Here are the requested outputs.

output of `df -i`:

Filesystem  512-blocks      Used     Avail Capacity iused   ifree  %iused
Mounted on
/dev/sd0a       314480    101152    197604    34%    2189   23409     9%
/
/dev/sd0h      8264196        92   7850896     0%      20  545642     0%
/home
/dev/sd0d       251564        20    238968     0%       8   20470     0%
/tmp
/dev/sd0g     12391564   3360420   8411568    29%  193508  611994    24%
/usr
/dev/sd0e       172836     19604    144592    12%     941   13137     7%
/var
/dev/sd0i   3758267452 1935577136 1634776944    54%   25270 242482248
0%   /mnt/share

output of `disklabel /dev/sd0`:

# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: Host drive
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 243152
total sectors: 3906248704
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # microseconds
track-to-track seek: 0  # microseconds
drivedata: 0

16 partitions:
#                size           offset  fstype [fsize bsize  cpg]
 a:           321237               63  4.2BSD   2048 16384    1
 b:          4209030           321300    swap
 c:       3906248704                0  unused      0     0
 d:           257040          4530330  4.2BSD   2048 16384    1
 e:           176715          4787370  4.2BSD   2048 16384    1
 g:         12594960          4964085  4.2BSD   2048 16384    1
 h:          8401995         17559045  4.2BSD   2048 16384    1
 i:       3880275840         25961040  4.2BSD   2048 16384 38144

Thanks,
William

On Fri, May 9, 2008 at 2:44 AM, Otto Moerbeek <otto@drijf.net> wrote:
quoted text
> On Thu, May 08, 2008 at 05:18:26PM -0400, Will wrote:
>
>> I did see that, but did not realize that the 1GB limit is not a
>> user-configurable feature.
>>
>> Even so, the FAQ implies that a 2TB filesystem is possible with
>> default options, which is what I have.
>
> It might be the 2TB limit is a little too high, and the actual limit
> is lower. Can you show us your disklabel entry for /dev/sd0i and the
> output of df -i?
>
>        -Otto
>
>>
>> relevant output of df:
>>
>> Filesystem  512-blocks      Used     Avail Capacity  Mounted on
>> /dev/sd0i   3758267452 1935576944 1634777136    54%    /mnt/share
>>
>> -William
>>
>> On Thu, May 8, 2008 at 5:04 PM, David J. Stillman
>> <djstillman@ycsinet.com> wrote:
>> > Isn't this the 1GB application limit mentioned in FAQ 14.7 - " By the time
>> > one gets to a 2TB file system with default fragment and block sizes, fsck
>> > will require 1GB RAM to run, which is the application limit under OpenBSD.
>> > Larger fragments and/or blocks will reduce the number of inodes, and allow
>> > for larger file systems."?
>> >
>> > Will wrote:
>> >>
>> >> Hello all,
>> >>
>> >> I just upgraded to 4.3, and I would like to congratulate the devs on
>> >> another wonderful release! shutdown -p works and the wbng sensor
>> >> support was a nice surprise. However, the most useful feature to me
>> >> was the support for ffs2.
>> >>
>> >> I upgraded without a hitch, and repartitioned from a 1tb filesystem to
>> >> a 2tb share mount point. However, when I try to fsck the system just
>> >> to make sure everything is ok, I receive this error:
>> >>
>> >> # fsck -f /dev/sd0i
>> >> ** /dev/rsd0i
>> >> ** File system is already clean
>> >> cannot alloc 485015042 bytes for lncntp
>> >>
>> >> I just upgraded to 3gb ram, so that should be a non-issue according to the
>> >> faq.
>> >>
>> >> I have tried `ulimit -d unlimited` (as suggested previously in the
>> >> archives), but the data limit will not go above 1048576, which I
>> >> suspect to be the problem. I'm sure that there is another silly limit
>> >> I am missing somewhere.
>> >>
>> >> Thanks for any help!
>> >> -William
>> >>
>> >> Here is a dmesg of my system:
>> >>
>> >> OpenBSD 4.3 (GENERIC.MP) #1: Sat May  3 17:08:02 EDT 2008
>> >>   swilly@fptx.sc.swilly.tk:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> >> real mem = 3219636224 (3070MB)
>> >> avail mem = 3110854656 (2966MB)
>> >> mainbus0 at root
>> >> bios0 at mainbus0: SMBIOS rev. 2.51 @ 0xbfeea000 (35 entries)
>> >> bios0: vendor Phoenix Technologies LTD version "6.00" date 07/12/2006
>> >> bios0: Supermicro PDSM4+
>> >> acpi0 at bios0: rev 0
>> >> acpi0: tables DSDT FACP MCFG APIC BOOT SSDT
>> >> acpi0: wakeup devices PXHA(S5) PXHB(S5) DEV3(S5) EXP1(S5) EXP5(S5)
>> >> EXP6(S5) PCIB(S5) KBC0(S1) MSE0(S1) COM1(S5) COM2(S5) USB1(S4) USB2(S4)
>> >> USB3(S4) USB4(S4) EUSB(S4)
>> >> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> >> cpu0 at mainbus0: apid 0 (boot processor)
>> >> cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2394.32 MHz
>> >> cpu0:
>> >>
>> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
>> >> cpu0: 4MB 64b/line 16-way L2 cache
>> >> cpu0: apic clock running at 266MHz
>> >> cpu1 at mainbus0: apid 1 (application processor)
>> >> cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2394.00 MHz
>> >> cpu1:
>> >>
>> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
>> >> cpu1: 4MB 64b/line 16-way L2 cache
>> >> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
>> >> ioapic1 at mainbus0 apid 3 pa 0xfecc0000, version 20, 24 pins
>> >> ioapic2 at mainbus0 apid 4 pa 0xfecc0400, version 20, 24 pins
>> >> acpiprt0 at acpi0: bus 0 (PCI0)
>> >> acpiprt1 at acpi0: bus 2 (PXHA)
>> >> acpiprt2 at acpi0: bus 3 (PXHB)
>> >> acpiprt3 at acpi0: bus -1 (DEV3)
>> >> acpiprt4 at acpi0: bus 9 (EXP1)
>> >> acpiprt5 at acpi0: bus 13 (EXP5)
>> >> acpiprt6 at acpi0: bus 14 (EXP6)
>> >> acpiprt7 at acpi0: bus 15 (PCIB)
>> >> acpicpu0 at acpi0
>> >> acpicpu1 at acpi0
>> >> acpibtn0 at acpi0: PWRB
>> >> ipmi at mainbus0 not configured
>> >> pci0 at mainbus0 bus 0: configuration mode 1
>> >> pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
>> >> ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: apic 2 int 16
>> >> (irq 10)
>> >> pci1 at ppb0 bus 1
>> >> ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
>> >> pci2 at ppb1 bus 2
>> >> "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
>> >> ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
>> >> pci3 at ppb2 bus 3
>> >> ppb3 at pci3 dev 3 function 0 "Intel IOP331 PCIX-PCIX" rev 0x07
>> >> pci4 at ppb3 bus 4
>> >> ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev
>> >> 0x07: apic 4 int 4 (irq 10)
>> >> ami0: LSI 3008, 32b, FW 815C, BIOS vH432, 128MB RAM
>> >> ami0: 1 channels, 0 FC loops, 1 logical drives
>> >> scsibus0 at ami0: 40 targets
>> >> sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
>> >> sd0: 1907348MB, 243152 cyl, 255 head, 63 sec, 512 bytes/sec, 3906248704
>> >> sec total
>> >> scsibus1 at ami0: 16 targets
>> >> "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 3 not configured
>> >> ppb4 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int
>> >> 17 (irq 11)
>> >> pci5 at ppb4 bus 9
>> >> ppb5 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 17
>> >> (irq 11)
>> >> pci6 at ppb5 bus 13
>> >> em0 at pci6 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: apic 2
>> >> int 16 (irq 10), address 00:30:48:8b:b6:76
>> >> ppb6 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 16
>> >> (irq 10)
>> >> pci7 at ppb6 bus 14
>> >> em1 at pci7 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2
>> >> int 17 (irq 11), address 00:30:48:8b:b6:77
>> >> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int
>> >> 23 (irq 5)
>> >> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int
>> >> 19 (irq 10)
>> >> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int
>> >> 18 (irq 11)
>> >> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int
>> >> 16 (irq 10)
>> >> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int
>> >> 23 (irq 5)
>> >> usb0 at ehci0: USB revision 2.0
>> >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> >> ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
>> >> pci8 at ppb7 bus 15
>> >> vga1 at pci8 dev 4 function 0 "ATI ES1000" rev 0x02
>> >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> >> pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
>> >> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
>> >> channel 0 configured to compatibility, channel 1 configured to
>> >> compatibility
>> >> pciide0: channel 0 disabled (no drives)
>> >> pciide0: channel 1 disabled (no drives)
>> >> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2
>> >> int 19 (irq 10)
>> >> iic0 at ichiic0
>> >> lm1 at iic0 addr 0x2d: W83627HF
>> >> wbng0 at iic0 addr 0x2f: w83793g
>> >> iic0: addr 0x48 00=7f 02=4b 03=50 04=7f 06=4b 07=50 08=7f 0a=4b 0b=50
>> >> 0c=7f 0e=4b 0f=50 10=7f 12=4b 13=50 14=7f 16=4b 17=50 18=7f 1a=4b 1b=50
>> >> 1c=7f 1e=4b 1f=50 20=7f 22=4b 23=50 24=7f 26=4b 27=50 28=7f 2a=4b 2b=50
>> >> 2c=7f 2e=4b 2f=50 30=7f 32=4b 33=50 34=7f 36=4b 37=50 38=7f 3a=4b 3b=50
>> >> 3c=7f 3e=4b 3f=50 40=7f 42=4b 43=50 44=7f 46=4b 47=50 48=7f 4a=4b 4b=50
>> >> 4c=7f 4e=4b 4f=50 50=7f 52=4b 53=50 54=7f 56=4b 57=50 58=7f 5a=4b 5b=50
>> >> 5c=7f 5e=4b 5f=50 60=7f 62=4b 63=50 64=7f 66=4b 67=50 68=7f 6a=4b 6b=50
>> >> 6c=7f 6e=4b 6f=50 70=7f 72=4b 73=50 74=7f 76=4b 77=50 78=7f 7a=4b 7b=50
>> >> 7c=7f 7e=4b 7f=50 80=7f 82=4b 83=50 84=7f 86=4b 87=50 88=7f 8a=4b 8b=50
>> >> 8c=7f 8e=4b 8f=50 90=7f 92=4b 93=50 94=7f 96=4b 97=50 98=7f 9a=4b 9b=50
>> >> 9c=7f 9e=4b 9f=50 a0=7f a2=4b a3=50 a4=7f a6=4b a7=50 a8=7f aa=4b ab=50
>> >> ac=7f ae=4b af=50 b0=7f b2=4b b3=50 b4=7f b6=4b b7=50 b8=7f ba=4b bb=50
>> >> bc=7f be=4b bf=50 c0=7f c2=4b c3=50 c4=7f c6=4b c7=50 c8=7f ca=4b cb=50
>> >> cc=7f ce=4b cf=50 d0=7f d2=4b d3=50 d4=7f d6=4b d7=50 d!
>> >>
>> >>  8=7f da=4b db=50 dc=7f de=4b df=50 e0=7f e2=4b e3=50 e4=7f e6=4b e7=50
>> >> e8=7f ea=4b eb=50 ec=7f ee=4b ef=50 f0=7f f2=4b f3=50 f4=7f f6=4b f7=50
>> >> f8=7f fa=4b fb=50 fc=7f fe=4b ff=50 words 00=7f00 01=00ff 02=4b00 03=5000
>> >> 04=7f00 05=00ff 06=4b00 07=5000 08=7f00 09=00ff 0a=4b00 0b=5000 0c=7f00
>> >> 0d=00ff 0e=4b00 0f=5000
>> >> iic0: addr 0x49 00=7f 02=4b 03=50 04=7f 06=4b 07=50 08=7f 0a=4b 0b=50
>> >> 0c=7f 0e=4b 0f=50 10=7f 12=4b 13=50 14=7f 16=4b 17=50 18=7f 1a=4b 1b=50
>> >> 1c=7f 1e=4b 1f=50 20=7f 22=4b 23=50 24=7f 26=4b 27=50 28=7f 2a=4b 2b=50
>> >> 2c=7f 2e=4b 2f=50 30=7f 32=4b 33=50 34=7f 36=4b 37=50 38=7f 3a=4b 3b=50
>> >> 3c=7f 3e=4b 3f=50 40=7f 42=4b 43=50 44=7f 46=4b 47=50 48=7f 4a=4b 4b=50
>> >> 4c=7f 4e=4b 4f=50 50=7f 52=4b 53=50 54=7f 56=4b 57=50 58=7f 5a=4b 5b=50
>> >> 5c=7f 5e=4b 5f=50 60=7f 62=4b 63=50 64=7f 66=4b 67=50 68=7f 6a=4b 6b=50
>> >> 6c=7f 6e=4b 6f=50 70=7f 72=4b 73=50 74=7f 76=4b 77=50 78=7f 7a=4b 7b=50
>> >> 7c=7f 7e=4b 7f=50 80=7f 82=4b 83=50 84=7f 86=4b 87=50 88=7f 8a=4b 8b=50
>> >> 8c=7f 8e=4b 8f=50 90=7f 92=4b 93=50 94=7f 96=4b 97=50 98=7f 9a=4b 9b=50
>> >> 9c=7f 9e=4b 9f=50 a0=7f a2=4b a3=50 a4=7f a6=4b a7=50 a8=7f aa=4b ab=50
>> >> ac=7f ae=4b af=50 b0=7f b2=4b b3=50 b4=7f b6=4b b7=50 b8=7f ba=4b bb=50
>> >> bc=7f be=4b bf=50 c0=7f c2=4b c3=50 c4=7f c6=4b c7=50 c8=7f ca=4b cb=50
>> >> cc=7f ce=4b cf=50 d0=7f d2=4b d3=50 d4=7f d6=4b d7=50 d!
>> >>
>> >>  8=7f da=4b db=50 dc=7f de=4b df=50 e0=7f e2=4b e3=50 e4=7f e6=4b e7=50
>> >> e8=7f ea=4b eb=50 ec=7f ee=4b ef=50 f0=7f f2=4b f3=50 f4=7f f6=4b f7=50
>> >> f8=7f fa=4b fb=50 fc=7f fe=4b ff=50 words 00=7f00 01=00ff 02=4b00 03=5000
>> >> 04=7f00 05=00ff 06=4b00 07=5000 08=7f00 09=00ff 0a=4b00 0b=5000 0c=7f00
>> >> 0d=00ff 0e=4b00 0f=5000
>> >> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
>> >> spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM ECC PC2-5300CL5
>> >> spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
>> >> usb1 at uhci0: USB revision 1.0
>> >> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> usb2 at uhci1: USB revision 1.0
>> >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> usb3 at uhci2: USB revision 1.0
>> >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> usb4 at uhci3: USB revision 1.0
>> >> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> isa0 at pcib0
>> >> isadma0 at isa0
>> >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> >> com0: console
>> >> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> >> pckbc0 at isa0 port 0x60/5
>> >> pckbd0 at pckbc0 (kbd slot)
>> >> pckbc0: using irq 1 for kbd slot
>> >> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> >> pcppi0 at isa0 port 0x61
>> >> midi0 at pcppi0: <PC speaker>
>> >> spkr0 at pcppi0
>> >> lpt0 at isa0 port 0x378/4 irq 7
>> >> wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
>> >>  port 0x295/2 not configured
>> >> lm0 at isa0 port 0x290/8: W83627HF
>> >> lm1 detached
>> >> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> >> softraid0 at root
>> >> root on sd0a swap on sd0b dump on sd0b