> I have a soekris 4801 that I am trying to reinstall. It boots an older
> -current just fine, but I need to replace the drive as well. When I
> pxeboot 4.1-release, or the latest snapshot, I get the same error.
> Dmesg (via script) included.
>
>
> POST: 0123456789bcefghipajklnoq,,,tvwxy
> comBIOS ver. 1.24 20040312 Copyright (C) 2000-2004 Soekris
> Engineering.
>
> net4801
>
> CPU Geode 266 Mhz 0000 Mbyte
> Memory 0128
>
> Pri Mas GS-Magicstor 1022C LBA Xlt 520-128-63 2097 Mbyte
>
> PXE-M00: BootManage UNDI, PXE-2.0 (build 082)
>
> Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
> -------------------------------------------------------------------
> 0:00:0 1078 0001 06000000 0107 0280 00 00 00 00000000 00000000 00
> 0:06:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0000000 10
> 0:07:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0001000 10
> 0:08:0 100B 0020 02000000 0107 0290 00 3F 00 0000E301 A0002000 10
> 0:18:2 100B 0502 01018001 0005 0280 00 00 00 00000000 00000000 00
> 0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 00000000 11
>
>
> comBIOS Monitor. Press ? for help.
>
> > boot F0
>
> BootManage UNDI, PXE-2.0 (build 082)
> BootManage PXE-2.0 PROM 1.0, NATSEC 1.0, SDK 3.0/082 (OEM52)
> Copyright (C) 1989,2000 bootix Technology GmbH, D-41466 Neuss.
> PXE Software Copyright (C) 1997, 1998, 1999, 2000 Intel Corporation.
> Licensed to National Semiconductor
>
> CLIENT MAC ADDR: 00 00 24 C2 4A 24.
> DHCP. CLIENT IP: 209.204.157.106 MASK: 255.255.255.240 DHCP IP:
> 209.204.157.98
> GATEWAY IP: 209.204.157.98
> TFTP.
> TFTP.|probing: pc0 com0 com1 pci pxe![2.1] mem[639K 127M a20=on]
> disk: hd0+
> net: mac 00:00:24:c2:4a:24, ip 209.204.157.106, server 209.204.157.98
> >> OpenBSD/i386 PXEBOOT 1.12
> switching console to com0
> >> OpenBSD/i386 PXEBOOT 1.12
>
> com0: 9600 baud
> booting tftp:bsd.rd: | 4704852+742904 [52+173344+158814]=0x583374
> entry point at 0x200120J
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2007 OpenBSD. All rights reserved.
>
http://www.OpenBSD.org
>
> OpenBSD 4.1-current (RAMDISK_CD) #314: Fri May 4 02:51:50 MDT 2007
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
> 586-class) 267 MHz
> cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
> cpu0: TSC disabled
> real mem = 133787648 (130652K)
> avail mem = 115912704 (113196K)
> using 1663 buffers containing 6811648 bytes (6652K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 20/40/12, BIOS32 rev. 0 @ 0xf7840
> pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
> pcibios0: pcibios_get_intr_routing - function not supported
> pcibios0: PCI IRQ Routing information unavailable.
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc8000/0xa000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
> sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
> irq 10, address 00:00:24:c2:4a:24
> nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
> sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
> irq 10, address 00:00:24:c2:4a:25
> nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
> sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
> irq 10, address 00:00:24:c2:4a:26
> nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
> gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
> "NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
> pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <GS-Magicstor 1022C 23080803>
> wd0: 16-sector PIO, LBA, 2047MB, 4194126 sectors
> wd0(pciide0:0:0): using PIO mode 3
> geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6
> revision 3 wdstatus 0
> ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 11,
> version 1.0, legacy support
> isa0 at gscpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> biomask fbe5 netmask ffe5 ttymask ffe7
> rd0: fixed, 3800 blocks
> dkcsum: wd0 matches BIOS drive 0x80
> PXE boot MAC address 00:00:24:c2:4a:24, interface sis0
> uvm_fault(0xd0697240, 0x0, 0, 1) -> e
> fatal page fault (6) in supervisor mode
> trap type 6 code 0 eip d02b2321 cs d02f0008 eflags 10246 cr2 30 cpl 0
> panic: trap type 6, code=0, pc=d02b2321
> syncing disks... done
> rebooting...
>
>
