> Now let's wait for Damien Bergamini The Great to have some time to
> finish the support of the wireless 4965AGN chip in wpi(4)
>
> I'll have to investigate a bit more about the sound issue... no sound
> until now...
>
> And now, for the record, a dmesg for GENERIC.MP@lenovo x61s:
>
> (yes, I am using an apple USB keyboard, the only hardware I like from apple)
>
> ----------
> OpenBSD 4.2 (GENERIC.MP) #251: Thu Aug 23 10:55:57 MDT 2007
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel"
> 686-class) 1.60 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> real mem = 1046761472 (998MB)
> avail mem = 1004421120 (957MB)
> User Kernel Config
> UKC> enable acpi
> 398 acpi0 enabled
> UKC> quit
> Continuing...
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/23/07, BIOS32 rev. 0 @
> 0xfdc80, SMBIOS rev. 2.4 @ 0xe0010 (63 entries)
> bios0: vendor LENOVO version "7NET21WW (1.02 )" date 04/23/2007
> bios0: LENOVO 766636G
> pcibios0 at bios0: rev 3.0 @ 0xfdc10/0x3f0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde80/304 (17 entries)
> pcibios0: bad IRQ table checksum
> pcibios0: PCI BIOS has 17 Interrupt Routing table entries
> pcibios0: no compatible PCI ICU found
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #6 is the last bus
> bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xe0000/0x10000!
> acpi0 at mainbus0: rev 2
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF!
> SSDT SSDT SSDT SSDT
> acpitimer at acpi0 not configured
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 199 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz ("GenuineIntel"
> 686-class) 1.60 GHz
> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: duplicate apic id, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 0 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus 0 (EXP2)
> acpiprt5 at acpi0: bus 0 (EXP3)
> acpiprt6 at acpi0: bus 0 (EXP4)
> acpiprt7 at acpi0: bus 5 (PCI1)
> acpiec at acpi0 not configured
> acpicpu at acpi0 not configured
> acpicpu at acpi0 not configured
> acpitz at acpi0 not configured
> acpitz at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibtn at acpi0 not configured
> acpibat at acpi0 not configured
> acpibat at acpi0 not configured
> acpibat at acpi0 not configured
> acpiac at acpi0 not configured
> acpidock at acpi0 not configured
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x0615092206000922
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1800 MHz (1244 mV): speeds: 1800, 1200 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82965GM MCH" rev 0x0c
> vga1 at pci0 dev 2 function 0 "Intel 82965GM Video" rev 0x0c: aperture
> at 0xe0000000, size 0x8000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82965GM Video" rev 0x0c at pci0 dev 2 function 1 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 2
> int 20 (irq 11), address 00:16:d3:3e:4d:38
> uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 2
> int 20 (irq 11)
> uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 2
> int 21 (irq 11)
> ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 2
> int 22 (irq 11)
> ehci0: timed out waiting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03:
> apic 2 int 17 (irq 11)
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Analog Devices/0x1984 (rev. 4.0), HDA version 1.0
> azalia0: codec: Conexant/0x2bfa (rev. 0.0), HDA version 0.9
> azalia0: codec[1]: No support for modem function groups
> azalia0: codec[1]: No audio function groups
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03
> pci2 at ppb1 bus 3
> "Intel Wireless WiFi Link 4965AGN" rev 0x61 at pci2 dev 0 function 0
> not configured
> uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 2
> int 16 (irq 10)
> uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 2
> int 17 (irq 11)
> ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 2
> int 19 (irq 11)
> ehci1: timed out waiting for BIOS
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1: Intel EHCI root hub, rev 2.00/1.00, addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
> pci3 at ppb2 bus 5
> cbb0 at pci3 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2
> int 16 (irq 10)
> "Ricoh 5C832 Firewire" rev 0x04 at pci3 dev 0 function 1 not configured
> sdhc0 at pci3 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2
> int 18 (irq 11)
> sdmmc0 at sdhc0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x2811 rev 0x03
> pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: apic 2
> int 16 (irq 10), AHCI 1.1
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS54161, SB4I> SCSI2 0/direct fixed
> sd0: 152627MB, 19457 cyl, 255 head, 63 sec, 512 bytes/sec, 312581808 sec total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic
> 2 int 23 (irq 11)
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5: Intel UHCI root hub, rev 1.00/1.00, addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> ugen0 at uhub2 port 1uhub6 at uhub4 port 1
> ugen0: Broadcom Corp BCM2045B, rev 2.00/1.00, addr 2
> : Mitsumi Electric Hub in Apple Extended USB Keyboard, rev 1.10/4.10, addr 2
> uhidev0 at uhub6 port 2 configuration 1 interface 0
> uhidev0: Dell product 0x3010, rev 2.00/2.20, addr 3, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> ugen1 at uhub2 port 2
> ugen1: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 3
> uhidev1 at uhub6 port 3 configuration 1 interface 0
> uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
> addr 4, iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes, country code 13
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub6 port 3 configuration 1 interface 1
> uhidev2: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
> addr 4, iclass 3/0
> uhidev2: 3 report ids
> uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a swap on sd0b dump on sd0b
> ---------------------
>
> > fwiw, my r60 has always been a lot more pleasant with bsd.mp after
> > 'enable acpi'. As in,
> >
> > 1) at the boot prompt type boot bsd.mp -c
> > 2) at the prompt type enable acpi
> >
> > if that works better, use the config -e magic per the faq
> >
> > hope this helps you along a bit
> >
> > Cheers,
> > --
> > Peter N. M. Hansteen, member of the first RFC 1149 implementation team
> >
http://bsdly.blogspot.com/ http://www.datadok.no/ http://www.nuug.no/
> > "Remember to set the evil bit on all malicious network traffic"
> > delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
