D acceleration is still somewhat peculiar. Running glxgears
> yields significantly less FPS than without acceleration (that is,
> like <1 FPS with hardware acceleration and ~60 FPS without).
> 
> Strange. Blender feels faster though unless textures are displayed.
> Stellarium runs OK (= smooth) in windowed mode, but unpredictable
> in full resolution (1280x1024).
> 
> Maybe it needs some more tweaking...
> 
> Vic
> 
> 
> > > On Fri, 29 May 2009 10:33:21 +0200
> > > "Viktor Varheit" <viktorvarheit@gmx.de> wrote:
> > > 
> > > > Hi,
> > > > 
> > > > according to radeon(4) my graphics card is supported, but I
> > > > cannot get hardware acceleration to work. Booting with
> > > > "disable radeondrm" in UKC and then running "startx" works
> > > > fine. Doing the same with "enable radeondrm" (which is the
> > > > default in the GENERIC kernel) appears to freeze the machine.
> > > > The screen goes blank, and the monitor enters standby mode.
> > > > 
> > > > Sometimes the computer shuts down after pressing the power
> > > > button, but most of the time it can only be forced off by
> > > > holding the power button.
> > > > 
> > > > Trying several options in xorg.conf did not advance things.
> > > > 
> > > > I booted with a serial console to see if any messages appeared
> > > > after entering "startx". This is what I got:
> > > > 
> > > > radeondrm0: Setting GART location based on new memory map
> > > > radeondrm0: writeback test failed
> > > > radeondrm0: wait idle failed status : 0x80010140 0x00000000
> > > > radeondrm0: wait idle failed status : 0x80010140 0x00000000
> > > > radeondrm0: wait idle failed status : 0x80010140 0x00000000
> > > > ...
> > > > 
> > > > The last message is repeated over and over until the machine
> > > > appears to freeze. The time it takes to get to that point
> > > > varies.
> > > > 
> > > > After setting 'Option "AGPFastWrite" "on"' in xorg.conf
> > > > no messages were output at all, but that was the only
> > > > apparent difference.
> > > > 
> > > > Setting "AccelMethod" to "EXA" also did not change anything.
> > > > 
> > > > Using no xorg.conf at all also did not work.
> > > > 
> > > > Anyway, here's my xorg.conf and dmesg. I hope someone
> > > > can give me a hint.
> > > > 
> > > > Vic
> > > > 
> > > > 
> > > > +++ xorg.conf +++
> > > > Section "ServerLayout"
> > > > 	Identifier     "X.org Configured"
> > > > 	Screen      0  "Screen0" 0 0
> > > > 	InputDevice    "Mouse0" "CorePointer"
> > > > 	InputDevice    "Keyboard0" "CoreKeyboard"
> > > > EndSection
> > > > 
> > > > Section "Files"
> > > > 	ModulePath   "/usr/X11R6/lib/modules"
> > > > 	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
> > > > 	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
> > > > 	FontPath     "/usr/X11R6/lib/X11/fonts/OTF"
> > > > 	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
> > > > 	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
> > > > 	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
> > > > EndSection
> > > > 
> > > > Section "Module"
> > > > 	Load  "dbe"
> > > > 	Load  "dri"
> > > > 	Load  "extmod"
> > > > 	Load  "glx"
> > > > 	Load  "freetype"
> > > > EndSection
> > > > 
> > > > Section "InputDevice"
> > > > 	Identifier  "Keyboard0"
> > > > 	Driver      "kbd"
> > > > EndSection
> > > > 
> > > > Section "InputDevice"
> > > > 	Identifier  "Mouse0"
> > > > 	Driver      "mouse"
> > > > 	Option	    "Protocol" "wsmouse"
> > > > 	Option	    "Device" "/dev/wsmouse"
> > > > 	Option	    "ZAxisMapping" "4 5 6 7"
> > > > EndSection
> > > > 
> > > > Section "Monitor"
> > > > 	#DisplaySize	  340   270	# mm
> > > > 	Identifier   "Monitor0"
> > > > 	VendorName   "ENC"
> > > > 	ModelName    "L557"
> > > > 	HorizSync    24.0 - 80.0
> > > > 	VertRefresh  50.0 - 75.0
> > > > 	Option	    "DPMS"
> > > > EndSection
> > > > 
> > > > Section "Device"
> > > > 	Option     "AGPMode" "x4"
> > > >         Option     "BusType" "AGP"           	# [<str>]
> > > >         #Option     "AGPFastWrite" "on"       	# [<bool>]
> > > >         #Option     "AccelMethod" "EXA"      	# <str>
> > > >         Option     "DRI" "on"               	# [<bool>]
> > > > 	Identifier  "Card0"
> > > > 	Driver      "radeon"
> > > > 	VendorName  "ATI"
> > > > 	BoardName   "Radeon 9200 PRO"
> > > > 	BusID       "PCI:1:0:0"
> > > > EndSection
> > > > 
> > > > Section "Screen"
> > > > 	Identifier "Screen0"
> > > > 	Device     "Card0"
> > > > 	Monitor    "Monitor0"
> > > > 	SubSection "Display"
> > > > 		Viewport   0 0
> > > > 		Depth     1
> > > > 	EndSubSection
> > > > 	SubSection "Display"
> > > > 		Viewport   0 0
> > > > 		Depth     4
> > > > 	EndSubSection
> > > > 	SubSection "Display"
> > > > 		Viewport   0 0
> > > > 		Depth     8
> > > > 	EndSubSection
> > > > 	SubSection "Display"
> > > > 		Viewport   0 0
> > > > 		Depth     15
> > > > 	EndSubSection
> > > > 	SubSection "Display"
> > > > 		Viewport   0 0
> > > > 		Depth     16
> > > > 	EndSubSection
> > > > 	SubSection "Display"
> > > > 		Viewport   0 0
> > > > 		Depth     24
> > > > 	EndSubSection
> > > > EndSection
> > > > 
> > > > +++ dmesg +++
> > > > OpenBSD 4.5-stable (GENERIC) #0: Sun May  3 11:29:20 CEST 2009
> > > >     vic@overstolz.my.domain:/usr/src/sys/arch/i386/compile/GENERIC
> > > > cpu0: AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.68 GHz
> > > > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> > > > real mem  = 804810752 (767MB)
> > > > avail mem = 769404928 (733MB)
> > > > mainbus0 at root
> > > > bios0 at mainbus0: AT/286+ BIOS, date 10/18/06, BIOS32 rev. 0 @ 0xfdb10, SMBIOS rev. 2.3 @ 0xf0630 (21 entries)
> > > > bios0: vendor American Megatrends Inc. version "P2.80" date 10/18/2006
> > > > bios0: American Megatrends Inc. K7S41GX
> > > > acpi0 at bios0: rev 0
> > > > acpi0: tables DSDT FACP APIC
> > > > acpi0: wakeup devices PS2M(S4) PS2K(S4) UAR1(S4) USB1(S4) USB2(S4) EHCI(S4) LAN_(S4) MDM_(S4) AUD_(S4) PCI0(S4)
> > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > > cpu0 at mainbus0: apid 0 (boot processor)
> > > > cpu0: apic clock running at 268MHz
> > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
> > > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > > acpicpu0 at acpi0
> > > > acpibtn0 at acpi0: PWRB
> > > > bios0: ROM list: 0xc0000/0xd000 0xcd000/0xa000
> > > > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > > > pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
> > > > sisagp0 at pchb0
> > > > agp0 at sisagp0: aperture at 0xd0000000, size 0x8000000
> > > > ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
> > > > pci1 at ppb0 bus 1
> > > > vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 PRO" rev 0x01
> > > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > > > radeondrm0 at vga1: apic 2 int 16 (irq 11)
> > > > drm0 at radeondrm0
> > > > pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
> > > > pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> > > > wd0 at pciide0 channel 0 drive 0: <IBM-DTTA-350840>
> > > > wd0: 16-sector PIO, LBA, 8063MB, 16514064 sectors
> > > > wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00ETA0>
> > > > wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> > > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> > > > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
> > > > wd2 at pciide0 channel 1 drive 0: <WDC WD1600JB-22GVC0>
> > > > wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> > > > atapiscsi0 at pciide0 channel 1 drive 1
> > > > scsibus0 at atapiscsi0: 2 targets
> > > > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H55L, 1.03> ATAPI 5/cdrom removable
> > > > wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> > > > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
> > > > ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 20 (irq 5), version 1.0, legacy support
> > > > ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 21 (irq 3), version 1.0, legacy support
> > > > ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: apic 2 int 23 (irq 10)
> > > > usb0 at ehci0: USB revision 2.0
> > > > uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
> > > > sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x90: apic 2 int 19 (irq 5), address 00:19:66:65:10:93
> > > > rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
> > > > trm0 at pci0 dev 9 function 0 "Tekram DC-3x5U" rev 0x01: apic 2 int 17 (irq 5)
> > > > scsibus1 at trm0: 8 targets, initiator 7
> > > > envy0 at pci0 dev 10 function 0 "IC Ensemble Envy24 I/O Ctrlr" rev 0x02: apic 2 int 18 (irq 10)
> > > > audio0 at envy0
> > > > isa0 at pcib0
> > > > isadma0 at isa0
> > > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > > > pckbc0 at isa0 port 0x60/5
> > > > pckbd0 at pckbc0 (kbd slot)
> > > > pckbc0: using irq 1 for kbd slot
> > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > > pms0 at pckbc0 (aux slot)
> > > > pckbc0: using irq 12 for aux slot
> > > > wsmouse0 at pms0 mux 0
> > > > pcppi0 at isa0 port 0x61
> > > > midi0 at pcppi0: <PC speaker>
> > > > spkr0 at pcppi0
> > > > lpt0 at isa0 port 0x378/4 irq 7
> > > > wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
> > > > lm1 at wbsio0 port 0x290/8: W83697HF
> > > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > > > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > > > usb1 at ohci0: USB revision 1.0
> > > > uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> > > > usb2 at ohci1: USB revision 1.0
> > > > uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
> > > > mtrr: Pentium Pro MTRR support
> > > > softraid0 at root
> > > > root on wd1a swap on wd1b dump on wd1b
> > > > radeondrm0: Setting GART location based on new memory map
> > > > radeondrm0: writeback test failed
> > > > radeondrm0: wait idle failed status : 0x80010140 0x00000000
> > > > radeondrm0: wait idle failed status : 0x80010140 0x00000000
> > > > radeondrm0: wait idle failed status : 0x80010140 0x00000000
> > > > ...