OK, thanks!
mufurcz
Marco Peereboom wrote:

quoted text
> This has been fixed in -current.

>

> On Sun, Jun 08, 2008 at 10:59:14AM +1000, mufurcz wrote:

>

>>  Hi,

>>

>> Product Name:   HP Compaq dc7700p Small Form Factor

>> ME Firmware Version: 2.1.3.1031

>>

>> After a successfull 4.3 install, followed by a halt and reboot the system

>> will panic:

>> .......

>>

>> panic: aml_die aml_setbufinit:988

>> Stopped at Debugger+0x4: leave

>> Debugger(d078aad0,d1919f90,d092c568,8,160) at Debugger+0x4

>> panic(d077e965,d077ea94,3dc,d1930c10,d1900104) at panic+0663

>> .......

>>

>> However, after a boot -c, disable acpi, diasable apm, quit will boot

>> successfully (see below), but again, after a (new) reboot, the system

>> panics again.

>>

>> As well, complaining about an incompatible ICU (Inteligent Controller Unit?)

>> vendor and product:

>>

>> ......

>>

>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe4c0/288 (16 entries)

>> pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2814

>> pcibios0: Warning, unable to fix up PCI interrupt routing

>>

>> ......

>>

>> How can I permanently disable acpi and apm in kernel?

>>

>> Who is the ICU vendor 0x8086(?) and which product is 0x2814(?)

>>

>> mufurcz

>>

>>

>>

>> Last login: Fri Jun  6 22:32:12 2008

>> OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008

>> Welcome to OpenBSD: The proactively secure Unix-like operating system.

>> Please use the sendbug(1) utility to report bugs in the system.

>> Before reporting a bug, please try to reproduce it with the latest

>> version of the code.  With bug reports, please try to ensure that

>> enough information to reproduce the problem is enclosed, and if a

>> known fix for it exists, include that as well.

>>

>> Terminal type? [vt100]

>>

>> # dmesg

>> OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008

>>   deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC

>> cpu0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz ("GenuineIntel" 686-class) 1.87

>> GHz

>> cpu0:

>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR

>> real mem  = 1047822336 (999MB)

>> avail mem = 1005096960 (958MB)

>> User Kernel Config

>>

>> UKC> enable acpi

>> 417 acpi0 already enabled

>>

>> UKC> disable acpi

>> 417 acpi0 disabled

>>

>> UKC> disable apm

>> 321 apm0 disabled

>>

>> UKC> quit

>>

>> Continuing...

>>

>> mainbus0 at root

>> bios0 at mainbus0: AT/286+ BIOS, date 04/13/07, BIOS32 rev. 0 @ 0xea0a0,

>> SMBIOS rev. 2.4 @ 0xeb960 (67 entries)

>> bios0: vendor Hewlett-Packard version "786E1 v02.10" date 04/13/2007

>> bios0: Hewlett-Packard HP Compaq dc7700p Small Form Factor

>> acpi at bios0 function 0x0 not configured

>> pcibios0 at bios0: rev 3.0 @ 0xea0a0/0x5de0

>> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe4c0/288 (16 entries)

>> pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2814

>> pcibios0: Warning, unable to fix up PCI interrupt routing

>> pcibios0: PCI bus #32 is the last bus

>> bios0: ROM list: 0xc0000/0xb000! 0xe7600/0x8a00!

>> cpu0 at mainbus0

>> cpu0: Enhanced SpeedStep disabled by BIOS

>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)

>> pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02

>> agp0 at pchb0: aperture at 0xe0000000, size 0x8000000

>> vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02

>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

>> "Intel 82Q965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured

>> pciide0 at pci0 dev 3 function 2 "Intel 82Q965 PT IDER" rev 0x02: DMA

>> (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI

>> pciide0: using irq 10 for native-PCI interrupt

>> pciide0: channel 0 ignored (not responding; disabled or no drives?)

>> pciide0: channel 1 ignored (not responding; disabled or no drives?)

>> "Intel 82Q965 KT" rev 0x02 at pci0 dev 3 function 3 not configured

>> em0 at pci0 dev 25 function 0 "Intel ICH8 IGP AMT" rev 0x02: irq 11,

>> address 00:1c:c4:71:52:01

>> uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: irq 5

>> uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: irq 5

>> ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: irq 5

>> usb0 at ehci0: USB revision 2.0

>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1

>> ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02

>> pci1 at ppb0 bus 32

>> uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: irq 5

>> uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: irq 5

>> ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: irq 5

>> usb1 at ehci1: USB revision 2.0

>> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1

>> ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2

>> pci2 at ppb1 bus 7

>> pcib0 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02

>> pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA,

>> channel 0 configured to native-PCI, channel 1 configured to native-PCI

>> pciide1: using irq 10 for native-PCI interrupt

>> wd0 at pciide1 channel 0 drive 0:

>> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors

>> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5

>> atapiscsi0 at pciide1 channel 1 drive 0

>> scsibus0 at atapiscsi0: 2 targets

>> cd0 at scsibus0 targ 0 lun 0:  SCSI0

>> 5/cdrom removable

>> cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5

>> usb2 at uhci0: USB revision 1.0

>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>> usb3 at uhci1: USB revision 1.0

>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>> usb4 at uhci2: USB revision 1.0

>> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>> usb5 at uhci3: USB revision 1.0

>> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1

>> isa0 at pcib0

>> isadma0 at isa0

>> pckbc0 at isa0 port 0x60/5

>> pckbd0 at pckbc0 (kbd slot)

>> pckbc0: using irq 1 for kbd slot

>> wskbd0 at pckbd0: console keyboard, using wsdisplay0

>> pms0 at pckbc0 (aux slot)

>> pckbc0: using irq 12 for aux slot

>> wsmouse0 at pms0 mux 0

>> pcppi0 at isa0 port 0x61

>> midi0 at pcppi0:

>> spkr0 at pcppi0

>> lpt0 at isa0 port 0x378/4 irq 7

>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16

>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

>> biomask e76d netmask ef6d ttymask ffef

>> mtrr: Pentium Pro MTRR support

>> uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech Optical USB

>> Mouse" rev 2.00/3.40 addr 2

>> uhidev0: iclass 3/1

>> ums0 at uhidev0: 3 buttons and Z dir.

>> wsmouse1 at ums0 mux 0

>> softraid0 at root

>> root on wd0a swap on wd0b dump on wd0b

>>

>> #