Le 12 sept. 07 ` 23:42, Daniel Ouellet a icrit :
> Here is the new dmesg for current.

quoted text
>

> So far the boot process is much faster and do not hang anymore.

>

> I am doing install on three more boxes now and will do a bunch of

> reboot cycles to see the end results.

>

> Still some acpi not configure in the dmesg, but so far does look

> better.

Those devices (acpicpu, acpibtn...) are not compiled in GENERIC or

GENERIC.MP, if you want to test them

you must compile your own kernel.
>

quoted text
> Also, note this is on the latest bios and ilom as well as the

> latest SAS drivers as well. Not the one that comes directly from Sun.

>

> ILOM: 1.1.8

> BIOS: 39, not the standard 34 version.

> SAS: 1.16.40, not the 1.16.00

>

> More later.

>

> Daniel

>

> ==========================================================

>

> OpenBSD 4.2-current (GENERIC.MP) #1384: Tue Sep 11 22:09:44 MDT 2007

>     deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/

> GENERIC.MP

> real mem = 3757625344 (3583MB)

> avail mem = 3635904512 (3467MB)

> User Kernel Config

> UKC> enable acpi

> 270 acpi0 enabled

> UKC> exit

> Continuing...

> mainbus0 at root

> bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfbd50 (70 entries)

> bios0: vendor American Megatrends Inc. version "0ABJX039" date

> 04/11/2007

> bios0: Sun Microsystems Sun Fire X4100 M2

> acpi0 at mainbus0: rev 2

> acpi0: tables DSDT FACP APIC SPCR SLIT OEMB HPET IPET SRAT SSDT

> acpitimer at acpi0 not configured

> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat

> cpu0 at mainbus0: apid 0 (boot processor)

> cpu0: Dual-Core AMD Opteron(tm) Processor 2216, 2393.94 MHz

> cpu0:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu0: apic clock running at 199MHz

> cpu1 at mainbus0: apid 1 (application processor)

> cpu1: Dual-Core AMD Opteron(tm) Processor 2216, 2393.64 MHz

> cpu1:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu2 at mainbus0: apid 2 (application processor)

> cpu2: Dual-Core AMD Opteron(tm) Processor 2216, 2393.64 MHz

> cpu2:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu3 at mainbus0: apid 3 (application processor)

> cpu3: Dual-Core AMD Opteron(tm) Processor 2216, 2393.64 MHz

> cpu3:

> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3

> 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,

> 3DNOW2,3DNOW

> cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB

> 64b/line 16-way L2 cache

> cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully

> associative

> ioapic0 at mainbus0 apid 15 pa 0xfec00000, version 11, 24 pins

> ioapic1 at mainbus0 apid 16 pa 0xfeafd000, version 11, 7 pins

> ioapic1: misconfigured as apic 0, can't remap to apid 16

> ioapic2 at mainbus0 apid 17 pa 0xfeafc000, version 11, 7 pins

> ioapic2: misconfigured as apic 1, can't remap to apid 17

> ioapic3 at mainbus0 apid 14 pa 0xfeaff000, version 11, 24 pins

> acpiprt0 at acpi0: bus 0 (PCI0)

> acpiprt1 at acpi0: bus 1 (P0P1)

> acpiprt2 at acpi0: bus 4 (P0P4)

> acpiprt3 at acpi0: bus 5 (P0P5)

> acpiprt4 at acpi0: bus 128 (PCIB)

> acpiprt5 at acpi0: bus 133 (POGA)

> acpiprt6 at acpi0: bus 134 (POGB)

> acpiprt7 at acpi0: bus 131 (BR5D)

> acpiprt8 at acpi0: bus 132 (BR5E)

> acpiprt9 at acpi0: bus 255 (PCIC)

> acpiprt10 at acpi0: bus -1 (POGA)

> acpiprt11 at acpi0: bus -1 (POGB)

> acpicpu at acpi0 not configured

> acpicpu at acpi0 not configured

> acpicpu at acpi0 not configured

> acpicpu at acpi0 not configured

> acpibtn at acpi0 not configured

> ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca4/2 spacing 1

> pci0 at mainbus0 bus 0: configuration mode 1

> "NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured

> pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3

> nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2

> iic0 at nviic0: disabled to avoid ipmi0 interactions

> iic1 at nviic0: disabled to avoid ipmi0 interactions

> ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic

> 15 int 11 (irq 11), version 1.0, legacy support

> ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic

> 15 int 5 (irq 5)

> usb0 at ehci0: USB revision 2.0

> uhub0 at usb0: "NVIDIA EHCI root hub", rev 2.00/1.00, addr 1

> pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2:

> DMA, channel 0 configured to compatibility, channel 1 configured to

> compatibility

> atapiscsi0 at pciide0 channel 0 drive 0

> scsibus0 at atapiscsi0: 2 targets

> cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/

> cdrom removable

> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2

> pciide0: channel 1 ignored (disabled)

> ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2

> pci1 at ppb0 bus 1

> vga1 at pci1 dev 3 function 0 "ATI Rage XL" rev 0x27

> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)

> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

> nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 15

> int 15 (irq 15), address 00:14:4f:7d:a6:de

> eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2

> ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci2 at ppb1 bus 2

> ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci3 at ppb2 bus 3

> ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci4 at ppb3 bus 4

> ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci5 at ppb4 bus 5

> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00

> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00

> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00

> pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev

> 0x00pci6 at pchb4 bus 128

> "NVIDIA nForce4 DDR" rev 0xa3 at pci6 dev 0 function 0 not configured

> "NVIDIA CK804" rev 0xa3 at pci6 dev 1 function 0 not configured

> nfe1 at pci6 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 15

> int 15 (irq 7), address 00:14:4f:7d:a6:df

> eephy1 at nfe1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2

> ppb5 at pci6 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci7 at ppb5 bus 129

> ppb6 at pci6 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci8 at ppb6 bus 130

> ppb7 at pci6 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci9 at ppb7 bus 131

> ppb8 at pci6 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3

> pci10 at ppb8 bus 132

> ppb9 at pci6 dev 16 function 0 "AMD 8132 PCIX" rev 0x12

> pci11 at ppb9 bus 133

> "AMD 8132 PCIX IOAPIC" rev 0x12 at pci6 dev 16 function 1 not

> configured

> ppb10 at pci6 dev 17 function 0 "AMD 8132 PCIX" rev 0x12

> pci12 at ppb10 bus 134

> em0 at pci12 dev 1 function 0 "Intel PRO/1000MT (82546EB)" rev

> 0x03: apic 17 int 0 (irq 10), address 00:14:4f:7d:a6:e0

> em1 at pci12 dev 1 function 1 "Intel PRO/1000MT (82546EB)" rev

> 0x03: apic 17 int 1 (irq 6), address 00:14:4f:7d:a6:e1

> mpi0 at pci12 dev 2 function 0 "Symbios Logic SAS1064" rev 0x02:

> apic 17 int 2 (irq 7)

> scsibus1 at mpi0: 108 targets

> sd0 at scsibus1 targ 2 lun 0:

> SCSI2 0/direct fixed

> sd0: 69618MB, 69618 cyl, 16 head, 128 sec, 512 bytes/sec, 142577664

> sec total

> "AMD 8132 PCIX IOAPIC" rev 0x12 at pci6 dev 17 function 1 not

> configured

>

> pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00

> pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

> pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00

> isa0 at pcib0

> isadma0 at isa0

> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

> pckbc0 at isa0 port 0x60/5

> pckbd0 at pckbc0 (kbd slot)

> pckbc0: using irq 1 for kbd slot

> wskbd0 at pckbd0: console keyboard, using wsdisplay0

> pcppi0 at isa0 port 0x61

> midi0 at pcppi0:

> spkr0 at pcppi0

> usb1 at ohci0: USB revision 1.0

> uhub1 at usb1: "NVIDIA OHCI root hub", rev 1.00/1.00, addr 1

> uhidev0 at uhub1 port 3 configuration 1 interface 0

> uhidev0: "American Megatrends Inc. Virtual Keyboard and Mouse", rev

> 1.10/1.00, addr 2, iclass 3/1

> ukbd0 at uhidev0: 8 modifier keys, 6 key codes

> wskbd1 at ukbd0 mux 1

> wskbd1: connecting to wsdisplay0

> uhidev1 at uhub1 port 3 configuration 1 interface 1

> uhidev1: "American Megatrends Inc. Virtual Keyboard and Mouse", rev

> 1.10/1.00, addr 2, iclass 3/1

> ums0 at uhidev1

> ums0: X report 0x0002 not supported

> umass0 at uhub1 port 4 configuration 1 interface 0

> umass0: "American Megatrends Inc. Virtual Cdrom Device", rev

> 1.10/1.00, addr 3

> umass0: using ATAPI over Bulk-Only

> scsibus2 at umass0: 2 targets

> cd1 at scsibus2 targ 1 lun 0:  SCSI0 5/

> cdrom removable

> umass1 at uhub1 port 5 configuration 1 interface 0

> umass1: "American Megatrends Inc. Virtual Floppy Device", rev

> 1.10/1.00, addr 4

> umass1: using UFI over CBI with CCI

> scsibus3 at umass1: 2 targets

> sd1 at scsibus3 targ 1 lun 0:  SCSI0 0/

> direct removable

> sd1: drive offline

> dkcsum: sd0 matches BIOS drive 0x80

> root on sd0a swap on sd0b dump on sd0b