hi!

On Thu, Apr 26, 2007 at 12:23:58PM +0200, Raimo Niskanen wrote:
quoted text
> I have a HP ProLiant DL140 G3 coming in soon, that I really would
> like to run OpenBSD 4.1 on. Its predecessor runs OpenBSD (sparc).
> If I do not succeed it will wind up running SLES 10 and that is
> a pity.
> 
> I have used a snapshot of OpenBSD amd64 from April 24.
> 
> HP ProLiant DL 140 G2 works like a charm with OpenBSD 4.0.
> 
> The problems:
> 

i have seen similar problems on the DL145 G3 with OpenBSD 4.0 and
OpenBSD 4.1.

quoted text
> 1) something with keyboard interrupts. When booting with a
>    PS2 or USB keyboard attached BIOS, CDBOOT and boot(8) works
>    fine, but the kernel gets no keyboard. using
>    boot> boot cd0a:/4.1/amd64/bsd.rd -c gives an
>    UKC> promt but does not respond to keystrokes.
>    
>    First changing the console using
>    boot> set tty com0
>    and then 
>    boot> boot cd0a:/4.1/amd64/bsd.rd -c 
>    gives a serial console that is usable. The dmsg is attached
> 

ukc works fine for me but the final system keyboard doesn't work. the
redirected console via iLO (ESC+Q) works without problems, i didn't
try the serial console.

quoted text
> 2) something with internal USB devices. The axe(4) driver 
>    mistakes something in the server for an USB network card
>    and fails to configure it. Therefore the disabling of
>    the axe device in the following dmsg output. I can live
>    without an axe device so this is not a big problem.
> 

it is not an axe device, it is some internal serverworks virtual stuff
(and i don't need it). the interesting thing is that it reports an
empty device and vendor id (see last line) which is not handled
correctly in the usb stack:

Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ServerWorks(0x1166), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, power 100 mA, unconfigured, SE USB Device(0x0000), ServerEngines(0x0000), rev 0.01

the attach as axe is mostly random, it sometimes attaches as axe(4)
and sometimes as uberry(4) in my DL145 G3...

uberry0 at uhub2 port 2
uberry0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2
uberry0: Charging enabled

quoted text
> At the end of the dmsg there is something concerning keyboard
> interrupts. What can I do about it?
> 

we need to fix this ;)

reyk