On Mon, May 26, 2008 at 03:21:56PM -0700, Sean Hafeez wrote:
quoted text
> So 1st let me say I can bring up PPPoE just find with the old school
> ppp -ddial setup. There is nothing wrong with the account, etc.
> I am trying to switch over to using the hostname.pppoe0 setup. Here is
> my configuration and debug. Any help would be great!
> 
> ifconfig
> -------------
> 
> pppoe0: flags=8855<UP,DEBUG,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1492
>         dev: rl0 state: PADR sent
>         sid: 0x0 PADI retries: 5 PADR retries: 1
>         sppp: phase establish authproto pap authname "usernaem@sbcglobal.net"
>         groups: pppoe egress
>         inet6 fe80::218:4dff:fe76:9c10%pppoe0 ->  prefixlen 64 scopeid 0x5
>         inet 0.0.0.0 --> 0.0.0.1 netmask 0xffffffff
> 
> hostname.pppoe0
> ----------------------------
> # cat /etc/hostname.pppoe0
> inet 0.0.0.0 255.255.255.255 NONE \
> pppoedev rl0 authproto pap \
> authname 'username@sbcglobal.net' authkey 'passwd' debug up
> dest 0.0.0.1
> !/sbin/route add default -ifp pppoe0 0.0.0.1
> 
> debug output
> ---------------------
> pppoe0: lcp close(initial)
> pppoe0: lcp open(initial)
> pppoe0: lcp initial->starting
> pppoe0: phase establish
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0: timeout
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0: timeout
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0: timeout
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0: timeout
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0: timeout
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0 (8863) state=2, session=0x0 output -> 00:1d:6b:69:9f:ac, len=38
> pppoe0: timeout
> pppoe0 (8863) state=2, session=0x0 output -> 00:1d:6b:69:9f:ac, len=38
> pppoe0: timeout
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0 (8863) state=2, session=0x0 output -> 00:1d:6b:69:9f:ac, len=38
> pppoe0: timeout
> pppoe0 (8863) state=2, session=0x0 output -> 00:1d:6b:69:9f:ac, len=38
> pppoe0: timeout
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0 (8863) state=2, session=0x0 output -> 00:1d:6b:69:9f:ac, len=38
> pppoe0: timeout
> pppoe0 (8863) state=2, session=0x0 output -> 00:1d:6b:69:9f:ac, len=38
> pppoe0: timeout
> pppoe0 (8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18
> pppoe0 (8863) state=2, session=0x0 output -> 00:1d:6b:69:9f:ac, len=38
> pppoe0: timeout
> pppoe0 (8863) state=2, session=0x0 output -> 00:1d:6b:69:9f:ac, len=38
> pppoe0: timeout
> 
> 
> cpe log interface info
> ----------------------------------
> 001 days 22:50:20 | L3 |  Service-Name=ANY
> +001 days 22:50:20 | L3 |  AC-Cookie 1E45FA98E58873A260AAEAE3A4361552
> +001 days 22:50:35 | L3 |  AC-Name=bras36.pltnca
> +001 days 22:50:35 | L3 |  Host-Uniq 9BE40DD2
> +001 days 22:50:35 | L3 |  nt-Type: %s
> 
> 
> Any thoughts? External interface is rl0.
> 
> Thanks!
> Sean
> 
I have AT&T DSL too, it used to be SBC. here is my config that works
fine:
[root@fw ~] cat /etc/hostname.pppoe0                                           
inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev sis1 \
      authproto pap authname xxxx@sbcglobal.net authkey xxxxxxxx up
!/sbin/route add default 0.0.0.1