hi everyone
a new toy at house :)
a pc engines 2b2 (two lan, two usb, two mini pci..500 mhz)
http://www.pcengines.ch/alix2b2.htm

OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem  = 268009472 (255MB)
avail mem = 251506688 (239MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/01/07, BIOS32 rev. 0 @ 0xfcc1a
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 12 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 15, address 00:0d:b9:12:50:bc
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
vr1 at pci0 dev 13 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:0d:b9:12:50:bc
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
pcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TRANSCEND>
wd0: 1-sector PIO, LBA, 495MB, 1014048 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
"AMD CS5536 Audio" rev 0x01 at pci0 dev 15 function 3 not configured
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 9, version 1.0, legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 9
usb0 at ehci0: ...
[ message continues ]

hi
i give a test on the alix with openssl speed, (see below)
i have no time to test with iperf, but a scp/sftp gimme
1.4MO/s for sending a file, and 3.3 MO/s for receiving one
the performance if the same with pf (pass in quick and pass out quick) and no pf.
a test with less overhead protocol must be better.

OpenSSL 0.9.7j 04 May 2006
built on: date not available
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx) 
compiler: information not available
available timing options: USE_TOD HZ=100 [sysconf value]
timing function used: getrusage
The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
md2                241.70k      521.53k      725.90k      813.13k      836.69k
mdc2                 0.00         0.00         0.00         0.00         0.00 
md4               1717.66k     6184.30k    18138.97k    35437.91k    48629.41k
md5               1523.14k     5475.53k    16318.13k    32470.44k    45382.15k
hmac(md5)         2130.63k     7323.63k    20092.91k    36169.01k    46399.49k
sha1              1403.40k     4361.82k    10298.88k    15529.66k    18337.83k
rmd160            1285.34k     3857.88k     8769.70k    12646.58k    14544.24k
rc4              22900.92k    28689.09k    30642.33k    31106.63k    31084.15k
des cbc           4860.02k     5343.06k     5517.98k     5510.81k     5526.13k
des ede3          2023.42k     2089.24k     2121.90k     2125.82k     2118.88k
idea cbc             0.00         0.00         0.00         0.00         0.00 
rc2 cbc           2595.76k     2749.94k     2801.83k     2810.20k     2815.32k
rc5-32/12 cbc        0.00         0.00         0.00         0.00         0.00 
blowfish cbc      6981.63k     8212.96k     8622.68k     8685.05k     8734.50k
cast cbc          6352.73k     7322.71k     7674.79k     7739.37k     7802.72k
aes-128 cbc       5871.72k     6205.27k     6328.14k     6366.70k     6367.72k
aes-192 cbc       5121.31k     ...
[ message continues ]