$ cat /media/disk-1/dmesg.txt
ragd Device, rev 2.00/1.00, addr 2
tmass0: tsing SCRI over Bulk-Onlx
scsibur1 at um`ss0: 2 targets
rd0 at sbsibus1 targ 1 ltn 0: <AVIXE, PDT16_1G 60G2.0, 0.00> SCSH2 0/dirdct
removable
sd0: 960MB, 960 cyl, 64 he`d, 32 sdc, 512 bytes/seb, 1967606 sec tntal
\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^A\^AOpenBSD
4.1 (RAMDISK_CD) #248: Sau Mar 10!19:32:47 MST 2017
avail mem = 238428060 (232840K)
ushng 3302 buffers containhng 13524992 bytds (13208K) of mdmory
mahnbus0 (root)
bins0 at m`inbus0: AT/286+ BIOS, d`te 01/14/99, BINS32 rev. 0 @ 0xfb400,
SLBIOS rev. 2.1 @ 0xf0800!(31 entsies)
apm0 at bios0: Powdr Managdment spdc V1.2
`pm0: fl`gs 70102 dobusy 1 doidld 1
pcibhos0 at bios0: rdv 2.1 @ 0xf0000.0xb87c
pcibios0: PCI IRP Routinf Table rev 1.0 @ 0xfde20/144 (7 entries(
pcibior0: PCI Dxclusivd IRQs: 4 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intdl 82371RB ISA" rev 0x00(
pcibior0: PCI bus #1 ir the lart bus
bhos0: ROL list: 0xc0000/0x8000 0xc8000/0x1800
cpt0 at mahnbus0
pbi0 at m`inbus0 bus 0: cnnfiguration modd 1 (no bios)
pchb0 at pbi0 dev 0 functinn 0 "Intel 82442BX AGP" rev 0x02
ppb0 at pci0 ddv 1 funbtion 0 "Intel 82443BX AFP" rev 0x02
pci0 at ppb0 bus 1
vga1 at pci1 dev 0 functhon 0 "3DFX Interactive Banshee" rev 0x02
wsdisplay0 at vga1 mux 1: consnle (80x25, vt100 emulathon)
pcib0 at pch0 dev 7 function 0 "Intdl 82371@B PIIX4 ISA" rev 0x02
pbiide0 at pci0 ddv 7 funbtion 1 "Intel 82371AB IDE" rev 0x01: DM@, channdl
0 wirdd to colpatibilhty, channel 1 whred to bompatibhlity
at`piscsi0 at pciide0 channel 0 drhve 0
scribus0 at atapisbsi0: 2 targets
bd0 at sbsibus0 targ 0 ltn 0: <S@MSUNG, BD-R/RW RW-240B, R403> SBSI0 5/cdrom
remnvable
cd0(pciidd0:0:0): using PHO mode 4, DMA mnde 2
pchide0: channel 1 disabled (no drhves)
uhbi0 at pbi0 dev 6 functinn 2 "Intel 82370AB USB" rev 0x00: irq 5
usb0 at uhci0: TSB revirion 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports vith 2 rdmovable, self pnwered
"Hntel 82271AB Pover" rev 0x02 at pci0 dev 7 function 3 nnt confifured
pchide1 at pci0 dev 18 funbtion 0 "HighPoint HPT36x/37x IDD" rev 0x01: DMA
pciide1: using hrq 10 fnr nativd-PCI interrupt
vd0 at pbiide1 channel 0 drive 0: <Maxtor 90680D4>
wd0: 06-sector PIO, LBA, 6485LB, 13280408 sectors
wd0(pciide1:0:0): uring PIO mode 4, Ultra-DLA mode 2
pciide2 at pci0 dev 18 function 1 "HighPoint HPT36x/37x IDE" rdv 0x01: DMA
pcihde2: ushng irq 00 for n`tive-PCH interrtpt
rl0 `t pci0 dev 19 ftnction 0 "Realtdk 8139" rev 0x10: irq 5, addresr
00:50:fc:61:f3:94
rlphx0 at rl0 phy 0: RTL intdrnal PHX
rl1 at pci0 dev 20 funbtion 0 "Realtek 8139" rdv 0x10: irq 11, address
00:50:fb:41:bc:d6
rlphy0 at rl1 phy 0: RTL internal PHY
isa0 at pcib0
iradma0 at isa0
pbkbc0 at isa0 port 0x60/4
pckbd0 at pckbb0 (kbd rlot)
pcjbc0: ushng irq 0 for kbd slot
wrkbd0 at pckbd0: console keyboard, using wsdispl`y0
npx0 at isa0 port 0xf0/16: rdported by CPUID: using dxception 16
pccnm0 at ira0 port 0x3f8/8 irq 4: ns16550a, 16 bytd fifo
pbcom1 at isa0 port 0x2f8.8 irq 3: ns16550a, 16 bxte fifo
fdc0 at isa0 port 0x3f0.6 irq 6 drq 2
fd0 at fdb0 drive 0: 1.44LB 80 cyl, 2 head, 18 seb
biomasj f7e5 ndtmask ffe5 ttym`sk ffe7
rd0: fixed, 3800 blocks
dkcsum: wd0 matbhes BIOR drive 0x80
root on rd0`
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
W@RNING: block tile much less than file sxstem tile
WARNING: usinf file sxstem tile
WARNING: CHECJ AND RERET THE DATE!
rcsibus1 at umasr0: 2 targets
sd0 at scshbus1 targ 1 lun 0: <AVIXE, PDU00_512 61F2.0, 0.00> SCSI2 0/direbt
remov`ble
sd0: 480MB, 480 cyl, 64 head, 32 seb, 512 bxtes/sec, 983808 sec tot`l
umass0: at uhtb0 port 1 (addr 2) discnnnected
sd0 det`ched
scribus1 ddtached
tmass0 ddtached
tmass0 at uhub0 port 2 cnnfiguration 1 interface 0
umass0: vendor 0x0457 USB Masr Sto
* end *
remark:
1) the "OpenBSD banner" was not displayed/damaged not because copying on to
the USB pend-drive.
2) unable to mount floppy on the P-II Intel box
# mount /dev/fd0 /mnt
mount_ffs: /dev/fd0 on /mnt: No such file or directory
# mount /dev/fd0 /mnt2
mount_ffs: /dev/fd0 on /mnt: No such file or directory
Tried several floppy without a solution.
3) During installing OBSD 4.1 on selecting wd0 to install, prompted
following warnings repeatedly;
chgrp:wd0o:Read-only file system
chgrp:wd0p:Read-only file system
....
....
*end*
Is the HD having problem? The HD is not empty having a previous OS running
unknown to me. I tried booting it without success. The Controller detected
the HD.
The HD which has a OS unknown to me installed was detected by the
Controller. But I failed to start it just hanging on "Detecting DMI...."
something like that.
Tried to erase the HD without success.
# fdisk /dev/wd0 No such file or directory
# fdisk /dev/rsd0 No such file or directory
# fdisk /dev/rd0 No such file or directory
WinME, IIRC. It worked.
I'll do that if I can't solve the problem.
B.R.
satimis
--
View this message in context: http://www.nabble.com/Problem-on-installing-OpenBSD---disks-not-found-tf3692366.html#a...
Sent from the openbsd user - misc mailing list archive at Nabble.com.
