Fred Crowson wrote:
quoted text > On 12/20/09, Kyle E <aradian@gmail.com> wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Hello list,
>>
>> I have recently installed 4.6 via PXE and FTP. The hardware is a Soekris
>> net4501. I am having a problem getting a mini-pci "Intersil Prism
>> GT/Duette" wireless card using the pgt driver to work properly. All
>> other network interfaces are working fine.
>>
>> It appears to associate to the access point (the IP is manually assigned):
>>
>> pgt0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>> lladdr 00:0c:41:18:c7:bd
>> priority: 4
>> groups: wlan egress
>> media: IEEE802.11 autoselect (OFDM24)
>> status: active
>> ieee80211: nwid XXXXXX chan 5 bssid 00:21:29:ae:56:9d nwkey <not
>> displayed> 100dBm
>> inet 192.168.1.50 netmask 0xffffff00 broadcast 192.168.1.255
>> inet6 fe80::20c:41ff:fe18:c7bd%pgt0 prefixlen 64 scopeid 0x6
>>
>> and I can see packets being transmitted on the interface with tcpdump:
>>
>> tcpdump: listening on pgt0, link-type EN10MB
>> 16:41:14.406814 arp who-has 192.168.1.1 tell 192.168.1.50
>> 16:41:15.291450 arp who-has 192.168.1.1 tell 192.168.1.50
>>
>> I can also use wireshark on another computer to see ARP queries coming
>> from the pgt0 interface, and the replies being sent back to it.
>> In any case, it seems that the pgt0 interface cannot receive any data.
>>
>> Any ideas?
>> Thanks very much for any help.
>
> How is pf configured?
>
> Fred
>
pf has the default configuration from the install:
set skip on lo
pass
block in on ! lo0 proto tcp to port 6000:6010
Just in case, I tried disabling pf anyway, but that didn't help.
