Hello all.

I'm trying to set up a firewall/web-proxy/dns-proxy/dhcp-server box at

home, using a quite old i386-based pc (AMD k6-2 300, 256mb RAM, 2x10G

IDE disks) and OpenBSD 4.0.
OS installation, disk management, additional software installation and

configuration... everything went fine.

Problems started in configuring dnsmasq: I managed to make dns

forwarding work ( I really don't need anything more than standard

behaviour), then I created a DHCP range entry:
expand-hosts

domain=manuel.test

dhcp-range=192.168.2.100,192.168.2.200,255.255.255.0,1h
I chose to activate dnsmasq on the "internal" intercace only:
interface=pcn1
pcn1,'s IP address is fixed and compatible with the range specified:
# ifconfig pcn1

pcn1: flags=8843 mtu 1500

        lladdr 00:0c:29:af:4f:47

        media: Ethernet autoselect (autoselect)

        inet 192.168.2.11 netmask 0xffffff00 broadcast 192.168.2.255

        inet6 fe80::20c:29ff:feaf:4f47%pcn1 prefixlen 64 scopeid 0x2
I read that creating a dhcp-range entry in /etc/dnsmasq.conf makes

dnsmasq start the dhcp service automatically, but alas DHCP server

apparently doesn't work: linux and windows clients can't grab IP

addresses and other IP information, and netstat doesn't show anything

listening on port 67/68.
# ps -aux | grep dns

nobody   16166  0.0  0.3   520   648 ??  S     12:58PM    0:00.00 dnsmasq
# netstat -an | grep tcp | grep -v tcp6

tcp        0      0  127.0.0.1.53           *.*                    LISTEN

tcp        0      0  192.168.2.11.53        *.*                    LISTEN

tcp        0      0  127.0.0.1.6010         *.*                    LISTEN

tcp        0      0  192.168.2.11.22        192.168.2.1.48605      ESTABLISHED

tcp        0      0  *.22                   *.*                    LISTEN
What am I missing?
Thank you everybody for your kind help.
Byee,

Manuel