> Nothing pops out at me. Can you try booting with several things
> disabled:
> * disable softraid
> * disable acpi
> * disable apm
> * disable apm & acpi
>
> so those are 4 different tests.
>
> Thanks,
> /marco
>
> On Mon, Nov 16, 2009 at 06:34:46PM +0800, Hou Ruoyu wrote:
>> As I upgraded to #377 Nov 15 kernel snapshot, the problem recurred.
>> OpenBSD 4.6-current (GENERIC) #377: Sun Nov 15 00:38:03 MST 2009
>> (same as before)
>> biomask edc5 netmask efc5 ttymask ffff
>> vscsi0 at root
>> scsibus0 at vscsi0:256 targets
>> softraid0 at root
>> kernel: integer divide fault trap, code=0
>> Stopped at cpu_switchto+0x76 popl %ebx
>> ddb>trace
>> cpu_switchto(d0851534,d0c17800,d0a20f18,d03763c9,d0c17800) at cpu_switchto+0x76
>>
>> cfdata(d0c17800,0c17800,0,0,d15ca984) at cfdata+0x44e8
>> config_attach(0,d084a0a4,0,0,d073cf57) at config_attach+0xfd
>> config_rootfound(d073cfa0,0,d0a20fa0,d0360adf,2) at config_rootfound+0x27
>> main(0,0,0,0,0) at main+0x4b3
>>
>> Regards,
>>
>> On Sun, Nov 15, 2009 at 11:45 PM, Marco Peereboom <slash@peereboom.us> wrote:
>>> I think we fixed that in -current. ??Can you try the latest kernel?
>>>
>>> On Sun, Nov 15, 2009 at 01:12:13PM +0800, Hou, Ruoyu wrote:
>>>> Thanks for the reply. Here are return info from trace and ps:
>>>> ddb>trace
>>>> cpu_switchto(d081f394,d0be5000,d09e9f18,d035f36d,d0be5000) at cpu_switchto+0x76
>>>>
>>>> cfdata(d0be5000,d0be5000,0,d09e9f20,100) at cfdata+0x4434
>>>> config_attach(0,d0818080,0,0,d0821a38) at config_attach+0xfd
>>>> config_rootfound(d070b6f7,0,d09e9fa0,d0349ad9,2) at config_rootfound+0x27
>>>> main(0,0,0,0,0) at main+0x4af
>>>> ddb>ps
>>>> ?? ??PID ?? PPID ?? PGRP ?? UID ??S ?? ?? ?? FLAGS ??WAIT ?? ?? ?? COMMAND
>>>> ?? ?? ??8 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??2 ?? ??0x100200 ?? ?? ?? ?? ?? ?? pfpurge
>>>> ?? ?? ??7 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??2 ?? ??0x100200 ?? ?? ?? ?? ?? ?? pcic0,0,1
>>>> ?? ?? ??6 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??2 ?? ??0x100200 ?? ?? ?? ?? ?? ?? pcic0,0,0
>>>> ?? ?? ??5 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??2 ?? ??0x100200 ?? ?? ?? ?? ?? ?? apm0
>>>> ?? ?? ??4 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??2 ?? ??0x100200 ?? ?? ?? ?? ?? ?? syswq
>>>> ?? ?? ??3 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??2 ?? ??0x100200 ?? ?? ?? ?? ?? ?? idle0
>>>> ?? ?? ??2 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??2 ?? ??0x100200 ?? ?? ?? ?? ?? ?? kmthread
>>>> * ?? ??1 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??7 ?? ?? ?? ?? ?? 0 ?? ?? ?? ?? ?? ?? swapper
>>>> ?? ?? ??0 ?? ?? ??0 ?? ?? ??0 ?? ?? 0 ??3 ?? ?? 0x80200 ??wdccmd ?? ?? swapper
>>>>
>>>> My disk was partioned as follows:
>>>> 1120MB as / and set bootable
>>>> 80MB as swap
>>>> remaining 340+MB was FAT32 and mounted as /MSDOS.
>>>>
>>>> Regards,
>>>>
>>>> Marco Peereboom wrote:
>>>>> type trace please
>>>>>
>>>>> On Sun, Nov 15, 2009 at 11:55:27AM +0800, Hou, Ruoyu wrote:
>>>>>> I am trying to install OpenBSD 4.6 on a old Libretto 70CT. The installation was finished without error but stuck at rebooting.
>>>>>>
>>>>>> Since no PCMCIA-floppy or PCMCIA-CD-ROM on hand, I booted the boot cdimage file by Grub4DOS and performed net install. Reboot run into kernel fault. dmesg as follows:
>>>>>> OpenBSD 4.6 (GENERIC) #58: Thu Jul 9 21:24:42 MDT 2009
>>>>>> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>>>>>> cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 121 MHz
>>>>>> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
>>>>>> real mem = 33255424 (31MB)
>>>>>> avail mem = 21803008 (20MB)
>>>>>> mainbus0 (root)
>>>>>> bios0 at mainbus0: AT/286+ BIOS, date 02/10/99
>>>>>> apm0 at bios0: Power Management spec V1.2
>>>>>> apm0: battery life expectancy 100%
>>>>>> apm0: AC on, battery charge high, charging
>>>>>> pcibios at bios0 function 0x1a not configured
>>>>>> bios0: ROM list: 0xe4000/0xc000
>>>>>> cpu0 at mainbus0: (uniprocessor)
>>>>>> cpu0: F00F bug workaround installed
>>>>>> isa0 at mainbus0
>>>>>> isadma0 at isa0
>>>>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>>>>>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>>>>>> pckbc0 at isa0 port 0x60/5
>>>>>> pckbd0 at pckbc0 (kbd slot)
>>>>>> pckbc0: using irq 1 for kbd slot
>>>>>> wskbd0 at pckbd0: console keyboard
>>>>>> pms0 at pckbc0 (aux slot)
>>>>>> pckbc0: using irq 12 for aux slot
>>>>>> wsmouse0 at pms0 mux 0
>>>>>> vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
>>>>>> wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
>>>>>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>>>>>> wdc0 at isa0 port 0x1f0/8 irq 14
>>>>>> wd0 at wdc0 channel 0 drive 0: <IBM-DDLA-21620>
>>>>>> wd0: 16-sector PIO, LBA, 1551MB, 3177216 sectors
>>>>>> wd0(wdc0:0:0): using BIOS timings
>>>>>> sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
>>>>>> midi0 at sb0: <SB MIDI UART>
>>>>>> audio0 at sb0
>>>>>> opl0 at sb0: model OPL3
>>>>>> midi1 at opl0: <SB Yamaha OPL3>
>>>>>> wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
>>>>>> audio1 at wss0
>>>>>> pcppi0 at isa0 port 0x61
>>>>>> midi2 at pcppi0: <PC speaker>
>>>>>> spkr0 at pcppi0
>>>>>> lpt0 at isa0 port 0x378/4 irq 7
>>>>>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>>>>>> pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
>>>>>> pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
>>>>>> pcmcia0 at pcic0 controller 0 socket 0
>>>>>> ep1 at pcmcia0 function 0 "3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a"
>>>>>> port 0x340/16, irq 9: address 00:60:97:cd:e8:e7, utp/aui/bnu (default utp)
>>>>>> pcmcia1 at pcic0 controller 0 socket 1
>>>>>> pcic0: irq 11, polling enabled
>>>>>> biomask e145 netmask e345 ttymask fbdf
>>>>>> softraid0 at root
>>>>>> kernel: integer divide fault trap, code=0
>>>>>> Stopped at cpu_switchto+0x76: ?? ?? ??popl ?? ??%ebx
>>>>>> ddb>_
>>>>>>
>>>>>> While trying boot /bsd.rd succeeded:
>>>>>> OpenBSD 4.6 (GENERIC) #58: Thu Jul 9 21:24:42 MDT 2009
>>>>>> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>>>>>> cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 121 MHz
>>>>>> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
>>>>>> real mem = 33255424 (31MB)
>>>>>> avail mem = 21803008 (20MB)
>>>>>> mainbus0 (root)
>>>>>> bios0 at mainbus0: AT/286+ BIOS, date 02/10/99
>>>>>> apm0 at bios0: Power Management spec V1.2
>>>>>> apm0: battery life expectancy 100%
>>>>>> apm0: AC on, battery charge high, charging
>>>>>> pcibios at bios0 function 0x1a not configured
>>>>>> bios0: ROM list: 0xe4000/0xc000
>>>>>> cpu0 at mainbus0: (uniprocessor)
>>>>>> cpu0: F00F bug workaround installed
>>>>>> isa0 at mainbus0
>>>>>> isadma0 at isa0
>>>>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>>>>>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>>>>>> pckbc0 at isa0 port 0x60/5
>>>>>> pckbd0 at pckbc0 (kbd slot)
>>>>>> pckbc0: using irq 1 for kbd slot
>>>>>> wskbd0 at pckbd0: console keyboard
>>>>>> pms0 at pckbc0 (aux slot)
>>>>>> pckbc0: using irq 12 for aux slot
>>>>>> wsmouse0 at pms0 mux 0
>>>>>> vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
>>>>>> wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
>>>>>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>>>>>> wdc0 at isa0 port 0x1f0/8 irq 14
>>>>>> wd0 at wdc0 channel 0 drive 0: <IBM-DDLA-21620>
>>>>>> wd0: 16-sector PIO, LBA, 1551MB, 3177216 sectors
>>>>>> wd0(wdc0:0:0): using BIOS timings
>>>>>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>>>>>> pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
>>>>>> pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
>>>>>> pcmcia0 at pcic0 controller 0 socket 0
>>>>>> ep1 at pcmcia0 function 0 "3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a" port 0x340/16, irq 9: address 00:60:97:cd:e8:e7, utp/aui/bnu (default utp)
>>>>>> pcmcia1 at pcic0 controller 0 socket 1
>>>>>> pcic0: irq 5, polling enabled
>>>>>> biomask fdc5 netmask ffc5 ttymask ffff
>>>>>> softraid0 at root
>>>>>> root on rd0a swap on rd0b dump on rd0b
>>>>>> erase ^?, werase ^W, kill^U, intr ^C, status ^T
>>>>>>
>>>>>> Welcome to the OpenBSD/i386 4.6 installation program
>>>>>> (I)nstall, (U)pgrade or (S)hell?_
>>>>>>
>>>>>> Seems boot /bsd.rd skipped sound system & LPT, then assign pcic0 to irq 5 which was occupied by sound card. Then I tried disabling sound system & LPT, additionally softraid0, both in CMOS and boot_config, followed by manually assign pcic0 to irq 5. The kernel fault remained unchanged. Also, reinstallation did'nt help. I don't know what the problem is and what I could do.
>>>>>>
>>>>>> From what I've searched on internet, a similar piece of 70CT run as late as 4.0 with half of RAM(16MB) and a different PCMCIA ethernet card. Its dmesg can be found:
http://www.crowsons.com/puters/dmesg_fcm.htm, roughly the same as mine. I was wondering whether it was my misconfiguration or simply 4.6 no longer support such a vintage.
>>>>>> --
>>>>>> Hou, Ruoyu
>>>>>>
>>>>>> Laboratory of Reproductive & Stem Cell Biology,
>>>>>> College of Life Science & Biotech.,
>>>>>> Shanghai Jiao Tong University,
>>>>>> Shanghai 200240, P.R.China.
>>>>>>
>>>> --
>>>> Hou, Ruoyu
>>>>
>>>> Laboratory of Reproductive & Stem Cell Biology,
>>>> College of Life Science & Biotech.,
>>>> Shanghai Jiao Tong University,
>>>> Shanghai 200240, P.R.China.
>>
>>
>> --
>> Hou Ruoyu
>>
phoenixhou@gmail.com
>> College of Life Science & Biotech.
>> Shanghai Jiao Tong University
>> Shanghai 200240 P.R.China
>
