All my network infrastructure is -current from last week :-)
4.3 is starting to shape up and if you do the math you can see that we

will start working towards release in a couple of weeks ;-)
On Fri, Feb 01, 2008 at 09:17:26AM +0000, Richard Wilson wrote:

quoted text
> Reza Muhammad wrote:

> > Great, thanks for the info.  This is my first time to get a rackmount server, and I just wanna make sure

> > it is supported by OpenBSD ;)

> >

> > As "Juan Miscaro" described on Wed, Jan 30, 2008 at 02:48:19PM -0500:

> >

> >> --- Reza Muhammad  wrote:

> >>

> >>

> >>> Hi all,

> >>>

> >>> I'm looking to buy a server that supports OpenBSD and I'm looking at

> >>> either Dell PowerEdge 1950 III

> >>> or Dell PowerEdge R200.  I noticed Marco (marco@)'s message about

> >>> Dell PERC 6i that exists on

> >>> PowerEdge 1950 III and R2000. But, if I'm not going to use RAID and

> >>> only use Serial ATA hard drive, would I be

> >>> able to install OpenBSD on it?

> >>>

> >> I just did a test install of a new PowerEdge R200 [1].  4.2 Release

> >> would not install on it.  I achieved an install only with a very recent

> >> snapshot (28-01-08).  So far, everything is working.  I do not have any

> >> RAID card but one that can be purchased with the R200, the LSI/SAS5iR,

> >> is listed as supported by mpi [2] on the i386 page.

> >>

> I just received delivery of a new R200 for use as a router.

> Unfortunately, this also fails to install 4.2 release. However, I can

> report that the latest snapshot works fine. (Where fine equals it

> installs OK and I can ssh to it) I suspect I'm going to have to re-think

> though, as I'm not sure I want to follow -current on a core router :-/

>

> On the other hand, many people, especially the developers, seem to run

> -current in production. Thus I put it to those who know: Running

> -current on a core router: Sensible way to keep up with the latest

> security fixes, or really dumb idea to run pre-release code on something

> you want to be truly solid?

>

> Si1entDave

>

>

> PS: Dmesg for those interested:

>

> OpenBSD 4.2-current (GENERIC) #1337: Mon Jan 28 14:32:02 MST 2008

>     pvalchev@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC

> real mem = 2145722368 (2046MB)

> avail mem = 2072276992 (1976MB)

> mainbus0 at root

> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7ff9c000 (46 entries)

> bios0: vendor Dell Inc. version "1.0.0" date 10/24/2007

> bios0: Dell Inc. PowerEdge R200

> acpi0 at bios0: rev 2

> acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT

> EINJ SSDT SSDT SSDT

> acpi0: wakeup devices PCI0(S5)

> acpitimer0 at acpi0: 3579545 Hz, 24 bits

> acpihpet0 at acpi0: 14318179 Hz

> acpiprt0 at acpi0: bus 0 (PCI0)

> acpiprt1 at acpi0: bus 1 (PEX1)

> acpiprt2 at acpi0: bus 2 (SBE0)

> acpiprt3 at acpi0: bus 3 (SBE4)

> acpiprt4 at acpi0: bus 4 (SBE5)

> acpiprt5 at acpi0: bus 5 (COMP)

> acpicpu0 at acpi0: FVS, 2333, 2000 MHz

> ipmi at mainbus0 not configured

> cpu0 at mainbus0: (uniprocessor)

> cpu0: Intel(R) Xeon(R) CPU 3065 @ 2.33GHz, 2333.76 MHz

> cpu0:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG

> cpu0: 4MB 64b/line 16-way L2 cache

> pci0 at mainbus0 bus 0: configuration mode 1

> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x29f0

> rev 0x01

> ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x29f1 rev

> 0x01: irq 15

> pci1 at ppb0 bus 1

> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: irq 15

> pci2 at ppb1 bus 2

> ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02

> pci3 at ppb2 bus 3

> bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1

> (0x4201): irq 15, address 00:19:b9:fa:01:cf

> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

> ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02

> pci4 at ppb3 bus 4

> bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1

> (0x4201): irq 14, address 00:19:b9:fa:01:d0

> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

> uhci0 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 11

> uhci1 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 10

> uhci2 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 11

> ehci0 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 11

> usb0 at ehci0: USB revision 2.0

> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1

> ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x92

> pci5 at ppb4 bus 5

> vga1 at pci5 dev 5 function 0 "ATI ES1000" rev 0x02

> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

> pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02

> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,

> channel 0 configured to native-PCI, channel 1 configured to native-PCI

> pciide0: using irq 6 for native-PCI interrupt

> wd0 at pciide0 channel 0 drive 0:

> wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors

> atapiscsi0 at pciide0 channel 0 drive 1

> scsibus0 at atapiscsi0: 2 targets

> cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom

> removable

> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5

> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2

> usb1 at uhci0: USB revision 1.0

> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> usb2 at uhci1: USB revision 1.0

> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> usb3 at uhci2: USB revision 1.0

> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1

> isa0 at pcib0

> isadma0 at isa0

> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

> pckbc0 at isa0 port 0x60/5

> pckbd0 at pckbc0 (kbd slot)

> pckbc0: using irq 1 for kbd slot

> wskbd0 at pckbd0: console keyboard, using wsdisplay0

> pcppi0 at isa0 port 0x61

> midi0 at pcppi0:

> spkr0 at pcppi0

> uhub4 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2

> uhidev0 at uhub4 port 1 configuration 1 interface 0 "CHICONY HP Basic

> USB Keyboard" rev 1.10/3.00 addr 3

> uhidev0: iclass 3/1

> ukbd0 at uhidev0: 8 modifier keys, 6 key codes

> wskbd1 at ukbd0 mux 1

> wskbd1: connecting to wsdisplay0

> softraid0 at root

> root on wd0a swap on wd0b dump on wd0b