> Sorry, I've the same problem. I don't understand if there is a way to have
> OpenBSD 4.2 amd64 running on Dell PowerEdge 1950 with Perc 6 raid controller
> ?
>
> Thanks
>
>
>
> Marco Peereboom wrote:
> >
> > dlg@ is working on a fix. If I get my hands on one I might beat him to
> > it :-)
> >
> > On Mon, Jan 28, 2008 at 03:14:03PM +0100, J.W. Zondag wrote:
> >> Below dmesg:
> >>
> >> OpenBSD 4.2-current (RAMDISK_CD) #612: Tue Jan 22 17:56:50 MST 2008
> >> pvalchev@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> >> cpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz ("GenuineIntel" 686-class)
> >> 2.83 GHz
> >> cpu0:
> >> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> >> real mem = 1068400640 (1018MB)
> >> avail mem = 1027047424 (979MB)
> >> mainbus0 at root
> >> bios0 at mainbus0: AT/286+ BIOS, date 10/27/07, BIOS32 rev. 0 @
> >> 0xffe90, SMBIOS rev. 2.4 @ 0x3fb9c000 (64 entries)
> >> bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007
> >> bios0: Dell Inc. PowerEdge 1950
> >> acpi0 at bios0: rev 2, can't enable ACPI
> >> bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00
> >> 0xcc000/0x5e00 0xec000/0x4000!
> >> cpu0 at mainbus0
> >> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> >> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
> >> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
> >> pci1 at ppb0 bus 4
> >> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> >> pci2 at ppb1 bus 5
> >> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> >> pci3 at ppb2 bus 6
> >> ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> >> pci4 at ppb3 bus 7
> >> bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
> >> ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
> >> pci5 at ppb4 bus 8
> >> ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
> >> pci6 at ppb5 bus 9
> >> ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
> >> pci7 at ppb6 bus 1
> >> mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04, Dell
> >> PERC 6/i integrated: irq 5
> >> mfi0: firmware stuck in state 0
> >> mfi0: can't attachppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev
> >> 0x12
> >> pci8 at ppb7 bus 10
> >> bge0 at pci8 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
> >> (0x4201): irq 5, address 00:10:18:31:68:d0
> >> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> >> ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
> >> pci9 at ppb8 bus 11
> >> ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12
> >> pci10 at ppb9 bus 12
> >> ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
> >> pci11 at ppb10 bus 13
> >> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
> >> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
> >> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
> >> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
> >> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
> >> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
> >> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
> >> ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
> >> pci12 at ppb11 bus 2
> >> ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> >> pci13 at ppb12 bus 3
> >> bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 5
> >> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11
> >> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10
> >> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11
> >> uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
> >> ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11
> >> usb0 at ehci0: USB revision 2.0
> >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >> ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
> >> pci14 at ppb13 bus 14
> >> vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
> >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
> >> disabled
> >> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
> >> channel 0 configured to compatibility, channel 1 configured to
> >> compatibility
> >> atapiscsi0 at pciide0 channel 0 drive 0
> >> scsibus0 at atapiscsi0: 2 targets
> >> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR-T10N, 1.02> SCSI0
> >> 5/cdrom removable
> >> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> >> pciide0: channel 1 ignored (disabled)
> >> usb1 at uhci0: USB revision 1.0
> >> -snip-
> >>
> >> 2008/1/25, Marco Peereboom <slash@peereboom.us>:
> >> > I added the pci ids but it obviously didn't work. Can you send me the
> >> > dmesg?
> >> >
> >> > On Fri, Jan 25, 2008 at 12:18:36AM +0100, J.W. Zondag wrote:
> >> > > Hi,
> >> > >
> >> > > Just got this machine from Dell.
> >> > > Tried to install OpenBSD 4.2-current (23-01-2008) but it dit not
> >> > > recognize the raid1 disk.
> >> > > Any idea when Perc 6i will be added?
> >> > >
> >> > > ---
> >> > > Thanks
> >> > > JW
> >
> >
> >
>
> --
> View this message in context:
http://www.nabble.com/Dell-PE1950-III---Perc-6i-tp15077666p15741360.html
> Sent from the openbsd user - misc mailing list archive at Nabble.com.
