Re: Dual-head OpenBSD 4.5 and NVIDIA GeForce 7300 GT

> Hi folks.
> I have 4.5 GENERIC.MP on my machine and I'd like to have it dual-head.
> My dmesg is at the bottom, if you want more information or output, I'll give that.
> I tried to setup new xorg.conf with two screens but without any luck.
> I also googled for any idea, but it also fails.
> It works on linux with modified config, but I don't want it on my machines.
> Every idea or question is welcome. Thanks.
>
> OpenBSD 4.5-beta (GENERIC.MP) #63: Tue Feb 10 07:57:12 MST 2009
> todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,
> SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
> real mem = 2146988032 (2047MB)
> avail mem = 2067771392 (1971MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 11/08/05, BIOS32 rev. 0 @ 0xfac20, SMBIOS rev. 2.3 @ 0xf0100 (39 entries)
> bios0: vendor Award Software International, Inc. version "F6" date 11/08/2005
> bios0: Gigabyte Technology Co., Ltd. 8I945GMF
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP MCFG APIC
> acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) HUB0(S5) USB0(S1) USB1(S1) USB2(S1) USB3(S1) USBE
> (S1) AC97(S5) MC97(S5) AZAL(S5) PCI0(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,
> SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (PEX0)
> acpiprt2 at acpi0: bus 3 (PEX1)
> acpiprt3 at acpi0: bus -1 (PEX2)
> acpiprt4 at acpi0: bus -1 (PEX3)
> acpiprt5 at acpi0: bus -1 (PEX4)
> acpiprt6 at acpi0: bus -1 (PEX5)
> acpiprt7 at acpi0: bus 4 (HUB0)
> acpicpu0 at acpi0
> acpicpu1 at acpi0
> acpibtn0 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0xda00
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
> ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: apic 2 int 16 (irq 12)
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7300 GT" rev 0xa1
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 int 16 (irq 12)
> azalia0: RIRB time out
> azalia0: codecs: Realtek ALC882
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 16 (irq 12)
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17 (irq 10)
> pci3 at ppb2 bus 3
> mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x19, Yukon-2 EC rev. A2 (0x1): apic 2 int 17 (irq 10)
> msk0 at mskc0 port A: address 00:14:85:e3:0f:c7
> eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 5)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18 (irq 9)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16 (irq 12)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
> pci4 at ppb3 bus 4
> "TI TSB43AB23 FireWire" rev 0x00 at pci4 dev 7 function 0 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0:
> wd0: 16-sector PIO, LBA48, 476938MB, 976771055 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19 (irq 11)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19 (irq 11)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0:
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> it0 at isa0 port 0x2e/2: IT8712F rev 7, EC port 0x290
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/43.01 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhub5 at uhub4 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 3
> uhidev1 at uhub5 port 4 configuration 1 interface 0 " USB Keyboard" rev 1.10/3.10 addr 4
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub5 port 4 configuration 1 interface 1 " USB Keyboard" rev 1.10/3.10 addr 4
> uhidev2: iclass 3/0, 2 report ids
> uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
>


linux-kernel:
Bart Van Assche	Integration of SCST in the mainstream Linux kernel
Linus Torvalds	Linux 2.6.27-rc5
Jared Hulbert	[PATCH 00/10] AXFS: Advanced XIP filesystem
Linus Torvalds	Linux 2.6.27-rc8
git:

linux-netdev:
David Miller	[GIT]: Networking
Antonio Almeida	HTB accuracy for high speed
Gerrit Renker	[PATCH 27/37] dccp: Integration of dynamic feature activation - part 2 (server side)
David Miller	Re: [PATCH] pkt_sched: Destroy gen estimators under rtnl_lock().
openbsd-misc:

Re: Dual-head OpenBSD 4.5 and NVIDIA GeForce 7300 GT

Online users