cat /etc/boot.conf

-B
On Thu, May 29, 2008 at 8:44 PM, Ed Ahlsen-Girard  wrote:
> So I upgraded a rather vanilla server to 4.3 (no X, subversion and

quoted text
> Apache 2.2, since subversion doesn't like 1.x) and now there is no login

> prompt on the console.

>

> sshd works (which is why I have dmesg et al.), but I still have this

> feeling that something is missing from the whole experience.

>

> DMESG:

> OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008

>    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC

> cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 449 MHz

> cpu0:

>

> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE

> real mem  = 268009472 (255MB)

> avail mem = 251097088 (239MB)

> mainbus0 at root

> bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90,

> SMBIOS rev. 2.2 @ 0xfb410 (64 entries)

> bios0: vendor Dell Computer Corporation version "A10" date 08/01/01

> bios0: Dell Computer Corporation OptiPlex GX1 450M+

> apm0 at bios0: Power Management spec V1.2

> apm0: AC on, battery charge unknown

> acpi at bios0 function 0x0 not configured

> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000

> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/144 (7 entries)

> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA"

> rev 0x00)

> pcibios0: PCI bus #1 is the last bus

> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000

> cpu0 at mainbus0

> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)

> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03

> agp0 at pchb0: aperture at 0xf4000000, size 0x4000000

> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03

> pci1 at ppb0 bus 1

> vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c

> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

> piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02

> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,

> channel 0 wired to compatibility, channel 1 wired to compatibility

> wd0 at pciide0 channel 0 drive 0:

> wd0: 16-sector PIO, LBA, 6149MB, 12594960 sectors

> wd1 at pciide0 channel 0 drive 1:

> wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors

> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2

> wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2

> atapiscsi0 at pciide0 channel 1 drive 0

> scsibus0 at atapiscsi0: 2 targets

> cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom

> removable

> atapiscsi1 at pciide0 channel 1 drive 1

> scsibus1 at atapiscsi1: 2 targets

> sd0 at scsibus1 targ 0 lun 0:  SCSI0 0/direct

> removable

> sd0: drive offline

> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2

> sd0(pciide0:1:1): using PIO mode 0

> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11

> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMBus

> disabled

> xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11,

> address 00:c0:4f:14:cd:00

> exphy0 at xl0 phy 24: 3Com internal media interface

> isa0 at piixpcib0

> isadma0 at isa0

> pckbc0 at isa0 port 0x60/5

> pckbd0 at pckbc0 (kbd slot)

> pckbc0: using irq 1 for kbd slot

> wskbd0 at pckbd0: console keyboard, using wsdisplay0

> pmsi0 at pckbc0 (aux slot)

> pckbc0: using irq 12 for aux slot

> wsmouse0 at pmsi0 mux 0

> pcppi0 at isa0 port 0x61

> midi0 at pcppi0:

> spkr0 at pcppi0

> lpt0 at isa0 port 0x378/4 irq 7

> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16

> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo

> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2

> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec

> isapnp0 at isa0 port 0x279: read port 0x203

> wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port

> 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0)

> audio0 at wss1

> joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8

> "CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured

> "CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured

> usb0 at uhci0: USB revision 1.0

> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> biomask ef45 netmask ef45 ttymask ffc7

> mtrr: Pentium Pro MTRR support

> softraid0 at root

> root on wd1a swap on wd1b dump on wd1b

> WARNING: / was not properly unmounted

>

> Note that the warning has not persisted with reboots, but the absence of

> a prompt has.

>

> Nothing in /var/log/messages seems to indicate any problem, I can send

> that if anyone wants it.

>

> [demime 1.01d removed an attachment of type APPLICATION/DEFANGED which had

> a name of eagirard.1272DEFANGED-vcf]