> Hi all,
>
> someone have similar problem? When I try :
>
> $ sudo setxkbmap cz
> $
>
> then my network connection stop responding and I must run :
>
> $ sudo sh /etc/netstart
>
> In Xorg.log there is same error as here
>
https://bugs.freedesktop.org/show_bug.cgi?id=21761
>
> Before this error I can see line with :
>
> mtrr set failed: Invalid argument
>
> OpenBSD 4.6-current (GENERIC.MP) #325: Sat Nov 28 18:58:05 MST 2009
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> real mem = 3707650048 (3535MB)
> avail mem = 3608199168 (3441MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 09/17/09, BIOS32 rev. 0 @
> 0xffa10, SMBIOS rev. 2.4 @ 0xf6510 (57 entries)
> bios0: vendor Dell Inc. version "A17" date 09/17/2009
> bios0: Dell Inc. Latitude E6400
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG TCPA SLIC SSDT
> acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S3) USB2(S3) USB3(S3)
> USB4(S3) USB5(S3) USB6(S3) EHC2(S3) EHCI(S3) AZAL(S3) RP01(S4)
> RP02(S4) RP03(S4) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 265MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 3 (PCIE)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 11 (RP01)
> acpiprt3 at acpi0: bus 12 (RP02)
> acpiprt4 at acpi0: bus 13 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus -1 (RP05)
> acpiprt7 at acpi0: bus -1 (RP06)
> acpiprt8 at acpi0: bus 0 (PCI0)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature 107 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "DELL MP4948B" serial 36706 type LION
> oem "Samsung SDI"
> acpibat1 at acpi0: BAT1 not present
> acpivideo0 at acpi0: VID_
> acpivout0 at acpivideo0: CRT_
> acpivout1 at acpivideo0: LCD_
> acpivout2 at acpivideo0: DVI_
> acpivout3 at acpivideo0: DVI2
> acpivout4 at acpivideo0: DP__
> acpivout5 at acpivideo0: DP2_
> acpivideo1 at acpi0: VID_
> acpivout6 at acpivideo1: CRT_
> acpivout7 at acpivideo1: LCD_
> acpivout8 at acpivideo1: DP__
> acpivout9 at acpivideo1: DP2_
> acpivout10 at acpivideo1: DVI_
> acpivout11 at acpivideo1: DVI2
> acpivideo2 at acpi0: VID2
> bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800
> cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1: apic 2 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 2
> int 22 (irq 10), address xx:xx:xx:xx:xx:xx
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2
> int 20 (irq 3)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2
> int 21 (irq 11)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2
> int 22 (irq 10)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2
> int 22 (irq 10)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03:
> apic 2 int 21 (irq 11)
> azalia0: codecs: IDT 92HD71B7, Intel/0x2802, using IDT 92HD71B7
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2
> int 16 (irq 0)
> pci1 at ppb0 bus 11
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2
> int 17 (irq 0)
> pci2 at ppb1 bus 12
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 2
> int 17 (irq 3), MIMO 1T2R, MoW, address xx:xx:xx:xx:xx:xx
> ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2
> int 18 (irq 0)
> pci3 at ppb2 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2
> int 20 (irq 3)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2
> int 21 (irq 11)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2
> int 22 (irq 10)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2
> int 20 (irq 3)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci4 at ppb3 bus 3
> cbb0 at pci4 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2
> int 19 (irq 10)
> "Ricoh 5C832 Firewire" rev 0x04 at pci4 dev 1 function 1 not configured
> sdhc0 at pci4 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2
> int 18 (irq 11)
> sdmmc0 at sdhc0
> "Ricoh 5C843 MMC" rev 0x11 at pci4 dev 1 function 3 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 19 (irq 10) for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <Hitachi HTS723280L9A362>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-U633A, D200> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic
> 2 int 17 (irq 3)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
> spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
> pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x03: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 2 int 19 (irq 10) for native-PCI interrupt
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uvideo0 at uhub0 port 6 configuration 1 interface 0
> "CN0TX5937248792101KJ Laptop_Integrated_Webcam_0.3M" rev 2.00/88.06
> addr 2
> uvideo0: video control not supported for this device.
> video0 at uvideo0
> uhub8 at uhub2 port 1 "Broadcom BCM2046B1" rev 2.00/1.00 addr 2
> ugen0 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2
> uhidev0 at uhub8 port 1 configuration 1 interface 0 "Dell product
> 0x8157" rev 2.00/1.00 addr 3
> uhidev0: iclass 3/1, 1 report id
> ukbd0 at uhidev0 reportid 1: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub8 port 2 configuration 1 interface 0 "Dell product
> 0x8158" rev 2.00/1.00 addr 4
> uhidev1: iclass 3/1, 125 report ids
> ums0 at uhidev1 reportid 2: 3 buttons
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> wskbd1: disconnecting from wsdisplay0
> wskbd1 detached
> ukbd0 detached
> uhidev0 detached
> wsmouse1 detached
> ums0 detached
> uhid0 detached
> uhidev1 detached
> uhub8 detached
>
>
> --
>
http://www.openbsd.org/lyrics.html
>
