Stupid me, the disk is there and OpenBSD runs just fine on it. Sorry for

the noise.
On Mon, 2008-09-22 at 12:24 +0200, Stephan A. Rickauer wrote:

quoted text
> In know virtualization is not one of the primary targets of OpenBSD.

> However, in case someone is interested, here's a dmesg of 4.4-current

> booting bsd.rd on latest XenServer 5 (Express, with Intel VT). As you

> can see, there is no harddisk detected.

>

> I am ready to help testing if a developer wants to look at it.

>

> Cheers,

> Stephan

>

>

> OpenBSD 4.4-current (RAMDISK_CD) #883: Wed Sep 17 13:17:23 MDT 2008

>     todd@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD

> cpu0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class)

> 2.33 GHz

> cpu0:

> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16

> real mem  = 267976704 (255MB)

> avail mem = 252547072 (240MB)

> mainbus0 at root

> bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @ 0xfa4e0,

> SMBIOS rev. 2.4 @ 0xe901f (11 entries)

> bios0: vendor Xen version "3.2.1" date 06/23/1999

> bios0: Xen HVM domU

> apm0 at bios0: Power Management spec V1.2

> acpi at bios0 function 0x0 not configured

> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x0

> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfa780/128 (6 entries)

> pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371SB ISA" rev

> 0x00)

> pcibios0: PCI bus #0 is the last bus

> bios0: ROM list: 0xc0000/0x8c00

> cpu0 at mainbus0

> pci0 at mainbus0 bus 0: configuration mode 1 (bios)

> pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02

> pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00

> pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,

> channel 0 wired to compatibility, channel 1 wired to compatibility

> wd0 at pciide0 channel 0 drive 0:

> wd0: 16-sector PIO, LBA48, 5120MB, 10485760 sectors

> wd0(pciide0:0:0): using PIO mode 0, DMA mode 2

> atapiscsi0 at pciide0 channel 1 drive 1

> scsibus0 at atapiscsi0: 2 targets, initiator 7

> cd0 at scsibus0 targ 0 lun 0:  ATAPI 5/cdrom

> removable

> cd0(pciide0:1:1): using PIO mode 0, DMA mode 2

> "Intel 82371AB Power" rev 0x01 at pci0 dev 1 function 2 not configured

> uhci0 at pci0 dev 1 function 3 "Intel 82371SB USB" rev 0x01: irq 5

> vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00

> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

> unknown vendor 0x5853 product 0x0001 (class mass storage subclass SCSI,

> rev 0x01) at pci0 dev 3 function 0 not configured

> re0 at pci0 dev 4 function 0 "Realtek 8139" rev 0x20: RTL8139C+

> (0x7480), irq 5, address c2:37:9e:eb:1b:19

> rlphy0 at re0 phy 0: RTL internal PHY

> isa0 at pcib0

> isadma0 at isa0

> com0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo

> pckbc0 at isa0 port 0x60/5

> pckbd0 at pckbc0 (kbd slot)

> pckbc0: using irq 1 for kbd slot

> wskbd0 at pckbd0: console keyboard, using wsdisplay0

> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16

> usb0 at uhci0: USB revision 1.0

> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> biomask ffed netmask ffed ttymask ffff

> rd0: fixed, 3800 blocks

> uhidev0 at uhub0 port 2 configuration 1 interface 0 "QEMU 0.8.2 QEMU USB

> Tablet" rev 0.10/0.00 addr 2

> uhidev0: iclass 3/1

> uhid at uhidev0 not configured

> softraid0 at root

> root on rd0a swap on rd0b dump on rd0b

>

-- 

 Stephan A. Rickauer
 -----------------------------------------------------------

 Institute of Neuroinformatics         Tel  +41 44 635 30 50

 University / ETH Zurich               Sec  +41 44 635 30 52

 Winterthurerstrasse 190               Fax  +41 44 635 30 53

 CH-8057 Zurich                        Web    www.ini.uzh.ch