On Thu, Apr 26, 2007 at 12:23:58PM +0200, Raimo Niskanen wrote:
quoted text
> Hi all!
> 
> I have a HP ProLiant DL140 G3 coming in soon, that I really would
> like to run OpenBSD 4.1 on. Its predecessor runs OpenBSD (sparc).
> If I do not succeed it will wind up running SLES 10 and that is
> a pity.
> 
> I have used a snapshot of OpenBSD amd64 from April 24.
> 
> HP ProLiant DL 140 G2 works like a charm with OpenBSD 4.0.
> 
> The problems:
> 
> 1) something with keyboard interrupts. When booting with a
>    PS2 or USB keyboard attached BIOS, CDBOOT and boot(8) works
>    fine, but the kernel gets no keyboard. using
>    boot> boot cd0a:/4.1/amd64/bsd.rd -c gives an
>    UKC> promt but does not respond to keystrokes.
>    
>    First changing the console using
>    boot> set tty com0
>    and then 
>    boot> boot cd0a:/4.1/amd64/bsd.rd -c 
>    gives a serial console that is usable. The dmsg is attached
> 
> 2) something with internal USB devices. The axe(4) driver 
>    mistakes something in the server for an USB network card
>    and fails to configure it. Therefore the disabling of
>    the axe device in the following dmsg output. I can live
>    without an axe device so this is not a big problem.
> 
> At the end of the dmsg there is something concerning keyboard
> interrupts. What can I do about it?
> 
> -- 
> 
> / Raimo Niskanen, Erlang/OTP, Ericsson AB
> 
> [demime 1.01d removed an attachment of type application/octet-stream]

And here comes the dmsg:

quoted text
>> OpenBSD/amd64 CDBOOT 1.08
boot> boot cd0a:/4.1/amd64/bsd.rd -c
booting cd0a:/4.1/amd64/bsd.rd: 2186912+443055+2277312+0+331664 [80+224880+13881
8]=0x958f94
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 9880aCopyright (c) 1982, 
1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.1-current (RAMDISK_CD) #1091: Tue Apr 24 04:34:18 MDT 2007
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2146086912 (2095788K)
avail mem = 1835941888 (1792912K)
using 22937 buffers containing 214814720 bytes (209780K) of memory
User Kernel Config
UKC> help
command   args                description
add       dev                 add a device
base      8|10|16             base on large numbers
change    devno|dev           change devices
disable   attr val|devno|dev  disable devices
enable    attr val|devno|dev  enable devices
exit                          leave UKC
find      devno|dev           find devices
help                          this message
list                          list configuration
lines     [count]             number of lines before more
quit                          leave UKC
show      [attr [val]]        show attributes (or devices with an attribute)
timezone  [mins [dst]]        set timezone/dst
verbose                       toggle verbose booting
?                             this message
UKC> find axe
127 axe* at uhub*|uhub* port -1 configuration -1 interface -1 vendor -1 product 
-1 release -1 flags 0x0
UKC> disable axe
127 axe* disabled
UKC> quit
Continuing...
mainbus0 (root)
acpi at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz, 1596.15 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x13
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x13
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci4 at ppb3 bus 5
ppb4 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x13
pci5 at ppb4 bus 6
ppb5 at pci0 dev 4 function 0 "Intel 5000X PCIE" rev 0x13
pci6 at ppb5 bus 8
ppb6 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x13
pci7 at ppb6 bus 9
ppb7 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x13
pci8 at ppb7 bus 10
ppb8 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x13
pci9 at ppb8 bus 11
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x13
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x13
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x13
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x13
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x13
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x13
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x13
ppb9 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci10 at ppb9 bus 14
bge0 at pci10 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):
 irq 11, address 00:18:fe:28:de:62
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb10 at pci0 dev 28 function 1 "Intel 6321ESB PCIE" rev 0x09
pci11 at ppb10 bus 15
bge1 at pci11 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):
 irq 11, address 00:18:fe:28:de:63
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0
uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub0: 6 ports with 6 removable, self powered
ppb11 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci12 at ppb11 bus 16
vga1 at pci12 dev 2 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 6321ESB LPC" rev 0x09 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3808110AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DV-28E-N, C.6B> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 6321ESB SMBus" rev 0x09 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
usb2 at uhci1: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pckbcintr: no dev for slot 1
rd0: fixed, 3584 blocks
pckbcintr: no dev for slot 1
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
uhid at uhidev1 not configured
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell? s
# ls
.profile     etc          install.sub  sbin         usr
bin          install      mnt          tmp          var
dev          install.md   mnt2         upgrade
# uname -a
sh: uname: not found
# reboot
syncing disks... done
rebooting...

-- 

/ Raimo Niskanen, Erlang/OTP, Ericsson AB