On 27/09/2007, at 8:06 PM, Stephan A. Rickauer wrote:
> A new server shippped by a local vendor fails to boot bsd.mp, with

quoted text
> and without acpi enabled (amd64, 4.2). Without acpi it will reboot

> directly after mounting the root device. With acpi enabled it will

> hang with "arc0: unable to query firmware for sensor info".

> Uniprocessor kernels would boot fine, both acpi and without. Pls.

> find dmesgs of those as well as more info below.

I'm pretty sure that message from arc is a result of interrupts not

being hooked up correctly.
also, arc doesnt hang after printing that message, it gives control

back to the rest of the kernel. presumably the kernel is hanging

while waiting for io on the disk to work, but of course, the disk is

on arc and interrupts arent wired up to it correctly so just blocks.
dlg
>

quoted text
> # cat 4.2-bsd-noacpi.dmesg

> OpenBSD 4.2 (GENERIC) #0: Thu Sep 27 12:10:25 CEST 2007

>       root@celeborn.lan.ini.uzh.ch:/usr/src/sys/arch/amd64/compile/

> GENERIC

> real mem = 3757588480 (3583MB)

> avail mem = 3636060160 (3467MB)

> mainbus0 at root

> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x99c00 (84 entries)

> bios0: vendor American Megatrends Inc. version "WTF2V028" date

> 01/24/2007

> acpi at mainbus0 not configured

> ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1

> cpu0 at mainbus0: (uniprocessor)

> cpu0: Dual-Core AMD Opteron(tm) Processor 2212, 2000.24 MHz

> cpu0:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> pci0 at mainbus0 bus 0: configuration mode 1

> "NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured

> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3

> nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2

> iic0 at nviic0: disabled to avoid ipmi0 interactions

> iic1 at nviic0: disabled to avoid ipmi0 interactions

> ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq

> 9, version 1.0, legacy support

> ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 11

> usb0 at ehci0: USB revision 2.0

> uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1

> pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2:

> DMA, channel 0 configured to compatibility, channel 1 configured to

> compatibility

> atapiscsi0 at pciide0 channel 0 drive 1

> scsibus0 at atapiscsi0: 2 targets

> cd0 at scsibus0 targ 0 lun 0:

> SCSI0 5/cdrom removable

> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2

> pciide0: channel 1 disabled (no drives)

> pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA

> pciide1: using irq 11 for native-PCI interrupt

> pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA

> pciide2: using irq 10 for native-PCI interrupt

> ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2

> pci1 at ppb0 bus 7

> vga1 at pci1 dev 6 function 0 "XGI Technology Volari Z7" rev 0x00

> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

> "TI TSB43AB22 FireWire" rev 0x00 at pci1 dev 7 function 0 not

> configured

> ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci2 at ppb1 bus 6

> ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci3 at ppb2 bus 5

> bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750

> B1 (0x4101): irq 7, address 00:d0:68:12:0b:71

> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

> ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci4 at ppb3 bus 4

> bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750

> B1 (0x4101): irq 5, address 00:d0:68:12:0b:70

> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

> ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci5 at ppb4 bus 1

> ppb5 at pci5 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00

> pci6 at ppb5 bus 3

> arc0 at pci6 dev 14 function 0 "Areca ARC-1210" rev 0x00: irq 7

> arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17

> scsibus1 at arc0: 16 targets

> sd0 at scsibus1 targ 0 lun 0:  SCSI3

> 0/direct fixed

> sd0: 152587MB, 54253 cyl, 12 head, 480 sec, 512 bytes/sec,

> 312499712 sec total

> ppb6 at pci5 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00

> pci7 at ppb6 bus 2

> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00

> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00

> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00

> pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00

> pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00

> pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

> pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00

> isa0 at pcib0

> isadma0 at isa0

> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo

> pckbc0 at isa0 port 0x60/5

> pckbd0 at pckbc0 (kbd slot)

> pckbc0: using irq 1 for kbd slot

> wskbd0 at pckbd0: console keyboard, using wsdisplay0

> pcppi0 at isa0 port 0x61

> midi0 at pcppi0:

> spkr0 at pcppi0

> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2

> usb1 at ohci0: USB revision 1.0

> uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1

> dkcsum: sd0 matches BIOS drive 0x80

> root on sd0a swap on sd0b dump on sd0b

>

>

> # cat 4.2-bsd-acpi.dmesg

> OpenBSD 4.2 (GENERIC) #0: Thu Sep 27 12:10:25 CEST 2007

>       root@celeborn.lan.ini.uzh.ch:/usr/src/sys/arch/amd64/compile/

> GENERIC

> real mem = 3757588480 (3583MB)

> avail mem = 3636060160 (3467MB)

> User Kernel Config

> UKC> enable acou\^H \^H\^H \^Hpi

> 263 acpi0 enabled

> UKC> exit

> Continuing...

> mainbus0 at root

> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x99c00 (84 entries)

> bios0: vendor American Megatrends Inc. version "WTF2V028" date

> 01/24/2007

> acpi0 at mainbus0: rev 2

> acpi0: tables DSDT FACP APIC OEMB SRAT

> acpitimer at acpi0 not configured

> acpiprt0 at acpi0: bus 0 (PCI0)

> acpiprt1 at acpi0: bus 7 (P0P1)

> acpiprt2 at acpi0: bus 0 (PCIB)

> acpiprt3 at acpi0: bus 0 (POGA)

> acpiprt4 at acpi0: bus 0 (POGB)

> acpicpu at acpi0 not configured

> acpicpu at acpi0 not configured

> acpicpu at acpi0 not configured

> acpicpu at acpi0 not configured

> acpibtn at acpi0 not configured

> ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1

> cpu0 at mainbus0: (uniprocessor)

> cpu0: Dual-Core AMD Opteron(tm) Processor 2212, 2000.26 MHz

> cpu0:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> pci0 at mainbus0 bus 0: configuration mode 1

> "NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured

> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3

> nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2

> iic0 at nviic0: disabled to avoid ipmi0 interactions

> iic1 at nviic0: disabled to avoid ipmi0 interactions

> ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq

> 5, version 1.0, legacy support

> ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 5

> usb0 at ehci0: USB revision 2.0

> uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1

> pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2:

> DMA, channel 0 configured to compatibility, channel 1 configured to

> compatibility

> atapiscsi0 at pciide0 channel 0 drive 1

> scsibus0 at atapiscsi0: 2 targets

> cd0 at scsibus0 targ 0 lun 0:

> SCSI0 5/cdrom removable

> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2

> pciide0: channel 1 disabled (no drives)

> pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA

> pciide1: using irq 11 for native-PCI interrupt

> pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA

> pciide2: using irq 7 for native-PCI interrupt

> ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2

> pci1 at ppb0 bus 7

> vga1 at pci1 dev 6 function 0 "XGI Technology Volari Z7" rev 0x00

> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

> "TI TSB43AB22 FireWire" rev 0x00 at pci1 dev 7 function 0 not

> configured

> ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci2 at ppb1 bus 6

> ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci3 at ppb2 bus 5

> bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750

> B1 (0x4101): irq 7, address 00:d0:68:12:0b:71

> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

> ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci4 at ppb3 bus 4

> bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750

> B1 (0x4101): irq 5, address 00:d0:68:12:0b:70

> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

> ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci5 at ppb4 bus 1

> ppb5 at pci5 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00

> pci6 at ppb5 bus 3

> arc0 at pci6 dev 14 function 0 "Areca ARC-1210" rev 0x00: irq 7

> arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17

> scsibus1 at arc0: 16 targets

> sd0 at scsibus1 targ 0 lun 0:  SCSI3

> 0/direct fixed

> sd0: 152587MB, 54253 cyl, 12 head, 480 sec, 512 bytes/sec,

> 312499712 sec total

> ppb6 at pci5 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00

> pci7 at ppb6 bus 2

> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00

> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00

> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00

> pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00

> pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00

> pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

> pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00

> isa0 at pcib0

> isadma0 at isa0

> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo

> pckbc0 at isa0 port 0x60/5

> pckbd0 at pckbc0 (kbd slot)

> pckbc0: using irq 1 for kbd slot

> wskbd0 at pckbd0: console keyboard, using wsdisplay0

> pcppi0 at isa0 port 0x61

> midi0 at pcppi0:

> spkr0 at pcppi0

> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2

> usb1 at ohci0: USB revision 1.0

> uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1

> dkcsum: sd0 matches BIOS drive 0x80

> root on sd0a swap on sd0b dump on sd0b

>

>

>

> I also followed Kenneth's suggestion [1] and recompiled an mp

> kernel with fully enabled acpi. But that would not change anything.

> A further look into the BIOS reveales scary APCI options, playing

> around with them without having a clue didn't help either. What I

> didn't do so far is to try a -current kernel, simply because I

> don't know whether that improves the scenario at all. May be worth

> a try if someone knows of heavy changes in the acpi sector.

>

> Here's the dmesg of the failing bsd.mp, 4.2 with acpi:

>

>

> OpenBSD 4.2 (GENERIC.MP) #1: Thu Sep 27 12:59:32 CEST 2007

>     root@celeborn.lan.ini.uzh.ch:/usr/src/sys/arch/amd64/compile/

> GENERIC.MP

> real mem = 3757588480 (3583MB)

> avail mem = 3635908608 (3467MB)

> mainbus0 at root

> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x99c00 (84 entries)

> bios0: vendor American Megatrends Inc. version "WTF2V028" date

> 01/24/2007

> acpi0 at mainbus0: rev 0

> acpi0: tables DSDT FACP APIC OEMB SRAT

> acpitimer0 at acpi0: 3579545 Hz, 24 bits

> acpi device at acpi0 from table DSDT not configured

> acpi device at acpi0 from table FACP not configured

> acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat

> cpu0 at mainbus0: apid 0 (boot processor)

> cpu0: Dual-Core AMD Opteron(tm) Processor 2212, 2000.23 MHz

> cpu0:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu0: apic clock running at 200MHz

> cpu1 at mainbus0: apid 1 (application processor)

> cpu1: Dual-Core AMD Opteron(tm) Processor 2212, 2000.00 MHz

> cpu1:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu2 at mainbus0: apid 2 (application processor)

> cpu2: Dual-Core AMD Opteron(tm) Processor 2212, 2000.00 MHz

> cpu2:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu3 at mainbus0: apid 3 (application processor)

> cpu3: Dual-Core AMD Opteron(tm) Processor 2212, 2000.00 MHz

> cpu3:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 11, 24 pins

> acpimadt0: unknown apic structure type ff

> acpimadt0: unknown apic structure type ff

> acpimadt0: unknown apic structure type ff

> acpi device at acpi0 from table OEMB not configured

> acpi device at acpi0 from table SRAT not configured

> acpiprt0 at acpi0: bus 0 (PCI0)

> acpiprt1 at acpi0: bus 7 (P0P1)

> acpiprt2 at acpi0: bus 0 (PCIB)

> acpiprt3 at acpi0: bus 0 (POGA)

> acpiprt3: no apic found for irq 73

> acpiprt3: no apic found for irq 74

> acpiprt3: no apic found for irq 75

> acpiprt3: no apic found for irq 72

> acpiprt3: no apic found for irq 75

> acpiprt4 at acpi0: bus 0 (POGB)

> acpiprt4: no apic found for irq 80

> acpiprt4: no apic found for irq 81

> acpiprt4: no apic found for irq 82

> acpiprt4: no apic found for irq 79

> acpiprt4: no apic found for irq 81

> acpiprt4: no apic found for irq 82

> acpiprt4: no apic found for irq 79

> acpiprt4: no apic found for irq 80

> acpiprt4: no apic found for irq 82

> acpiprt4: no apic found for irq 79

> acpiprt4: no apic found for irq 80

> acpiprt4: no apic found for irq 81

> acpicpu0 at acpi0

> acpicpu1 at acpi0

> acpicpu2 at acpi0

> acpicpu3 at acpi0

> acpibtn0 at acpi0: PWRB

> ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1

> pci0 at mainbus0 bus 0: configuration mode 1

> "NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured

> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3

> nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2

> iic0 at nviic0: disabled to avoid ipmi0 interactions

> iic1 at nviic0: disabled to avoid ipmi0 interactions

> pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2:

> DMA, channel 0 configured to compatibility, channel 1 configured to

> compatibility

> atapiscsi0 at pciide0 channel 0 drive 1

> scsibus0 at atapiscsi0: 2 targets

> cd0 at scsibus0 targ 0 lun 0:

> SCSI0 5/cdrom removable

> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2

> pciide0: channel 1 disabled (no drives)

> pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA

> pciide1: using apic 4 int 15 (irq 11) for native-PCI interrupt

> pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA

> pciide2: using apic 4 int 15 (irq 10) for native-PCI interrupt

> ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2

> pci1 at ppb0 bus 7

> vga1 at pci1 dev 6 function 0 "XGI Technology Volari Z7" rev 0x00

> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

> ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci2 at ppb1 bus 6

> ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci3 at ppb2 bus 5

> bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750

> B1 (0x4101): apic 4 int 5 (irq 5), address 00:d0:68:12:0b:71

> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

> ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci4 at ppb3 bus 4

> bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750

> B1 (0x4101): apic 4 int 15 (irq 7), address 00:d0:68:12:0b:70

> brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0

> ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci5 at ppb4 bus 1

> ppb5 at pci5 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00

> pci6 at ppb5 bus 3

> arc0 at pci6 dev 14 function 0 "Areca ARC-1210" rev 0x00: apic 4

> int 15 (irq 5)

> arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17

> scsibus1 at arc0: 16 targets

> sd0 at scsibus1 targ 0 lun 0:  SCSI3

> 0/direct fixed

> sd0: 152587MB, 54253 cyl, 12 head, 480 sec, 512 bytes/sec,

> 312499712 sec total

> ppb6 at pci5 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00

> pci7 at ppb6 bus 2

> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00

> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00

> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00

> pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00

> pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00

> pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

> pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00

> isa0 at pcib0

> isadma0 at isa0

> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

> com0: console

> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo

> pckbc0 at isa0 port 0x60/5

> pckbd0 at pckbc0 (kbd slot)

> pckbc0: using irq 1 for kbd slot

> wskbd0 at pckbd0: console keyboard, using wsdisplay0

> pcppi0 at isa0 port 0x61

> midi0 at pcppi0:

> spkr0 at pcppi0

> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2

> arc0: unable to query firmware for sensor info

>

>

> Any help, of course, is greatly appreciated. The server is not

> productive yet, so I can help providing all data that may be

> required. SSH login is also possible. Thanks!

>

>

> [1] http://marc.info/?l=openbsd-misc&m=118148605315920&w=2

>

> --

>

>    Stephan A. Rickauer

>

>    -----------------------------------------------------------

>    Institute of Neuroinformatics         Tel  +41 44 635 30 50

>    University / ETH Zurich               Sec  +41 44 635 30 52

>    Winterthurerstrasse 190               Fax  +41 44 635 30 53

>    CH-8057 Zurich                        Web  www.ini.unizh.ch

>

>    RSA public key:  https://www.ini.uzh.ch/~stephan/pubkey.asc

>    -----------------------------------------------------------