Machine:
Intel Quad Core Q9300 CPU
8GB RAM
ASUS P5Q Pro Mainboard (Chipset: Intel P45 / ICH10R)After the kernel halts, its impossible to use the keyboard (no numlock
or ctrl-alt-del).
I have done the best to get some of the output (photo+typing), the
pictures are from several boots, so I hope there are no confusing
hardware changes or typos.
When i disabled uhci in UKC, the "uhci*: host controller process
error" and "uhci*: host controller halted" errors disappeared, but it
still halts at "rd0: fixed, 4480 blocks"
For booting I have dd'ed floppy.fs to a usb thumb drive (emulated as
floppy), the boot process works on another computer.Thanks
Jonny HeggheimOutput/dmesg:
Bigmem = 1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.orgOpenBSD 4.4-beta (RAMDISK) #77: Wed Jul 9 16:57:41 MDI 2008
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK
real mem = 8579784704 (8182MB)
avail mem = 8332877824 (7946MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0720 (70 entries)
bios0: vendor American Megatrends Inc. version "0703" date 06/12/2008
bios0: ASUSTeK Computer INC. P5Q-PRO
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPEI OSFR SSDT
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (POP2)
acpiprt2 at acpi0: bus -1 (POP3)
acpiprt3 at acpi0: bus 4 (POP1)
acpiprt4 at acpi0: bus -1 (POP5)
acpiprt5 at acpi0: bus -1 (POP6)
acpiprt6 at acpi0: bus -1 (POP7)
acpiprt7 at acpi0: bus -1 (POP8)
acpiprt8 at acpi0: bus 2 (POP8)
acpiprt9 at acpi0: bus 3 (POP4)
cpu0 at mainbus0: (uniprocessor)
- snip -to hard to capture output :(
- snip -
ernet, rev 0xb0) at pci3 dev 0 function 0 not configured
uchi3 at pci0 at pci0 dev 29 function 0 vendor "Intel", unknow product
0x3a34 rev 0x00: irq 3
uchi4 at pci0 at pci0 dev 29 function 1 vendor "Intel", unknow product
0x3a35 rev 0x00...
Update! The machine boots fine with 2GB and 4GB RAM.
Output from loading bsd from harddrive with 8GB RAM:
- snip -
uhci5: host controller process error
uhci5: host controller halted
ehci0: unrecoverable error, controller halted
echi0: blocking intrs 0x10
uhci2: host controller process error
uhci2: host controller halted
uhci1: host controller process error
uhci1: host controller halted
uhci0: host controller process error
uhci0: host controller halted
ehci1: unrecoverable error, controller halted
echi1: blocking intrs 0x10
uhci3: host controller process error
uhci3: host controller halted
uhci4: host controller process error
uhci4: host controller halted
mtrr: Pentium Pro MTRR support
uhci_freex: xfer=0xffff8000001a5000 not busy, 0x4f4e5155
uhci_freex: xfer=0xffff80000019b200 not busy, 0x4f4e5155
uhci_freex: xfer=0xffff8000001a2800 not busy, 0x4f4e5155
uhci_freex: xfer=0xffff8000001a3e00 not busy, 0x4f4e5155
uhci_freex: xfer=0xffff8000001a3400 not busy, 0x4f4e5155
uhci_freex: xfer=0xffff8000001a4a00 not busy, 0x4f4e5155Full dmesg with 2GB RAM:
OpenBSD 4.4-beta (GENERIC) #1528: Wed Jul 16 10:01:03 MDT 2008
todd@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2133999616 (2035MB)
avail mem = 2072133632 (1976MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0720 (70 entries)
bios0: vendor American Megatrends Inc. version "0703" date 06/12/2008
bios0: ASUSTeK Computer INC. P5Q-PRO
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4)
PS2M(S4) EUSB(S4) USBE(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4)
P0P9(S4) GBEC(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4)
USB5(S4) USB6(S4) P0P4(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 5 (P0P1)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus -1 ...
On my macbook there is kinda the same problem the first time it boots.
It will eventually continue boot but it can take several minutes
before it continue. How long have you waited?BR
dunceor
Hi, waited for 30 minutes now. No response :(
Jonny Heggheim
On Fri, Jul 18, 2008 at 6:17 PM, Karl Sjodahl - dunceor
| Eric Sandeen | Re: [RFC] Heads up on sys_fallocate() |
| FUJITA Tomonori | Re: Integration of SCST in the mainstream Linux kernel |
| Anton Salikhmetov | [PATCH -v8 3/4] Enable the MS_ASYNC functionality in sys_msync() |
| Jeff Garzik | Re: [Bug #11210] libata badness |
git: | |
| Gerrit Renker | [PATCH 15/37] dccp: Set per-connection CCIDs via socket options |
| Corey Minyard | [PATCH 3/3] Convert the UDP hash lock to RCU |
| David Miller | Re: [PATCH] pkt_sched: Destroy gen estimators under rtnl_lock(). |
| Herbert Xu | Re: xfrm_state locking regression... |
